Instruction/ maintenance manual of the product Z2 PC-Link VDO
Go to page of 60
INSTRUCTION MANUAL / BEDIENUNGSANLEITUNG / MANUEL D´INST ALLA TION ET D´UTILISA TION / HANDLEIDING / MANUALE D´INST ALLAZIONE E FUNZIONAMENTO INSTRUKCJA OBSLUGI LICZNIKA / INST ALACION Y OPERACIÓN.
My Settings ✍ AGE: WEIGHT : LIMIT 1: LOW: HIGH: LIMIT 2: LOW: HIGH: LIMIT 3: LOW: HIGH: RECOVERY PULSE: RECOVERY TIME: BIKE 1 WEIGHT : BIKE 2 WEIGHT : BIKE 2 WHEELSIZE: BIKE 1 WHEELSIZE: HOME AL TIT.
Picturebook * W atch out: old batteries requir e special disposal Please read instructions for end-of f-life disposal treatment P01 8x * CD-ROM PC-Sport ONL Y FOR MODELS Z2 PC-LINK / Z3 PC-LINK.
Picturebook Picturebook OPEN CLOSE OPEN CLOSE ! OPEN CLOSE ! P02.
Picturebook OPEN CLOSE ! P03 ONL Y FOR MODELS Z2/Z2 PC-LINK Z3/Z3 PC-LINK.
Picturebook 90° P04/05.
Picturebook P06 UNLOCK LOCK 1.LOCK 2.CLICK 2.UNLOCK.
Picturebook P07 1-5 mm.
Picturebook P08 ONL Y FOR MODELS Z2/Z2 PC-LINK Z3/Z3 PC-LINK.
Picturebook OPEN CLOSE P09 P09-2.
Picturebook WS in mm / inch 1x Tire size WS in mm KMH WS in inch MPH 47-305 16x1,75 1272 50,1 47-406 20x1,75 1590 62,6 34-540 24x1 3/8 1948 76,7 47-507 24x1,75 1907 75,1 23-571 26x1 1973 77,7 40-559 2.
Picturebook P11 ONL Y FOR MODELS Z2 PC-LINK Z3 PC-LINK.
4 EN Congratulations With your selection of a VDO Z2 PC-Link you have opted for high-quality sports information computer . In order to fully bene fi t from the potential of the computer , we recommend that you carefully read this manual. It contains all operating instructions and many useful tips.
5 INSTRUCTION MANUAL T ABLE OF CONTENTS 1.1. General 1.2. Important instructions for the digital wireless system 1.3. Control system - operation 1.3.1. Operating mode 1.3.2. Setting mode 1.4. The display 1.5. Extension options & accessories 2. INSTALLA TION 2.
6 EN 8. RESET MODE 8.1. Resetting trip data 8.2. Reset total ride time 8.3. Resetting the total distance meter 8.4. Resetting the Navigator 8.5. Resetting to factory settings (AC button) 9. OPERATION MODE SELECTION Selecting the operation mode: Bike mode or walk mode 10.
7 INSTRUCTION MANUAL 1.1. GENERAL 1.2 IMPORT ANT INSTR UCTIONS FOR THE DIGIT AL WIRELESS SYSTEM Y our VDO Z2 PC-Link works entirely without cable; it works with triple digital wireless transmission based on well-established ANT+Sport® wireless protocol.
8 EN K 1.3.1. OPERATION MODE - use this mode to display all information Button assignment is shown on the housing. OPERA TION MODE Z2 PC-LINK TRIP DIST RIDE TIME AVG SPEED MAX SPEED CAD AVG CAD MAX CL.
9 INSTRUCTION MANUAL 1.3.2. SETTING MODE - use this mode to make all settings. The assignment of buttons is on the buttons T o go to setting mode: Press button ç for 3 seconds SETTING MODE Z2 PC-LINK or Chap. 6.1. Chap. 9. Chap. 5.4. Chap. 3.3. Chap.
10 EN 1.4. THE DISPLAY The display of your VDO computer is comprised of three large areas. The following information is displayed in operation mode: 3. Footer: DOT ma trix full-text - display of the selected/displayed function - In setting mode menu prompting (chapter 5-11) provides informa- tion about what is shown in the display.
11 INSTRUCTION MANUAL 1.5. EXTENSION OPTIONS & ACCESSORIES Extension option: Y ou have the possibility of extending your computer with the cadence extension set In this case the following cadence .
12 EN 2, and the altitude difference walked. Reprogram this information after inserting the new batteries. 2.1.2 BA TTERY INST ALLATION PULSE-CHEST BEL T >>> P03 Y our VDO is shipped with the battery installed in the pulse-chest belt.
13 INSTRUCTION MANUAL 2.3. PUTTING ON THE PULSE-CHEST BEL T >>> P08 step 1 First connect the one side of the pulse transmitter with the elastic strap, as shown.
14 EN ensure that the electrodes of the pulse transmitter belt are wet, or that the distance between the magnets and the speed/cadence transmitter is not greater than 5 mm. A TTENTION: Y our computer can save the codes of up to 5 transmitters 1. Speed transmitter of bike 1 2.
15 INSTRUCTION MANUAL IMPORT ANT NOTE / Re-open of transmitter search for the receive channel after interruption If no signal is received from an already paired transmitter after 15 minutes (for example riding without chest belt for Z2 and Z3, also PC-LINK models), the receive channel will be closed for this transmitter .
16 EN etc. will be wrong. T o use your VDO computer on two different bikes e.g. mountain bike and road bike you can enter two different wheel sizes. Measuring the wheel circumference: step 1 Align the.
17 INSTRUCTION MANUAL Wheel size set done Display of the actual wheel size in the center bar of the display, right bottom (1 or 2) 5.3. SETTING TOT AL KILOMETERS Y ou can program the total distances into your VDO computer that get lost when changing batteries or that you have previously counted with a different device.
18 EN if you know it from earlier measurements (e.g. at the doctor‘s of fi ce or from a performance test). If you do not know it then you can select automatic calculation of your maximum pulse. WARNING: Automatic calculation is based on average values for people that are athletic and healthy.
19 INSTRUCTION MANUAL 7.PULSE FUNCTION SETTINGS The pulse functions of your VDO computer are based on the speci fi ca- tion of three training programs each with 3 training ranges. Limit 1 = program 1: for recovery training (high 70%, low 50% of max. pulse) Limit 2 = program 2: program for endurance training (high 80%, low 70% of max.
20 EN 7.3. SELECT TRAINING PROGRAM 3 sec. ç Setting mode LANGUAGE SELECT ∂ ƒ PULSE LIMIT SETTINGS ‚ PULSE LIMIT ?SET? ∂ PULSE LIMIT ?SELECT? ‚ LIMIT 1 ?SELECT? or ∂ LIMIT 2 ?SELECT? or ∂ LIMIT 3 ?SELECT? ‚ LIMIT 1/2/3 SET DONE Automatic return to operation mode for the selected timer .
21 INSTRUCTION MANUAL 8.1 TRIP DA T A A TTENTION: When resetting the trip da ta the following day trip data will be deleted: - Daily distance - T rip ride time - Average speed - Maximum speed If the cadence option is mounted then the cadence data will also be reset.
22 EN step 1 Use a sharp pencil step 2 Press the AC button on the back of the computer for 2 sec Reset to factory settings done. 9. OPERATION MODE SELECTION Y our VDO computer uses different measuring and analysis programs for different sport types. Certain functions are not available depending on the selected mode.
23 INSTRUCTION MANUAL BICYCLE FUNCTIONS (button ç ) With the exception of the CLOCK function NO bicyc le functions are available in walk mode. The ç button has no function in walk mode. 10.3.1. ¬ TRIP DIST ANCE = distance of the actual trip Display ç TRIP DIST ANCE Reset: 3 sec.
24 EN BICYCLE FUNCTIONS (button √ ) IMPORT ANT NOTE: NO bicyc le functions except the CLOCK function are available in walk mode. The √ button in walk mode automatically shows the actual time. 10.3.5. CLOCK Setting, see chapter 4.2. (Either in 12h or 24h format; in 12h format am/pm will be shown as well) Display √ CLOCK 10.
25 INSTRUCTION MANUAL 10 .3.13. ¬ £ STOPWA TCH = manual stopwatch Prerequisite: Only after selecting stopwatch, chapter 12.1. Display ≈ STOPWA TCH Start measuring ∫ Press Stop measuring ∫ Press Display pulse data ≈ LIMIT LO HI (values run sequen- tially, automatically in 2 second rhythm) Reset: ∫ Press button for 4 sec.
26 EN 10 .3.18. ¬ £ MAX PULSE = maximum pulse of the actual timing period Prerequisite: Capture only with running or stopped and not deleted stopwatch/timer/countdown/lap timer function Displaying the information ≈ MAX PULSE Reset: ∫ Press button for 4 sec.
27 INSTRUCTION MANUAL 11. RIDING WITH THE NAVIGA TOR With the VDO Naviga tor you can complete trips according to Roadbooks (e.g. Moser Guide). Roadbooks are offered by many publishing houses for fantastic trips (for road bikes as well as mountain bikes) by many publishing houses.
28 EN TIMER 1: Y ou can program a time e.g. for interval training. TIMER 1 counts from zero forward. At the end of TIMER 1 there is a single beep. Timer 1 only functions if you have set a time. If you have forgotten to set a time your VDO computer displays TIMER ERROR TIMER 2: Y ou can program a time, e.
29 INSTRUCTION MANUAL ‚ TIMER ?SELECT? ∂ TIMER ?SET? ‚ TIMER 1 ?SET? ∂ TIMER 2 ?SET? Select ‚ TIMER ?SET? ‚ SET HOUR ?CONTINUE? ∂ ƒ Setting hours (keep button depressed for fast run- th.
30 EN 12.5. LAP-TIMER The LAP timer must fi rst be started with the ∫ button. T o save the LAP data press buttons ≈ + ¥ at the same time on the desired points of the training unit.
31 INSTRUCTION MANUAL TIP: At the end of the training unit measure the recovery time or the recovery pulse to determine your training status. See 7.4. Recovery time and recovery pulse Note: All bic ycle altitude and pulse function can also be called up during timer operation via the ç √ ¥ ≈ buttons.
32 EN 13.3. TRAINING WITH THE COUNTDOWN TIMER: The countdown timer is a programmable timer with reverse counting. This is particularly well-suited for use in time trials.
33 INSTRUCTION MANUAL display in recall mode after concluding the measurement. 2. If the lap timer is running the residence period of the pulse frequency in the selected training ranges is recorded (compare 12.1) step 1 Preparing the recording: - Set the training ranges automatically chapter 7.
34 EN 14. THE DA TA RECORDING FUNCTION & TRANSFER OF DA T A TO THE PC Y our VDO computer is designed for recording data and transferring data to your PC.
35 INSTRUCTION MANUAL TIP: Leave your VDO computer on the handlebar holder so that sleep mode is activated and recording is interrupted automatically after 5 minutes (see chapter 15 Sleep mode).
36 EN 15. SLEEP MODE Y our VDO computer has a two-stage sleep mode. Sleep mode is activa- ted automatically if the computer no longer receives data. Phase 1 after 5 minutes: - The display goes into sleep mode - DA T A RECORDING is interrupted Now the display shows time, date, and day of the week.
37 INSTRUCTION MANUAL No speed display - Check the magnet position (distance between magnet and transmitter , position of the magnet to the transmitter point on the transmitter) - Check the battery in.
38 EN No pulse percentage of the personal maximum pulse Personal data has not been set, timer has not been started No data relative to training times is in the set training ranges Timer has not been started.
39 INSTRUCTION MANUAL 17. GUARANTEE CONDITIONS VDO Cycle P arts offers a 5-year guarantee on your VDO computer , starting from date of purchase. The guarantee extends to material and manufacturing defects on the computer itself, on the docking station, on the transmitters and on the handlebar and wrist band holder .
269 INST ALACION Y OPERACIÓN MANUAL 18. ESPECIFICACIONES TECNICAS Ciclocomputador: A proximadamente 49,6 x 46,6 x 16,5mm, peso: Aproximadamente 45g Soporte manillar: Peso aproximado 15g T ransmisor d.
#56'.'%64+%#..'%6410+%37+2/'06 22.+%#$.'+06*'7412'#00+10#0&16*'47412'#0%17064+'59+6*5'2#4#6'%1.
2 4'<+&774+2418'0+0&&+0#2#4#674i'.'%64+%ih+'.'%6410+%i #4%#,'.'&'2'#%'56241&755#7/'0g+10#6'O0+05647%g+70+.
4+=76+'.'664+%+'&'.'66410+%+ 22.+%#$+.'+0+2#'5+&'.."0+10'7412'#'+037'.
% ', '.'-64+.+56',#'.'-64110+.+56'5'#&/'6',FF6/'& '.
#11# 0- 01.+'616#5'.'-64+5-c570'.'-6410+5-c5+'4b%'5 <+<564c&c,7/#8#+6#/2+'8+'016#,c5+05647-%+,c5&16#+5/#4a`,7/5014c&# -k610'&4b-56.
)( '5N&71&'37+2#/'0615.K%64+%15'.'%64Q0+%15 56#/#4%# #24'5'06#ә&761170#57#.
# # 1&2#&0#'.'-64+u0#+0'.'-64105-#124'/# <0#-#0#+<&'.-7#.+524'/.
D EU-Konformitätserklärung Wir , CYCLE P ARTS GmbH, Grosse Ahlmuehle 33, D-76865 Rohrbach erklären, dass die VDO Fahrradcompu- ter mit Funkübertragung VDO Z1, Z2, Z3, Z2 PC-Link, Z3 PC-Link und al.
66023 66023 ADDENDUM TO USER MANUAL USA CDN NOTICE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
6604 6604 ADDENDUM TO USER MANUAL USA CDN NOTICE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FOR RUNNING / HIKING VDO SERIES-Z www .vdocyclecomputing.com C Y C LE C OMPUTING.
An important point after buying a device VDO Z2 PC-Link (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought VDO Z2 PC-Link yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data VDO Z2 PC-Link - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, VDO Z2 PC-Link you will learn all the available features of the product, as well as information on its operation. The information that you get VDO Z2 PC-Link will certainly help you make a decision on the purchase.
If you already are a holder of VDO Z2 PC-Link, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime VDO Z2 PC-Link.
However, one of the most important roles played by the user manual is to help in solving problems with VDO Z2 PC-Link. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device VDO Z2 PC-Link along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
