Instruction/ maintenance manual of the product M1 WL VDO
Go to page of 26
1 M1 WL www .vdoc yc lecomputing.com/ser vice ENGLISH Installation video Operating video Settings video.
2 M1 WL Preface P ack contents T able of contents Congratulations In choosing a VDO computer , you have opted for high-quality device with first rate technology . T o optimally use the computer , we recommend that you read this manual carefully . It contains full operating instructions and many useful tips.
3 M1 WL Display The VDO M1 WL has a large, easy-to-read display that can be divided into three areas. – The top line of the display shows the value for the selected function. – The middle line displays “am” or “pm” if the 12-hour clock format is used.
4 M1 WL Functions The VDO M1 WL has the following functions Current speed With a wheel circumference of 2,155 mm, the maximum possible speed is 199 kmh or 124 mph. Current distance The current distance counts up to 999.99 km or miles. If this maximum value is exceeded, the counter restarts the current distance calculation at zero.
5 M1 WL 1x SET BIKE Operation while cycling While cyc ling, the display functions can be accessed by pressing the BIKE button. Pressing the BIKE button shows the next function on the display . Only ONE function at a time is shown on the display . T o once again display the speed, the SET button must be pressed .
6 M1 WL 90° 3 3 4 4 1 2 1 Attaching the handlebar bracket Y ou can attach the computer to the right or left of the handle- bars or the centre of the stem. Attach the handlebar bracket in the corresponding position. STEP 1 Decide whether you want to attach the computer to the handlebars or the stem.
7 M1 WL 90° ° ✔ ✘ MAGNET Attaching the speed transmitter The transmitter can be attached to the fork leg on the right or left. Note: If you hav e attached the computer to the stem or the left of the handlebars, the speed transmitter MUST be attached to the LEFT fork leg.
8 M1 WL . L OCK . CLICK . UNL OCK UNL OCK L OCK Inserting the computer into the bracket The VDO twist-click system securely connects the computer to the handlebar bracket. How to insert the computer: STEP 1 Place the computer into the bracket in a 10 o’clock position.
9 M1 WL Sleep mode and wireless receiver If you take a break and the M1 WL is still in the handlebar bracket the computer switches to standb y mode after five minutes . The wireless receiver is still ON . This can be seen from the flashing antenna icon .
10 M1 WL Settings – language The following display languages can be selected for the VDO M1 WL: – German – English – French – Italian – Spanish – Dutch – Polish How to select the language: Press and hold the SET button until the settings menu opens.
11 M1 WL 1x Y ou can set the roll circumference of your wheel on the VDO M1 WL. The more accurate this setting, the more accurate your speed indicator and the measurement of the distance you have travelled. Y ou can find the values for your wheels in the wheel size table and set these in the device.
12 M1 WL How to set your wheel circumfer ence: Press and hold the SET button until the settings menu opens. Settings – wheel circumference “Language” appears on the display . Press the BIKE button to scroll to the setting for the wheel circumference.
13 M1 WL Press the SET button to confirm your setting. The final digit on the right now flashes. Press the BIKE button to set this digit. Settings – wheel circumference Press the SET button to confirm your setting. Y our wheel circumference setting is now complete.
14 M1 WL Use the unit settings to specify whether the speed should be displayed in kmh or mph. Press and hold the SET button until the settings menu opens. Settings – unit “Language” appears on the display . Press the BIKE button to scroll to the setting for the unit.
15 M1 WL In the VDO M1 WL, you can set the clock in 12-hour AM/PM format or 24-hour format. Press and hold the SET button until the settings menu opens. Settings – clock “Language” appears on the display . Press the BIKE button to scroll to the setting for the clock.
16 M1 WL Press the BIKE button to set the hours. Settings – clock Press the SET button to confirm the hour setting. The minutes then flash. Press the BIKE button to set the minutes. Press the SET button to confirm the minute setting. The response “Set Ok” appears on the display .
17 M1 WL Press the BIKE button to set the hours. The display information changes from “pm” to “am” at “12” . Settings – clock Press the SET button to confirm the hour/AM-PM setting. The minutes now flash on the display . Press the BIKE button to set the minutes.
18 M1 WL “Language” appears on the display . Press the BIKE button to scroll to the setting for the speed indicator . “ Auto Speed” appears on the display . Settings – speed indicator settings T o access the setting, press the SET button . The setting opens.
19 M1 WL “Language” appears on the display . Press the BIKE button to scroll to the setting for the total distance. Settings – setting the total distance Press the SET button to open the settings. The left digit flashes. Press the BIKE button to change the digit.
20 M1 WL Resetting trip data after the trip After each trip, you can reset the data for this trip to zero. The VDO M1 WL is then ready for the next trip. A TTENTION: your total distance (total number of kilometres ridden) is not reset to zero. The process is as follows: Press and hold the BIKE button for a few seconds .
21 M1 WL ! OPEN CL OSE NEW OLD SEC. 1 2 3 Low battery indicator The M1 WL has a low batter y warning. The text “Computer low” appears on the display . Press the BIKE button to acknowledge this low ba ttery warning. Y ou can keep using the cyc le computer for approx.
22 M1 WL ! OPEN CL OSE OLD NEW SEC. 1 2 3 Replacing the battery in the speed transmitter The batter y in the speed transmitter should be replaced annually to guarantee seamless wireless transmission. Y ou need a 3 V 2032 batter y . We recommend using a branded battery from Sony , Panasonic, V arta or Duracell.
23 M1 WL T erms of guarantee VDO Cycle P arts offers a two-year guarantee on your VDO computer , starting from the date of purchase . This guarantee covers material and processing defects on the computer itself, the sensor/transmitter and the handlebar bracket.
24 M1 WL T roubleshooting Error P ossible cause Correction Half segments on the display (e.g. after a batter y change) Computer software not running correctly after batter y change Remove and re-inser.
25 M1 WL Correct disposal of this product (electrical waste) (T o be used in EU countries and other European countries with a separate collection system). The labelling on the product and the relevant literature indicates that it must not be disposed of with normal house- hold waste at the end of its ser vice life.
www . vdocyclecomputing .com Cycle P arts GmbH Le Quartier Hornbach 13 67433 Neustadt/W einstrasse (German y) +49 (0) 63 21- 95 82 7 - 0.
An important point after buying a device VDO M1 WL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought VDO M1 WL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data VDO M1 WL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, VDO M1 WL you will learn all the available features of the product, as well as information on its operation. The information that you get VDO M1 WL will certainly help you make a decision on the purchase.
If you already are a holder of VDO M1 WL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime VDO M1 WL.
However, one of the most important roles played by the user manual is to help in solving problems with VDO M1 WL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device VDO M1 WL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
