Instruction/ maintenance manual of the product CHM 604 MP3 VDO Dayton
Go to page of 12
.
.
.
2 PRECAUTIONS INTRODUCTION English GENERAL CDC603A Aug.06-03 This CD changer is designed for use only with car radios which have CD changer controls based on either the DIGITAL (SPDIF) or ANALOG standard. Consult your dealer for suitable types of car radio.
GB 3 FIXING MA TERIAL SUPPLIED Fig. 2 Only use screws and fixing material supplied! A 2 L-shape brackets B 2 base-plate C 4 washer screw D 4 nut E 4 tapping screw F 2 dust protection sticker G 4 adhesive label REMOVING TRANSPORT SCREWS Fig. 1 Remove the three transport screws from the underside of the CD changer .
4 SHOCK ABSORBER ADJUSTMENT Be sure to adjust Mounting Angle Setting Lever to appropriate angle(Fig.4,5,6); 0° for horizontal, 22.5° angle, 45° angle, 67.5° angle, 80° angle,or 90° angle for vertical. After setting the position of the shock absorbers, glue the supplied sticker F over the holes of the setting mechanisms.
GB shelf. Caution: Take care not to drill into the fuel tank, the exhaust pipe system, the catalytic converter or the cables laying behind or below any drilled holes! MOUNTING IN THE LUGGAGE BOOT MOUNTING IN SUSPENDED POSITION The CD changer can also be mounted on the underside of a flat surface, e.
6 MOUNTING Ensure that the negative car battery terminal is disconnected. Connect the car radio as described in the car radio ' s mounting instructions. Connect the blue plug C3 of the extension cable to the rear of the car radio (socket C3') (fig.
GB OPERA TION FILLING THE CARTRIDGE Pull the tab on the cartridge 's disc tray to remove one of the trays. INSERTING THE CARTRIDGE Open the sliding door . TAKING OUT THE CARTRIDGE 4 3 2 1 4 3 2 1 3 2 1 Place the disc on the tray with the label side up Each tray can accommodate only one disc.
OPERATION 1 2 8 CDC603A Aug.06-03 MANU AL EJECT HANDLING DISCS Do not drop discs. Keep discs free from dirt and fingerprints. Scratched discs may cause skipping of music parts. Do not glue paper or labels on discs. Do not write on discs. Do not play damaged or deformed discs.
9 TROUBLESHOOTING GB * Scan-time adjustments made at the headunit are not supported. This changer will always use a 10-second scan-time. An error made in operation or in the connections is sometimes mistaken for a failure or breakdown. Perform the checks described in the following table before calling a Service Agency.
10 SPECIFICATIONS LASER PRODUCT CLASS 1 CDC603A Aug.06-03 CHM 604 MP3 Compatible CD types: 12cm CD, CD-R and CD-RW Compressed digital audio: MPEG 1/2 layer 3 (MP3), ID3 Tag v1.0 and 2.0 Microsoft Window Media Audio up to v8.0 (WMA), WMA text * Protected WMA files are not be supported.
An important point after buying a device VDO Dayton CHM 604 MP3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought VDO Dayton CHM 604 MP3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data VDO Dayton CHM 604 MP3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, VDO Dayton CHM 604 MP3 you will learn all the available features of the product, as well as information on its operation. The information that you get VDO Dayton CHM 604 MP3 will certainly help you make a decision on the purchase.
If you already are a holder of VDO Dayton CHM 604 MP3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime VDO Dayton CHM 604 MP3.
However, one of the most important roles played by the user manual is to help in solving problems with VDO Dayton CHM 604 MP3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device VDO Dayton CHM 604 MP3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
