Instruction/ maintenance manual of the product Cytec C05+ VDO Cyclecomputing
Go to page of 20
BEDIENUNGSANLEITUNG INSTRUCTION MANUAL MANUEL D´INST ALLA TION ET D´UTILISA TION MANUALE D´INST ALLAZIONE E FUNZIONAMENTO INST ALACION Y OPERACIÓN MANUAL HANDLEIDING NÁVOD K MONTÁŽI A OBSLUZE I.
1 GB INST ALLA TION AND OPERA TION MANUAL - VDO CYTEC C05+ Preface Thank you for buying a VDO CYTEC bicycle computer . The more familiar you get with this model, the more enjoyable your trips are going to be. Please read thoroughly all the information provided in this manual.
GB 2 W arning: Before tightening the handlebar holder , make sure to adjust the position of the computer head (inclination) when the LCD-display is best visible for you.
3 GB 1.2 Mounting the speed transmitter / sender The sensor should be mounted on the same side of the fork as the holder is on the handlebar . Make sure to position the respective rubber shim between fork and sender , position the curved back of the sender next to the spokes and make sure the sender is aimed at the receiver (computer head).
GB 4 1.3 Mounting the spoke magnet Distance between magnet and sensor should be approx. 1-5 mm. In case this distance is not achievable in the current positioning, slide the sensor and the magnet on the fork or spoke accordingly .
5 GB 1.4 Installing battery into computer head T o save battery power , your VDO CYTEC C05+ comes with the battery not yet fitted. Prior to initial use you have to install the battery first.
GB 6 1.5 Function Indicator Y our VDO CYTEC C05+ features a function indicator ((1)). When you are done mounting the computer , ((1)) flashes at the first rotation of the wheel. When the wheel-size is properly entered, actual speed is displayed as well.
7 GB UNLOCK LOCK 1.LOCK 2.CLICK 1.PRESS 2.UNLOCK.
GB 8 3. Information features of your VDO CYTEC C05+ Y our VDO CYTEC C05+ provides you with following information: KMH-MPH current speed indicated in either KMH or MPH, featuring automatic conversion into MPH DST trip counter , counts your trip distance up to 999,99 km or miles.
This button / key has several functions. All functions of the button / key are outlined in the chart below . Y our display Button / Key to Length of pushing What is going on? indicates following be pushed the button / key information DST -ODO-CLK-A TM push MODE key brief (0.
GB 10 5.1 Programming (setting up) your wheelsize In order for the VDO CYTEC C05+ to indicate your actual speed and your trip distance, the correct wheelsize has to be entered.
11 GB W atch out: In case you have selected MPH readout you must enter your wheelsize in mm. WS in mm 1x.
GB 12 5.3 Entering your wheelsize / entering odometer After initially installing the battery or after a battery change, your VDO CYTEC C05+ automatically switches into set-up mode for wheelsize and odometer .
13 GB In case you wish to enter the precise wheelsize you have measured yourself (i.e. 2257), please proceed with step 5. Step 5 : Not pressing the MODE button with in 2 seconds will make the last digit (212 4 ) flash and change the value (4-5-6-7...) Once the correct digit (7) comes up, press the mode button.
GB 14 Press immediatly 5 times to end Press to Stop switch to ne xt Press to Stop switch to ne xt Press to Stop switch to ne xt Press to Stop switch to ne xt Press to Stop switch to ne xt Please wait 2 sec.
15 GB 5.4 Setting the clock CLK Y our VDO CYTEC C05+ features a clock with hour and minute display in 24 h mode T o access the clock set-up mode proceed as follows: Step 1: call in the CLK information into your display Step 2: Press the MODE button for 5 sec.
6. Resetting information to zero The following information may be reset to zero with your VDO CYTEC C05+: DST = trip distance A TM = trip counter W atch out: Both these information are simultaneously reset to zero T o reset either DST or A TM, one of these informations has to be displayed.
Hg 17 GB 8 . Battery change Tip: T ake down your total distance and wheelsize prior to battery change. 8.1 Changing the battery in the computer head see chapter 1.4. W atch ou t : old batteries require special disposal 9. T roubleshooting This chart outlines possible malfunctions, their causes and solutions.
GB 18 8 . Battery change Tip: T ake down your total distance and wheelsize prior to battery change. 8.1 Changing the battery in the computer head see chapter 1.4. W atch ou t : old batteries require special disposal 9. T roubleshooting This chart outlines possible malfunctions, their causes and solutions.
19 GB Contents 1 computer head 1 handlebar holder with screw 1 wireless transmitter with battery 12 V , type V23GA 1 rubber shim for sensor mount 1 spoke magnet 5 cable ties 1 battery 3 V , type CR 2032 1 installation and operation manual TIP The CYTEC tin box easily holds a mini-tool and a spare tube to carry on with your ride.
An important point after buying a device VDO Cyclecomputing Cytec C05+ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought VDO Cyclecomputing Cytec C05+ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data VDO Cyclecomputing Cytec C05+ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, VDO Cyclecomputing Cytec C05+ you will learn all the available features of the product, as well as information on its operation. The information that you get VDO Cyclecomputing Cytec C05+ will certainly help you make a decision on the purchase.
If you already are a holder of VDO Cyclecomputing Cytec C05+, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime VDO Cyclecomputing Cytec C05+.
However, one of the most important roles played by the user manual is to help in solving problems with VDO Cyclecomputing Cytec C05+. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device VDO Cyclecomputing Cytec C05+ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
