Instruction/ maintenance manual of the product UGTS110 Vantec
Go to page of 8
7.1 Channel PCIe Sound Card User Manual Model: UGT -S1 10 All brand name s and trademarks a re properties of their res pective owners. www .vantecusa.com.
UGT ‐S110 P age2 Features z Full-duplex playback and record ing z Full-duplex 8CH DAC/2CH ADC z Support 48/44.1 KHz sampling rate for both playback and recording z Supports the latest Dolby® Di gital EX and DTS ES 6.1/7.1 CH DVD soundtrack playback z DirectSound™ 3 HW acceleration z Compliant with PCI Express Base Specification 1.
UGT ‐S110 P age3 z Installation Guide x 1 z Driver CD x 1 * User ’ s Manual Is on Driver CD Note: Contents may vary depending on the market/countr y . Hardware Inst allation 1. T urn off the com puter , Unplug the power cord. 2. Open the computer case.
UGT ‐S110 P age4 1. Start your PC, plac e the Driver CD into the CD-ROM drive. Click the St a r t button on the taskbar and click Run . T ype “D: UGT -S1 102000_XP_2003_V ista_7Setup. exe” . (Assuming you have placed the CD in CD-ROM drive labeled as D).
The rear panel of this 7.1 Chann e l PCIe Sound Card has the following jacks: 1. Line In (blue): Connect to tape/CD/DVD player , or other audio sources for output mixing and/or recording 2. MIC In (pink): Connect to microphone 3. Line Out (green) : Connect to h eadphone or amplifying speakers.
UGT ‐S110 P age6 5. Center/Subw oofer (orange) : Connect to center/subwoofer speakers while 6/8 chann el speaker mode is enabl ed (via external amplifier) 6. Back-Speaker (gray) : Connect to back speakers while 8 channel speaker mode is enabled (via external amplif ier) 7.
Port 2-channel 4-channel (*) 6-channel 8-channel Green Line Out Front Speaker Front Speaker Front Speaker Black - Rear Speaker Rear Speaker Rear Speaker Orange - - Center /Subwoofer Center /Subwoofer Gray - - - Back Speaker (*) 4-Channel mode is not avail able on V ista/7 (32/64 bit) In addition to the rear panel jacks, this 7.
UGT ‐S110 P age8 W arranty The V antec 7.1 Channel PCIe Sound Card comes wit h a 1 year limited warranty(90 day parts). I f your unit becomes defective within that time frame, please go to www .vantecusa.co m for information on how to receive warranty exchange or rep air .
An important point after buying a device Vantec UGTS110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vantec UGTS110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vantec UGTS110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vantec UGTS110 you will learn all the available features of the product, as well as information on its operation. The information that you get Vantec UGTS110 will certainly help you make a decision on the purchase.
If you already are a holder of Vantec UGTS110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vantec UGTS110.
However, one of the most important roles played by the user manual is to help in solving problems with Vantec UGTS110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vantec UGTS110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
