Instruction/ maintenance manual of the product UGT-CR960 Vantec
Go to page of 8
1 Multi-Memory Intern al Card Reader w/USB2.0, eSATA, Audio Ports Model No.: UGT-CR960 Installation Guide v1.02.
2 System Requirement • Microsoft Windows XP/Vista/7(32/64 Bit) • Mac OS x 10.4+ Package Content • Vantec Multi-M emory Internal C ard Reader w/USB2.
3 •Step 2: Install the screws to card reader, both left and right(refer to above photo) Step 3: Put the card reader inside the bracket, tight en the screws.
4 Proceed with caution. Danger to life! Switch of f the computer in which the product is to be installed and all connected devices. Disconnect all devices from the mains voltage and pull out the main AC p o we r co r d! Just turning off at the on/off switch is not enough! • Open your com puter ’s housing and carefully remove the cover .
5 -9pin USB plug -USB 9pin pinouts Most motherboard use cable pinout, some motherboard have slot for fixing it • Connect the Audio plug connector wi th a free Audio connection of your motherboard. Please also note the operating instructions of the motherboard.
6 -Audio Plug -Audio pinout • Connect the SA T A plug connector wi th a free SA T A connection of your motherboard. Please also note the ope rating instructions of the motherboard.
7 • If your computer does not start correctly , switch it off again immediately and check all t he settings and cable connections. It must be disconnected from the mains power supply before restarti.
8 Warranty: Th e Multi-Memory Internal Card Reader w/ USB2.0, eSA TA, Audio Po rts comes with a 1 year limited warranty . If your unit should become defective within that time frame, please go to http://www.vant ecusa.com for information on how to receive warranty exchange or repair.
An important point after buying a device Vantec UGT-CR960 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vantec UGT-CR960 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vantec UGT-CR960 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vantec UGT-CR960 you will learn all the available features of the product, as well as information on its operation. The information that you get Vantec UGT-CR960 will certainly help you make a decision on the purchase.
If you already are a holder of Vantec UGT-CR960, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vantec UGT-CR960.
However, one of the most important roles played by the user manual is to help in solving problems with Vantec UGT-CR960. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vantec UGT-CR960 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
