Instruction/ maintenance manual of the product T111B Acer
Go to page of 64
Acer Projector P5403/N243/PN-SX12/S5201M/ T111B/PS-X11M Series User's Guide.
Copyright © 2010. Acer Incorporated. All Rights Reserved. Acer Projector P5403/N243/ PN-SX12/S520 1M/T111B/PS-X1 1M Series User's Guide Original Issue: 07/ 2010 Acer Projector P5403/N2 43/PN-SX12/S5201M/T111B/PS-X1 1M Series Acer and the Acer logo are re gi stered trademarks of Acer Incorporated.
iii Information for Your Safety and Comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instruct ions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning.
iv • To avoid damage of internal componen ts and to prevent battery leakage, do not place the product o n a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected sho rt current or damage rotor devices, lamp.
v Product servicing Do not attempt to service this product yourself, as opening o r removing covers may expose you to dangerous vo ltage points or other risks.
vi might cause fire or electric shock. In this case, unplug immediately and contact your dealer. • Do not keep using this product to break or drop it. In this case contact your dealer for inspection. • Do not face the projector lens to the sun. It can lead to fire.
vii Caution for Listening To protect your hearing, follow these instructions. • Increase the volume gradually until you can hear clearly and comfortably. • Do not increase the volume level af ter your ears have adjusted. • Do not listen to music at high volumes f or extended periods.
viii First Thing First Usage Notes Do : • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Information for Your Safety and Comfort iii First Thing First viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Contr.
Troubleshooting 34 LED & Alarm Definition Listing 38 Replacing th e Lamp 39 Ceiling Mount Install ation 40 Specification s 43 Compatibility Modes 45 Regulations and safety notices 49.
1 English Introduction Product Features This product is a single-chip D LP ® projector, including the followin g outstanding features: • DLP ® technology • S5201M/T111B/PS-X11M: Native 1024 x 76.
2 English Package Overview This projector comes with all the i tems shown below. Check to make sure you have them all. Contact your dealer imm ediately if any thing is missing.
3 English Projector Overview Projector Outlook Front / upper side Rear side # Description # Description 1 Power key and Power indicator LED 5 Control pan el 2 Projection lens 6 Zoom ring 3 Elevator bu.
4 English Control Panel # Function Description 1 LAMP Lamp indicato r LED 2 POWER Power indicator LED 3 Power key Refer to the "Turning the Projector On/ Off" section. 4 Keystone Adjusts image distor tion caused by tilting projection (±40 degr ees).
5 English Remote Control Layout # Function Description 1 Infrared transmitter Sends signals to the projector. 2 POWER Refer to the "Turning the Projector On/Off" section. 3 FREEZE To pause the screen image. 4 RESYNC Automatically synchronizes the projector to the in put source.
6 English 11 Rewind Play/Pause Stop Fast-forward Rewinds/Plays/Pauses/Stops/Fast-forwards the playing media files. 12 VGA To change source to V GA. This connector supports analog RGB, YPbPr (480p/576p/72 0p/1080i/1080p), and YCbCr (480i/576i). 13 COMPONENT To change source to Component video.
7 English Getting Started Connecting the Projector • P5403/N243/PN-SX12 Note: To ensure the projector works well with your comp uter, please make sure the timing of the display mode is compatible with the projector.
8 English • S5201M/T111B/PS-X11M Note: To ensure the projector work s well with your computer, please make sure the timing of the display mode is compatible with the projector.
9 English Turning the Projector On/Off Turning On the Projector 1 Remove the len s cap. 2 Ensure that the power co rd and signal cable ar e securely connected. The Power LED will ligh t red. 3 Turn on the proje ctor by pressing (POWER) on the control p anel or remote control, and the Power indicator LED will turn blue.
10 English Turning Off the Projector 1 To turn the projector off, press the power button. This message appears: "Please press the power button again to complete the shutdown process.
11 English Adjusting the Projected Image Adjusting the Height of the Projected Image The projector is equipped with an elevator foo t for adjusting the image height. To raise the i mage: 1 Press the elevator button. 2 Raise the image to the desired hei ght angle, then release the button to lock the elevator foot into position.
12 English How to Optimize Image Size and Distance Consult the table below to find the optimal im age sizes achievable when the projector is positioned at a desired distance from the screen. • P5403/N243/PN-SX12 If the projector is 3 m from the screen, good image quality is possible for image sizes between 75" and 98".
13 English • S5201M/T111B/PS-X11M If the projector is 3 m from the screen, good image quality is possible for image sizes around 242". Note: Remind as below figure, the space of 480 cm height is required when located at 3 m distance.
14 English How to Get a Preferred Image Size by Adjusting Distance and Zoom The table below shows how to ach ieve a desired image size b y adjusting either the position or the zoom ring. • P5403/N243/PN-SX12 To obtain an image size of 50" set the projector at a distance b etween 1.
15 English • S5201M/T111B/PS-X11M To obtain an image size of 50" set the projector at a distance 0.6 m from the screen. Desired Image Size Distance (m) Top (cm) Diagonal (inch) < A > W ( cm) x H (cm) Max zoom < B > Min zoom < C > From base to top of image < D > 30 61 x 46 0.
16 English User Controls Installation Menu The installation menu provides an on screen display (OSD) for projector installation a nd ma inte nance. Use the OSD on ly when the message "No signal input" is disp layed on the screen. 1 Turn on the proje ctor by pressing (POWER) on the control p anel or remote control.
17 English Acer Empowering Technology Empowering Key Acer Empowering Key provides three Acer unique functions: "Acer eView Management", "Acer eTimer Management", "Acer eOpening Management" and "Acer ePower Management".
18 English Onscreen Display (OSD) Menus The projector has multil ingual Onscre en Display (OSD) men us that a llow you to make i mage adjustments an d change a vari ety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the control p anel or remote control.
19 English Color Display Mode There are many factory presets optimized for various types of images. • Bright: Fo r brightness optimizati on. • Presentation: For meeting presentation with higher brightness . • Standard: For common envir onment. • Video: For pla ying video i n a bright envi ronment.
20 English Note: "Saturation" and "Tint" fun ctions are not supported und er computer, or HDMI (PC) mode. Note: "HDMI Color Range" is onl y available when the input si gnal is HDMI. Color R Adjusts the red color. Color G Adjusts the green color.
21 English Image Projection • Front-Desktop: The factory default setting. • Front-Ceiling: When you select this function , the projector inverts the image for ceiling-m ounted projection . • Rear-Desktop: When you select this function, the projector reverses the image so that you can project behind a translucent screen.
22 English H. Position (Horizontal Position) • Press to move the image left. • Press to move the image right. V. Position (Vertical Position) • Press to move the image down. • Press to move the image up. Frequency Changes the projector’s refresh rate to match the frequency of your computer’s graphics card.
23 English Note: "H. Position", "V. Position", "Frequency" and " Tracking" functions are not supported under vi deo mode. Note: "Sharpness" function is not supported under com puter mode. Note: The 3D function is support ed by VGA source only.
24 English Screen Capture Use this function to customize the startup screen. To capture the image that you want to us e as the startup screen, follow the instructions below.
25 English Security Security This projector provides a usef ul sec urity function for the administrator to manage the projector. Press to change the "Security" setting. If the security function is enabled, your must enter "Administrator Password" first before changing the security setting.
26 English Administrator Password You can enter "Administrator Password" when the "Enter Administrator Password" or "Enter Password" dialogue box is displayed . • Press to change "Administrator Password". • The factory default of "Administrator Password" is "1234".
27 English Interactive Pen Setting (for S5201M/ T111B/PS-X11M) The Interactive Pen can work in place of yo ur regular computer mouse. Just hold the pen in yo ur hand, and point it at the projected image to poin t, click, and drag. It gives you more flexibility to operate your computer without standing next to it.
28 English LAN Setting (for P5403/ N243/PN -SX12) To connect your projector to the network: 1 Take a RJ45 cable and conn ect one end to the LAN input jack of the projector and the oth er end to the RJ45 port. 2 Enter the LAN Setting menu. The "Enter Administrator Password" dialogue box i s displayed.
29 English About LAN Setting (for P5403/N243/PN-SX12) Note 1 : An overview of the re mote networ k operation page Note 2 : An overview of the Tools page LAN IP/Mask (for S5201M/ T111B/PS-X11M) • Identify IP and Mask address. LAN Reset (for S5201M/ T111B/PS-X11M) • Reset LAN functio n.
30 English Note 3: The Info page shows the projector infor mation and status. About Interactive Pen Setting Note 1: Preparations 1. Connect the projector and your comput er with a USB cable and VGA cable. 2. Turn on your project or and make suer it is displaying the computer ’s image.
31 English Note 5: Other n otes about using the pe n 1. Avoid standing too far from the screen. The cl oser you are to the screen, the bett er perf ormance the pen h as. 2. Hold the pen the way yo u hold a remote contro l or a pen. 3. A full battery charge takes 6-8 hours and will allow 20-40 hours non-stop use.
32 English Audio Volume • Press to decrease the projector speaker volume. • Press to increase the projector speaker volume. Micropho ne Volume (for S5201M/T111B/ PS-X11M) • Press to decrease the microphone volume. • Press to increase the microphone volume.
33 English Timer Language Timer Location Sets the location of the timer on the screen. Timer Start (or Stop) Press to start or stop the timer. Timer Period (Minutes) Press to adjust the timer period. Timer Volume Select this function to ad just the notification volume when the timer function is enabled and time is up.
34 English Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the follo wing troubleshooting guide. If the problem pe rsists, please contact your local reseller or service center.
35 English 3 Partial, s crolling or incorrectly displayed image (For notebooks) • Press "RESYNC" on the contr ol panel or remote control. • For an incorrectly displaye d image: • Follow the steps for item 2 (above) to adjust the resolution of your computer.
36 English Problems with the Projector 9 Image is too sma ll or too large • Adjust the zoom lever on the top of the proj ector. • Move the projector closer to or further from the screen. • Press "MENU" on the control pan el or remote control.
37 English OSD Messages # Condition Message Rem inder 1 Message Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. P lease also check the dust filters if they are installed.
38 English LED & Alarm Definition Listing LED Messages Message Power LED Lamp LED Temp LED Red Blue Red Red Standby (Power cord plugged in) V- - - - - - Power on -- V -- -- Lamp retry - - Quick fl.
39 English Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life itself. It will show you a warning message "Lamp is approach ing the end of its useful life in full powe r operation.
40 English Ceiling Mount Installation If you wish to install the projector using a ce iling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included.
41 English 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow fo r proper heat distribution.
42 English 5 Adjust the angle and po sitioning as necessary. Note: The appropriate type of screw and washer for each mo del is listed in the table below.
43 English Specifications The specifications below are subject to change without notice. For final specs, please refer to Acer's marketing documentation.
44 English *Design and specifications are subject to chan ge without notice. Dimensions (W x D x H) • P5403/N24 3/PN-SX12: 290 x 255 x 125 mm (11.4" x 10.0" x 4.9") • S5201M/T111B/PS- X11M: 290 x 254 x 98.5 mm (11.4" x 10.0" x 3.
45 English Compatibility Modes 1 VGA Analog - PC Signal Mode Resolution V.Frequency [Hz] H.Frequency [KH z] VGA_60 640 x 480 59.940 31.469 VGA_72 72.809 37.861 VGA_75 75.000 37.500 VGA_85 85.008 43.269 VGA_70 720 x 400 70.087 31.469 VGA_85 85.039 37.927 SVGA_56 800 x 600 56.
46 English 2 DVI-D & HDMI (HDCP) Timing MAC19 1024 x 768@75Hz 75.020 60.241 MAC21 1152 x 870@75Hz 75.061 68.681 WXGA_60 1280 x 768 59.870 47.776 WXGA_75 74.893 60.289 WXGA_85 84.837 68.633 WXGA_60 1280 x 720 60.000 45.000 WXGA_60 1280 x 800 59.810 49.
47 English SXGA_85 1152 x 864 84.990 77.094 SXGA_60 1280 x 1024 60.020 63.981 SXGA_72 72.000 76.970 SXGA_75 75.025 79.976 SXGA_85 85.024 91.146 QuadVGA_60 1280 x 960 60.000 60.000 QuadVGA_75 75.000 75.000 SXGA+_60 1400 x 1050 59.978 65.317 UXGA_60 1600 x 1200 60.
48 English 3 Component Signal 4 Video , S-Video Signal 1080p 60 67.5 1080P 50 56.26 1080p 24 27.00 1080p 23.98 26.97 Mode Resolution V.Frequenc y [Hz] H.Fr equency [KHz] 480i 720 x 480 59 .94 15.73 480p 720 x 480 59 .94 31.47 576i 720 x 576 50 .00 15.
49 English English Regulations and safety notices FCC notice This device has been tested and fo und to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
50 English Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Confor mity for EU countries Acer hereby, declares that this projector series is in complianc e with the essential requirements and other relevant provisions of Directive 1999/5/EC.
51 English English List of applicable countries This device must be used in strict accorda nce with the regulations and constrai nts in the country of use. For f urther information , please contact a local offi ce in the country of u se. Please see ht tp://ec.
52 English Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan Declaration of Conformity We , Acer Incorporated 8F , 88, Sec. 1, Hsin T ai W u Rd., Hsichih, T aipei Hsien 221, Ta iwan Contact Person: Mr. Easy Lai, e-mail:easy_lai @acer.
53 English English Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan The standards listed below ar e applied to the product if built with WLAN module or wir eless keyboar d and mouse. R&TTE Directive 1999/5/EC as attested by confor mity with the following harmonized standa rd: • Article 3.
54 English Acer America Corporation 333 W est San Carlos St., San Jose CA 95110, U. S. A. T el: 254-298-40 00 Fax: 254-298-4147 www .acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules.
An important point after buying a device Acer T111B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acer T111B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acer T111B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acer T111B you will learn all the available features of the product, as well as information on its operation. The information that you get Acer T111B will certainly help you make a decision on the purchase.
If you already are a holder of Acer T111B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acer T111B.
However, one of the most important roles played by the user manual is to help in solving problems with Acer T111B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acer T111B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
