Instruction/ maintenance manual of the product VP-2124D Valcom
Go to page of 2
Issue 5 1 947139 A VP - 624D VP - 1124 D VP - 2124D 24 VOLT DC POWER SUPPLY SPECIFICA T IONS Input: 100 - 24 0VAC, 50/60Hz IEC- 320 -C14 input receptacle Input Current (@ 115V, 60Hz , Rated Output Load): VP -624D: 0.24 A AC Apparent Pow er 27.6VA VP -1124D: 0.
2 947139 A TE CHNICAL A SS ISTA NCE W hen trouble is reported, verify that AC pow er is being supplied to the unit. To test the power supply , remove all output connections, and measure the output voltage with a m eter. If no voltage is measured, replace the unit.
An important point after buying a device Valcom VP-2124D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Valcom VP-2124D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Valcom VP-2124D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Valcom VP-2124D you will learn all the available features of the product, as well as information on its operation. The information that you get Valcom VP-2124D will certainly help you make a decision on the purchase.
If you already are a holder of Valcom VP-2124D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Valcom VP-2124D.
However, one of the most important roles played by the user manual is to help in solving problems with Valcom VP-2124D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Valcom VP-2124D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center