Instruction/ maintenance manual of the product DRVT 61 W Beko
Go to page of 24
Vented Time Dryer DRVT 61 W.
Read this manual prior to initial operation of the product! Dear Customer , We hope that your pr oduct, which has been manufactured in modern facilities and passed through a strict quality contr ol procedur e, will give you very good results.
3 EN 1 Y our Dryer 4 Overview ....................................... 4 2 Impor tant safety information 6 General safety ............................... 6 Intended use ................................. 7 Children’ s safety ..........................
4 EN 1- Rating label 2- Control Panel 3- Fluff filter 4- Adjustable Feet 5- Power Cord Overview 1 Y our Dryer 2 3 5 1 4.
5 EN EN 2 Height (adjustable) 85.0 cm Width 59.5 cm Depth 54 cm Capacity (max.) 6 kg Weight (net) 31 kg V oltage See rating label Rated power input Model code T ype label is located behind the loading door . T ec hnical Specif ications Specifications of this appliance may change without notice to improve the quality of the product.
6 EN 2 Impor t ant safety information T This section includes safety information that will help protection fr om risks of personal injuries or materialistic damages. Failure to follow these instructions shall cause any warranty and reliability commitment to become void.
7 EN in places where it will be exposed to outdoor conditions. • Do not tamper with the controls. • Do not perform any repair or part replacing pr ocedures on the pr oduct even if you know or have the ability to perform unless it is clearly suggested in the operating instructions or the published service manual.
8 EN Refer to the nearest Authorised Service Agent for installation of your product. C Preparation of location and electrical installation for the product is under customer’ s responsibility . B Installation and electrical connections must be carried out by a qualified personnel.
9 EN B The air ventilation hose should not be connected to the chimney of a stove or a replace. B Do not operate your machine at the same time with heaters such as a coal or gas stove. Airow may cause the chimney to are up. Airow may cause the chimney to ame up.
10 EN Make sure that you have an earthed power outlet socket rated at 13 amps (minimum). A t te n t i o n! If you use your dryer as built-in, the socket must be reachable after installation, or a separate switch (which can disconnect the two poles) must be used in the installation.
11 EN Things to be done for energy saving: • Make sure that you operate the product at its full capacity but pay attention to not exceeding it. • Spin your laundry at the highest speed possible when washing them. Thus, the drying time is shortened and energy consumption is decreased.
12 EN emit flammable or explosive vapor . • Do not dry items cleaned with industrial chemicals in the dryer . • Do not dry your unwashed laundry in the dryer .
13 EN 1 . Filter cleaning warning light W arning light tur ns on when the filter is full. 2. Programme f ollow-up indicator Use to follow-up the progr ess of the current pr ogramme. 3 . L o w t e m pe r a tu r e Use to dry in low temperatures. 4. On/Off button Use to turn on and off the machine.
14 EN Preparing the mac hine 1. Plug in your machine. 2. Place the laundry in the machine. 3. Press the “On / Off” button. C Pressing the “On / Off” button does not necessarily mean that the programme has started. Press “Start /Pause/ Cancel” button of the machine to start the programme.
15 EN Programme selection and consumption table For fabrics spun at higher spin speeds than shown in the table the drying times will be reduced. * : Energy Label standard pr ogramme (EN 61121:2005) All values given in the table have been fixed according to EN 61121:2005 Standar d.
16 EN Auxiliary function Low temperature This function allows for drying at lower temperatures and ther efore saves energy . W arning LED will light up when you select the function . C Y ou must use this function when you dry your synthetic or delicate laundry .
17 EN T o start a new programme after the programme is over or to interrupt the programme, the childpr oof lock should be deactivated. T o deactivate the childproof lock, press the same buttons for 3 sec. C One of the LEDs on the program follow-up indicator starts flashing when the child-proof lock is activated.
18 EN Preparation and star ting 1. Press the “On/Off” button. 2. Place the laundry in the machine. 3. Select the programme. 4. Close the loading door . 5. Press “Start/Pause/Cancel” button. Cancelling a programme A new programme can be selected and started after “Programme cancel” is activated in order to change the drying programme.
19 EN Fluff filter Lint and fibres r eleased from the laundry to the air during the drying cycle are collected in the “Fluff Filter”. C Such fibre and lint ar e generally formed during wearing and washing. C Always clean the filter after each Drying process.
20 EN 9 Solution suggestions f or problems Problem Cause Explanation / Suggestion Drying process takes too much time. The filter might have not been cleaned. * Meshes of the filter may be clogged. W ash with water . Laundry comes out wet at the end of drying.
21 EN 1. Unplug the dryer . 2. Open the door . 3. T urn the contact pin in the upper part of door by 90° in the anti-clockwise direction and r emove it. 4. Unscrew the 2 scr ews of each door hinge and remove the door . 5. Removing the door lock: Using a flat screwdriver r elease the snap-fitted door lock.
22 EN 1 1 Guarantee Y our new product is guaranteed against the cost of breakdown r epairs for twelve months from the date of the original purchase. What is cov ered? • Repairs necessary as a result of faulty materials, defective components or manufacturing defect.
23 EN 12 Ser vice Please keep your purchase r eceipt or other proof of pur chase in a safe place; you will need to have it should the product r equire attention under guarantee. Y ou should also complete the details below; it will help us assist you when requesting service.
24 EN.
An important point after buying a device Beko DRVT 61 W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beko DRVT 61 W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beko DRVT 61 W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beko DRVT 61 W you will learn all the available features of the product, as well as information on its operation. The information that you get Beko DRVT 61 W will certainly help you make a decision on the purchase.
If you already are a holder of Beko DRVT 61 W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beko DRVT 61 W.
However, one of the most important roles played by the user manual is to help in solving problems with Beko DRVT 61 W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beko DRVT 61 W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
