Instruction/ maintenance manual of the product T35 Univex
Go to page of 8
T3 5 Treadmill A SSEMBLY INSTRUCTIONS T3 5 Treadmill A SSEMBLY INSTRUCTIONS.
Congratulations... and welcome to the world of Life Fitness and the Life Fitness T3 5 treadmill. The following Parts Identification Listing and the step by step assembly procedures have been assembled to make the set-up of this treadmill as quick and easy as possible.
I MPORTANT S AFETY I NSTRUCTIONS ! ⇒ DO NOT position the rear of the treadmill within 6 feet ( 2 meter ) of the nearest obstruction. The sides of the treadmill should maintain a m inimum clearance of 8 inches ( 20 cm ) from the nearest treadmill or other obstruction.
T OOLS R EQUIRED FOR A SSEMBLY... 5/32” Hex Key Wrench (provided), 9/16” Co mbination Wrench, Phillips Screwdriver P ARTS D ESCRIPTION 1 USER LEFT UPRIGHT Qty: 1 7966701 2 USER RIGHT UPRIGHT Qty: .
5 10 4 6 7 7 5 2 1 3 5 4 9 8 13 8.
IMPORTANT! DO NOT DISCARD THE SHIP KIT LOCATED ON TOP OF THE DECK AND BELT. ALL NECESSARY COMPONENTS NEEDED TO COMPLETE THE INSTALLATION ARE LOCAT ED IN THE SHIP KIT AND BASE TRAY. 1. Remove the tape securing the MOTO R COVER (A) to the FRAME (B). Carefully lift and remove the MOTOR COVER.
5. Locate a BOTTOM HANDRAIL SPACER (#8). Slide the BOT TOM HANDRAIL SPACER onto the bottom of the USER RIGHT HANDRAIL (#4) with the flat side of the BOTTOM HANDRAIL SPACER facing the FRAME (B).
10. Locate the HANDRAIL CROSSBAR (#9). With the bend facing upward and pitched toward the DISPLAY CONSOLE, carefully place the HANDRAIL CROSSBAR between the user LEFT AND RIGHT HANDRAILS (#4) as shown and align the mounting holes. Insert one SHORT MOUNTING BOLT (#6) on either end of the HANDRAIL CROSSBAR and tighten using a 5/32” hex key wrench.
An important point after buying a device Univex T35 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Univex T35 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Univex T35 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Univex T35 you will learn all the available features of the product, as well as information on its operation. The information that you get Univex T35 will certainly help you make a decision on the purchase.
If you already are a holder of Univex T35, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Univex T35.
However, one of the most important roles played by the user manual is to help in solving problems with Univex T35. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Univex T35 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
