Instruction/ maintenance manual of the product CD-9000 Universal Security Instruments
Go to page of 7
O WNER'S MANU AL WHAT YOU SHOULD KNOW ABOUT CO Carbon monoxide (CO) is an insidious poison. It is a colorless, odorless, tasteless gas. It is a cumulative poison. Even low levels of CO have been shown to cause brain and other vital organ damage in unborn infants with no effect on the mother.
Activation of this device indicates the presence of carbon monoxide (CO) which can kill you. If alarm sounds: 1. Operate reset/silence button; 2. Call your emergency services, fire department or 911; 3. Immediately move to fresh air - outdoors or by an open door/window.
MOUNTING LOCATION This CO alarm can be mounted on the wall or ceiling. WALL LOCATION: Locate the top of the alarm not more than 6 feet from the floor. CEILING LOCATION: Alarm should be mounted as close as possible to the center of a hallway or room. If this is not possible, the edge of the alarm should be at least 4 inches from any wall.
DEVELOPING YOUR OWN CO SAFETY PLAN This CO alarm can quickly alert you to the presence of CO - it cannot prevent toxic CO emissions. Please note that there are hazards against which CO detection may not be effective, such as gas leaks or explosions. The ultimate responsibility for protection against toxic CO fumes rests solely on you.
INSTALLATION AND OPERATION INSTALLATION INSTRUCTIONS: CAUTION!! READ CAREFULLY. CAUTION: THIS UNIT IS SEALED. THE COVER IS NOT REMOVABLE ! A mounting plate is provided on the back of the alarm.
NORMAL OPERATION In normal operation, the alarm will flash the red LED indicator once every 30 seconds. ALARM CONDITION If the alarm senses unsafe levels of CO, the red LED indicator will light up and the alarm will sound. The alarm condition will be signified by a repetitive alarm sounding pattern of 4 short beeps followed by 5 seconds of silence.
288-3259-00A ©2005, UNIVERSAL SECURITY INSTRUMENTS, INC. Printed in China UNIVERSAL FIVE (5) YEAR LIMITED WARRANTY Universal Security Instruments, Inc. ("Universal") warrants your Universal product to be free from defects in material and workmanship for a period of five (5) years from the date of purchase.
An important point after buying a device Universal Security Instruments CD-9000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Universal Security Instruments CD-9000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Universal Security Instruments CD-9000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Universal Security Instruments CD-9000 you will learn all the available features of the product, as well as information on its operation. The information that you get Universal Security Instruments CD-9000 will certainly help you make a decision on the purchase.
If you already are a holder of Universal Security Instruments CD-9000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Universal Security Instruments CD-9000.
However, one of the most important roles played by the user manual is to help in solving problems with Universal Security Instruments CD-9000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Universal Security Instruments CD-9000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
