Instruction/ maintenance manual of the product ULT2830 Universal Metal Industries
Go to page of 6
Item No. 0AL00-UL-001 Revised 02/02/06 C opyright (C) 2006, Universal Metal Industries, Inc. Page 1 INST ALLA TION INSTRUCTIONS & USE & CARE GUIDE T rade-Wind ® Ultra Series Range Hoods 410 C.
Item No. 0AL00-UL-001 Revised 02/02/06 C opyright (C) 2006, Universal Metal Industries, Inc. Page 2 WARNING! TO REDUCE THE RISK OF FIRE , ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: 4.
Item No. 0AL00-UL-001 Revised 02/02/06 C opyright (C) 2006, Universal Metal Industries, Inc. Page 3 6. The ducting must be air tight. Use a mi nimum of 2 s heet metal screws at every duct joint. Then, seal the duct joints with high quality duct tape. 7.
Item No. 0AL00-UL-001 Revised 02/02/06 C opyright (C) 2006, Universal Metal Industries, Inc. Page 4 P ART 2 Electrical Connection WARNING! Ensure that the power supply is discon nected before procee ding. Verify that the power supply matches the ratings found on the appliance data label befo re proceeding.
Item No. 0AL00-UL-001 Revised 02/02/06 C opyright (C) 2006, Universal Metal Industries, Inc. Page 5 P ART 3 Determining Direction of V ent and Securing the Hood MOUNTING HOLES: Because the Trade-Wind ® Ultra Seri es rangehood was design ed for all applications, no mounting hole s have been pre-drilled.
Item No. 0AL00-UL-001 Revised 02/02/06 C opyright (C) 2006, Universal Metal Industries, Inc. Page 6 P ART 4 Use and Care OPERATING CONTROLS: Always activate the ventilator when using cooking ap pliances . Activate the ventilator a few minutes before starting to cook to establish an airflow pattern within the room.
An important point after buying a device Universal Metal Industries ULT2830 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Universal Metal Industries ULT2830 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Universal Metal Industries ULT2830 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Universal Metal Industries ULT2830 you will learn all the available features of the product, as well as information on its operation. The information that you get Universal Metal Industries ULT2830 will certainly help you make a decision on the purchase.
If you already are a holder of Universal Metal Industries ULT2830, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Universal Metal Industries ULT2830.
However, one of the most important roles played by the user manual is to help in solving problems with Universal Metal Industries ULT2830. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Universal Metal Industries ULT2830 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
