Instruction/ maintenance manual of the product CD-9795 Universal
Go to page of 11
MODEL CD-9795 SMOKE & CARBON MONOXIDE ALARM WITH SILENCE CONTROL READ ALL INSTRUCTIONS The smoke alarm uses an extremely small amount of a radioactive element in the ionization chamber . Do not tamper with radioactive sealed source or try to rep air the smoke alarm yourself.
IMPORTANT SAFETY INFORMATION About this Alarm This combination alarm has separate sensors to detect smoke and carbon monoxide (CO). The smoke alarm has priority over the CO alarm. The combination smoke/CO alarm is designed to be used in ordinary indoor locations of single-family households only.
WHAT YOU SHOULD DO IF THE SMOKE ALARM SOUNDS YOU MUST QUICKL Y DO THE FOLLOWING: If the smoke alarm sounds and you have not pushed the test button, it is a warning of a dangerous situation.
Page 4 INSTALLING THE COMBINATION SMOKE/CO ALARM FOR RESIDENTIAL USE LOCATION Before installing your combination smoke/CO alarm, it is important to choose the best locations in your home. Placement can affect how well the alarm performs and how well residents hear the alarm if it sounds.
Mobile Home Installation: For minimum protection, smoke alarms should be installed in compliance with H.U.D. Manufactured Home Construction Safety St andards, Title 24 CFR, Section 3280.208 and Section 3282. For additional protection, see Single Story Residence smoke alarm requirements/recommendations for Existing Homes and New Construction Homes.
THIS COMBINA TION SMOKE/CO ALARM WILL NOT WORK WITHOUT 120 V AC POWER AND A GOOD BA TTER Y PROPERL Y INST ALLED. THE ALARM SHOULD BE TESTED WHEN INST ALLED AND THEN TESTED WEEKL Y AFTER THA T . INST ALLA TION AND OPERA TION INST ALLA TION INSTRUCTIONS: CAUTION!! READ CAREFULL Y .
For units that are used as single alarms, do not connect the yellow wire to anything. Insulate this wire (tape it) in place to make certain the yellow wire cannot contact any metal parts. This alarm can share the interconnect wire of carbon monoxide, smoke and heat alarms.
Page 8 5. T o activate 9 volt battery and alarm, hold the QUICK DRA W pull-out battery drawer closed, pull and remove the PULL-T AB. Discard PULL-T AB. 6. See "T AMPER LOCKING PIN." 7. T urn on AC power and press the TEST/RESET button. Check the LED's for proper operation (see "TESTING YOUR ALARM").
NEVER use an open flame of any kind to test this unit. Y ou might accidentally damage or set fire to the unit or to your home. The built-in test switch accurately tests the unit's operation as required by Underwriters Laboratories Inc.
BACKUP BA TTERY REPLACEMENT Disconnect AC power before changing battery. Shock hazard exists if AC power is miswired. This alarm uses a 9 V olt Alkaline battery . The battery should last for at least one year under normal operating conditions. The alarm has a low battery indicator , an audible "beep.
288-3308-00D UNIVERSAL FIVE YEAR LIMITED WARRANTY UNIVERSAL SECURITY INSTRUMENTS, INC. ("UNIVERSAL") warrants your UNIVERSAL product to be free from defects in material and workmanship for a period of five (5) years from the date of purchase.
An important point after buying a device Universal CD-9795 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Universal CD-9795 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Universal CD-9795 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Universal CD-9795 you will learn all the available features of the product, as well as information on its operation. The information that you get Universal CD-9795 will certainly help you make a decision on the purchase.
If you already are a holder of Universal CD-9795, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Universal CD-9795.
However, one of the most important roles played by the user manual is to help in solving problems with Universal CD-9795. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Universal CD-9795 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
