Instruction/ maintenance manual of the product 1422L Universal
Go to page of 9
SMOKE & FIRE ALARM WITH SILENCE FEA TURE T able of Contents: Page # Smoke Alarm Limitations and Functions ................................. 2 Recommended Location of Alarms ......................................... 2 Avoid These Locat ions .......
Page 2 RECOMMENDED LOCA TION OF ALARMS • Locate the first smoke alarm in the immediate area of the bedrooms. T ry to protect the escape route as the bedrooms are usually farthest from an exit. If more than one sleeping area exists, locate additional smoke alarms in each sleeping area.
• Locate at least one smoke alarm on every floor level. • Locate a smoke alarm in any area where a smoker sleeps or where electrical appliances are operated in sleeping areas. • Smoke, heat and other combustion products rise to the ceiling and spread horizontally .
THIS SMOKE ALARM WILL NOT WORK WITHOUT A GOOD BA TTERY PROPERL Y INST ALLED. THE SMOKE ALARM SHOULD BE TESTED WHEN INST ALLED AND THEN TESTED WEEKL Y AFTER THA T .
Page 5 OPERA TION, TESTING & MAINTENANCE OPERA TION: The smoke alarm is operating once the battery power is connected by removing the PULL-T AB. When products of combustion are sensed, the alarm sounds a loud alarm which continues until the air is cleared.
NOTE: If the T est button is pressed and held during the Silence mode, the smoke alarm will be tested normally . Upon the release of the T est button, the Silence mode will be restarted. Before using the alarm Silence Feature, identify the source of smoke and be certain that safe conditions exist.
Page 7 FCC P ART 15 RADIO FREQUENCY DEVICES This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 8 THIS PRODUCT IS LISTED TO UL ST ANDARD FOR SAFETY , UL217 BY UNDERWRITERS LABORA T ORIES, INC. Blinks On once approx every 40-45 seconds DC Power is present.
* 288-3444-00 ©2010, UNIVERSAL SECURITY INSTRUMENTS, INC. Printed in China 1 1407 Cronhill Drive, Suite A Owings Mills, Maryland 21 1 17 USA Visit Us on the Web! ww w .UniversalSecurity .com THREE YEAR LIMITED WARRANTY MODELS 976, 1422L MODELS 976L, 1422L UNIVERSAL SECURITY INSTRUMENTS, INC.
An important point after buying a device Universal 1422L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Universal 1422L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Universal 1422L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Universal 1422L you will learn all the available features of the product, as well as information on its operation. The information that you get Universal 1422L will certainly help you make a decision on the purchase.
If you already are a holder of Universal 1422L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Universal 1422L.
However, one of the most important roles played by the user manual is to help in solving problems with Universal 1422L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Universal 1422L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
