Instruction/ maintenance manual of the product KCM-5611 United Digital Technologies
Go to page of 22
K CM -561 1 18 x Zoom H.264 2-Megapixel IP IR D/N PoE Outdoor Box Camera w it h Advanced WDR Hardware User ’ s Manual (DC 12V / PoE) V er . 2013/ 07 / 02.
w w w . a c t i. c o m KCM -561 1 Hard ware Manual 2 T able of Contents Precautions 3 Safety Instructions ........................................................................... 4 Introduction 6 Package Contents ...................................
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 3 Precautions Read these instructio ns Y o u should read all the safety and op erating instructions before usi ng this product. Heed all warnings Y o u must adhere to all the warnings on the product and in the instruct ion manual.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 4 Safety Instructions Don’t use the pow er supply with other vo ltages This device is lik ely to be d amaged or damage other equipm ents / personnel, if you use a power suppl y with different voltage than the one included with this device.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 5 extensive work by a qualified techn ician to restore the video prod uct to its normal operation. Safety Check Upon completion of any service or repa.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 6 In troduction Package Contents KCM-561 1 QIG T erminal Blocks for Power , DI/O and Serial Port Warranty Card.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 7 Physical Description 1) MicroSDHC Card Slot Insert your MicroSD HC card here for local r ecording on camera .
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 8 5) Serial Port This port connects to serial devices via RS-4 85 or RS- 422 protocols. Use the supplied ser i al port terminal block to connect the wires from the ca mera to the ser i al device. See Serial Port Con nection on page 15 f or connection details.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 9 • 1 T ransistor O utput s - For connecting externa l devices such as rela y s and LEDs . Connected devices can be activated by Output buttons on the Live V iew page or through video managem ent software .
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 10 Preparing for Installation Remove the back cover by unscrewing the four attach ments. How to Do the W aterproof Installation The following installati on procedure mak es the ca mera be wate r -resistant even f or the situations where the cam era can easily be floode d by pouring rain.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 11 3. Two pieces from the conduit gland set will be attached to flex conduit f irst. 4. The third piece goes through the back side cover of the cam era. 5. The fourth piece (l ocking nut) is used to lock the gland firm ly from the i nside of the back side cover.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 12 7. Connect the flex con duit to the back side cover of the cam era. 8. Tighten the dom ed sealing nut. 9. Plug the network cable into the camera’s RJ -45 connector before c losing the back side of the cam era.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 13 11. Finally, the b ox camera with properl y mounted flex conduit as well as with proper outdoor brack et would look like this.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 14 Basic Connections Follow the procedures b elow to connect the IP device to the respecti ve apparatuses. If you have a PoE(Pow er over Ethernet) supported switch or injector: 1) Connect your IP Box Cam e ra to the Switch / Injector by CA T 5 or CA T6 cables wit h RJ45 connector .
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 15 Serial Port Connection The zoom cam era can be connected to a Pan-Tilt (PT) Scanner (Pan-Tilt Head) using the serial port connector . This a ll ows the zoom camera to do pan and tilt usin g the Pelco - D protocol.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 16 For more inf or m ati on on connecting PT scanners, pleas e refer to the Kno wledge Base article: Pan and T ilt Scanner for ACT i Zoom Cameras (http://www .acti.com/support/Knowle dgeBase/outside/detail.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 17 Accessing Camera Configure the IP A ddress In order to be able to communicate with the camera from y our PC, bo th the cam er a an d the PC have to be within the same network segment.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 18 bar of the browser . If y ou work with our cam eras regularly , then there is even a better w ay to discover the cameras in the network – by using IP Utility .
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 19 Use the default I P address of the camera If there is no DHCP server i n the given network, the user m ay have to m anually assign the IP addresses to both the PC and the cam era to make sure they are in th e same network segment.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 20 Manually adjust the I P addresses of multipl e cameras If there are m ore than one camera to be use d in the sam e local area network and there is no DHCP s erver t o assign un ique I P addresses to each of them , all of the cam eras woul d then have the i nitial IP addres s of 192.
w w w .a c ti . c o m KCM -561 1 Hard ware Manual 21 A ccess the Camera Now that the camera and the PC both have their unique IP addresses and are under the same network segm ent, you can use M icrosoft Internet Explorer on the PC to access the camera.
w w w .a ct i. co m KCM -561 1 Hard ware Manual 22 Upon successf ul connection to the cam era, the user interface called Web Configurator would appear together with the login page. The HTTP port num ber was not added behind the IP address since the defau l t HTTP port of the cam era is 80, which can be omitted from the address for conveni ence.
An important point after buying a device United Digital Technologies KCM-5611 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought United Digital Technologies KCM-5611 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data United Digital Technologies KCM-5611 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, United Digital Technologies KCM-5611 you will learn all the available features of the product, as well as information on its operation. The information that you get United Digital Technologies KCM-5611 will certainly help you make a decision on the purchase.
If you already are a holder of United Digital Technologies KCM-5611, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime United Digital Technologies KCM-5611.
However, one of the most important roles played by the user manual is to help in solving problems with United Digital Technologies KCM-5611. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device United Digital Technologies KCM-5611 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
