Instruction/ maintenance manual of the product S5201 Acer
Go to page of 65
Acer Projector P5206/N216/PN-X14/S5201/T111/PS- X11/S5201B/T111E/PS-X11K/ S5301WB/T121E/PS-W11K Series User's Guide.
Copyright © 2010. Acer Incorporated. All Rights Reserved. Acer Projector P5206/N2 16/PN-X14/S5201/T111 /PS-X11/S5201B/T1 11E/PS-X11K/S5301WB/ T121E/ PS-W11K Series User's Guide Original Issue: 1.
iii Information for Your Safety and Comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instruct ions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning.
iv • To avoid damage of internal componen ts and to prevent battery leakage, do not place the product o n a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected sho rt current or damage rotor devices, lamp.
v Product servicing Do not attempt to service this product yourself, as opening o r removing covers may expose you to dangerous vo ltage points or other risks.
vi might cause fire or electric shock. In this case, unplug immediately and contact your dealer. • Do not keep using this product to break or drop it. In this case contact your dealer for inspection. • Do not face the projector lens to the sun. It can lead to fire.
vii Caution for Listening To protect your hearing, follow these instructions. • Increase the volume gradually until you can hear clearly and comfortably. • Do not increase the volume level af ter your ears have adjusted. • Do not listen to music at high volumes f or extended periods.
viii First Thing First Usage Notes Do : • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Information for Your Safety and Comfort iii First Thing First viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Contr.
Troubleshooting 34 LED & Alarm Definition Listing 38 Replacing th e Lamp 39 Ceiling Mount Install ation 40 Specification s 43 Compatibility Modes 46 Regulations and safety notices 50.
1 English Introduction Product Features This product is a single-chip D LP ® projector, including the followin g outstanding features: • DLP ® technology • P5206/N216/PN-X14/S5201/T111/PS-X11/S5.
2 English Package Overview This projector comes with all the i tems shown below. Check to make sure you have them all. Contact your dealer imm ediately if any thing is missing.
3 English Projector Overview Projector Outlook Front / upper side Rear side # Description # Description 1 Power key and Power indicator LED 5 Control pan el 2 Projection lens 6 Zoom ring 3 Elevator bu.
4 English Control Panel # Function Description 1 LAMP Lamp indicato r LED 2 POWER Power indicator LED 3 Power key Refer to the "Turning the Projector On/ Off" section. 4 Keystone Adjusts image distor tion caused by tilting projection (±40 degr ees).
5 English Remote Control Layout # Function Description 1 Infrared transmitter Sends signals to the projector. 2 POWER Refer to the "Turning the Projector On/Off" section. 3 FREEZE To pause the screen image. 4 RESYNC Automatically synchronizes the projector to the in put source.
6 English 11 Rewind Play/Pause Stop Fast-forward Rewinds/Plays/Pauses/Stops/Fast-forwards the playing media files. 12 VGA To change source to V GA. This connector supports analog RGB, YPbPr (480p/576p/72 0p/1080i/1080p), and YCbCr (480i/576i). 13 COMPONENT To change source to Component video.
7 English Getting Started Connecting the Projector • P5206/N216/PN-X14 / S5201/T111/PS-X11 Note: To ensure the projector works well with your comp uter, please make sure the timing of the display mode is compatible with the projector.
8 English • S5201B/T111E/PS-X11K/S5301WB/T121E/PS-W11K Note: To ensure the projector work s well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: "*" USB drive limitation, do not support p ower.
9 English Turning the Projector On/Off Turning On the Projector 1 Remove the len s cap. 2 Ensure that the power co rd and signal cable ar e securely connected. The Power LED will ligh t red. 3 Turn on the proje ctor by pressing (POWER) on the control p anel or remote control, and the Power indicator LED will turn blue.
10 English Turning Off the Projector 1 To turn the projector off, press the power button. This message appears: "Please press the power button again to complete the shutdown process.
11 English Adjusting the Projected Image Adjusting the Height of the Projected Image The projector is equipped with an elevator foo t for adjusting the image height. To raise the i mage: 1 Press the elevator button. 2 Raise the image to the desired hei ght angle, then release the button to lock the elevator foot into position.
12 English How to Optimize Image Size and Distance Consult the table below to find the optimal im age sizes achievable when the projector is positioned at a desired distance from the screen. • P5206/N216/PN-X14 If the projector is 3 m from the screen, goo d image quality is possible for im age sizes between 75" and 98".
13 English • S5201/T111/PS-X11/S5201B/T111E/PS-X11K If the projector is 2 m from the screen, good image quality is possible for image sizes around 161". Note: Remind as below figure, the space of 320 cm height is required when located at 2 m distance.
14 English • S5301WB/T121E/PS-W11K If the projector is 2 m from the screen, good image quality is possible for image sizes around 189". Note: Remind as below figure, the space of 281 cm height is required when located at 2 m distance.
15 English How to Get a Preferred Image Size by Adjusting Distance and Zoom The table below shows how to ach ieve a desired image size by adjustin g either the position or the zoom ring. • P5206/N216/PN-X14 To obtain an image size of 50" set the projector at a distance b etween 1.
16 English • S5201/T111/PS-X11/S5201B/T111E/PS-X11K To obtain an image size of 50" set the projector at a distance 0.6 m from the screen. Desired Image Size Distance (m) Top (cm) Diagonal (inch) < A > W (cm) x H (cm) Max zoom < B > Min zoom < C > From base to top of image < D > 30 61 x 46 0.
17 English • S5301WB/T121E/PS-W11K To obtain an image size of 50" set the projector at a distance 0.5 m from the screen. Desired Image Size Distance (m) Top (cm) Diagonal (inch) < A > W (cm) x H (cm) Max zoom < B > Min zoom < C > From base to top of image < D > 30 65 x 40 0.
18 English User Controls Installation Menu The installation menu provides an on screen display (OSD) for projector installation a nd ma inte nance. Use the OSD on ly when the message "No signal input" is disp layed on the screen. 1 Turn on the proje ctor by pressing (POWER) on the control p anel or remote control.
19 English Acer Empowering Technology Empowering Key Acer Empowering Key provides three Acer unique functions: "Acer eView Management", "Acer eTimer Management", "Acer eOpening Management" and "Acer ePower Management".
20 English Onscreen Display (OSD) Menus The projector has multil ingual Onscre en Display (OSD) men us that allo w you to make i mage adjustments an d change a vari ety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the control p anel or remote control.
21 English Color Display Mode There are many factory presets optimized for various types of images. • Bright: Fo r brightness optimiza tion. • Presentation: For meeting presentation with higher brightness . • Standard: For common envir onment. • Video: For pla ying video i n a bright en vironment.
22 English Note: "Saturation" and "Tint" fun ctions are not supported und er computer, or HDMI (PC) mode. Note: "HDMI Color Range" is onl y available when the input si gnal is HDMI. Degamma Effects the representation of dark scenery.
23 English Image Projection • Front-Desktop: The factory default setting. • Front-Ceiling: When you select this function , the projector inverts the image for ceiling-m ounted projection . • Rear-Desktop: When you select this function, the projector reverses the image so that you can project behind a translucent screen.
24 English Sharpness Adjusts the sharpness of the image. • Press to decrease the sharpness. • Press to increase the sharpness. H. Position (Horizontal Position) • Press to move the image left. • Press to move the image right. V. Position (Vertical Position) • Press to move the image down.
25 English Note: "H. Position", "V. Position", "Frequency" and " Tracking" functions are not supported under vi deo mode. Note: "Sharpness" function is not supported under com puter mode. Note: The 3D function is support ed by VGA source only.
26 English Startup Screen Use this function to select your desired startup screen. If you change the setting, it will take effect when you exit the OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use the memorized picture from the "Screen Capture" function.
27 English Closed Capti on Selects a pr eferred close d captioni ng mode from CC1, CC2, CC3, CC4, (CC1 displays cap tions in the primary language in your area). Select "Off" to tu rn off the captioning feature. This function is only available when a composite vide o or S- Video input signal is selected and its system format is NTSC.
28 English User Password • Press to set up or change "User Passwor d". • Use the numerical keys on the remote control to set the password and press "MENU" to confirm. • To delete the digits, Press . • Enter the password again when you see "Confirm Password" displayed.
29 English Reset Press after choosing "Yes" to return the display parameters on all menus to the factory default settings. LAN Setting (for P5206/ N216/PN -X14/ S5201/T111/PS- X11) To connect your projector to the network: 1 Take a RJ45 cable and conn ect one end to the LAN input jack of the projector and the oth er end to the RJ45 port.
30 English About LAN Setting (for P5206/N216/PN-X14/S5201 /T111/PS-X11) Note 1 : An overview of the re mote networ k operation page LAN (for S5201B/ T111E/PS-X11K/ S5301WB/ T121E/PS-W11K) • The default value is "Off". Choose "On" to ena ble the LAN connection.
31 English Note 2 : An overview of the Tools page Note 3: The Info page shows the projector infor mation and status. Management ECO Mode Choose "On" to dim the pro jector lamp, which will also lower the power consum ption, reduce noise, and extend the lamp life.
32 English Audio High Altitude Choose "On" to turn on th e High Altitude mod e. When this function is turned on, the projector fans operate at full speed continuously to co ol down the projector’s temperature.
33 English Timer Language Timer Location Sets the location of the timer on the screen. Timer Start (or Stop) Press to start or stop the timer. Timer Period (Minutes) Press to adjust the timer period. Timer Volume Select this function to ad just the notification volume when the timer function is enabled and time is up.
34 English Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the follo wing troubleshooting guide. If the problem pe rsists, please contact your local reseller or service center.
35 English 3 Partial, s crolling or incorrectly displayed image (For notebooks) • Press "RESYNC" on the contr ol panel or remote control. • For an incorrectly displaye d image: • Follow the steps for item 2 (above) to adjust the resolution of your computer.
36 English Problems with the Projector 8 Image is stretc hed when displaying a "widescreen" DVD title When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: • If you pl ay a 4: 3 forma t DVD t itle, pl ease cha nge the format to 4:3 with the proj ector OSD.
37 English OSD Messages # Condition Message Rem inder 1 Message Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. P lease also check the dust filters if they are installed.
38 English LED & Alarm Definition Listing LED Messages Message Power LED Lamp LED Temp LED Red Blue Red Red Standby (Power cord plugged in) V- - - - - - Power on -- V -- -- Lamp retry - - Quick fl.
39 English Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life itself. It will show you a warning message "Lamp is approach ing the end of its useful life in full powe r operation.
40 English Ceiling Mount Installation If you wish to install the projector using a ce iling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included.
41 English 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow fo r proper heat distribution.
42 English 5 Adjust the angle and po sitioning as necessary. Note: The appropriate type of screw and washer for each mo del is listed in the table below.
43 English Specifications The specifications below are subject to change without notice. For final specs, please refer to Acer's marketing documentation.
44 English Lamp type • P5206/N216/PN-X14: Philips 30 0 W user-replaceable UHP • S5201/T111/PS- X11/S5201B/T111E/PS-X11K/ S5301WB/ T121E/PS-W11K: Philips 230 W user-replaceable VI P Keystone correction +/-40 Degrees (Vert ical), Manual Digital zoom 2 X Audio 5 W x 2 Weight • P5206/N216/PN-X14: Approximate 3.
45 English *Design and specifications are subject to chan ge without notice. Standard package contents • AC power cord x 1 • VGA cable x 1 • Remote control x 1 • Battery x 2 (for the remote co.
46 English Compatibility Modes 1 VGA Analog - PC Signal Mode Resolution V.Frequency [Hz] H.Frequency [KH z] VGA_60 640 x 480 59.940 31.469 VGA_72 72.809 37.861 VGA_75 75.000 37.500 VGA_85 85.008 43.269 VGA_70 720 x 400 70.087 31.469 VGA_85 85.039 37.927 SVGA_56 800 x 600 56.
47 English • * (star sign): For S5301 WB/T121E/PS-W 11K only 2 DVI-D & HDMI (HDCP) Timing MAC19 1024 x 768@75Hz 75.020 60.241 MAC21 1152 x 870@75Hz 75.061 68.681 WXGA_60 1280 x 768 59.870 47.776 WXGA_75 74.893 60.289 WXGA_85 84.837 68.633 WXGA_60 1280 x 720 60.
48 English SXGA_70 1152 x 864 70.012 63.851 SXGA_75 75.000 67.500 SXGA_85 1152 x 864 84.990 77.094 SXGA_60 1280 x 1024 60.020 63.981 SXGA_72 72.000 76.970 SXGA_75 75.025 79.976 SXGA_85 85.024 91.146 QuadVGA_60 1280 x 960 60.000 60.000 QuadVGA_75 75.000 75.
49 English • * (star sign): For S5301 WB/T121E/PS-W 11K only 3 Component Signal 4 Video , S-Video Signal 720p_50 50 37.50 1080i_60 60 33.75 1080i_50 50 28.13 1080p 60 67.5 1080P 50 56.26 1080p 24 27.00 1080p 23.98 26.97 Mode Resolution V.Frequency [Hz] H.
50 English Regulations and safety notices FCC notice This device has been tested and fo und to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
51 English English Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.
52 English List of applicable countries This device must be used in strict accorda nce with the regulations and constrai nts in the country of use. For f urther information, p lease contact a local office i n the country of use. Please see ht tp://ec.
53 English English Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan Declaration of Conformity We , Acer Incorporated 8F , 88, Sec. 1, Hsin T ai W u Rd., Hsichih, T aip ei Hsien 221, T aiwan Contact Person: Mr. Easy Lai, e-mail:easy_lai @acer.
54 English Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan The standards listed below ar e applied to the product if built with WLAN module or wireless keyboar d and mouse . R&TTE Directive 1999/5/EC as attested by confor mity with the following harmonized standa rd: • Article 3.
55 English English Acer America Corporation 333 W est San Carlos St., San Jose CA 95110, U. S. A. T el: 254-298-40 00 Fax: 254-298-4147 www .acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules.
An important point after buying a device Acer S5201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acer S5201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acer S5201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acer S5201 you will learn all the available features of the product, as well as information on its operation. The information that you get Acer S5201 will certainly help you make a decision on the purchase.
If you already are a holder of Acer S5201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acer S5201.
However, one of the most important roles played by the user manual is to help in solving problems with Acer S5201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acer S5201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
