Instruction/ maintenance manual of the product UH044SX Uniden
Go to page of 28
UNIDEN Model uh044sx UHF CB Radio Operating Guide UH044SX MEM DUAL ENTER UHO44SX TX PWR CALL SCAN MENU.
UNIDEN Model uh044sx UHF CB Radio W ARNING! 1 The citizen band radio service is licenced in Australia by ACMA Radio-communications (Citizen Band Radio S tations) Class Licence and in New Zealand by MED General User Licence for Citizen Band Radio and operation is subject to conditions contained in those licenses.
UNIDEN Model uh044sx UHF CB Radio CONTENTS 2 Introduction Features ........................................................................................3 Controls & Indicators ....................................................................
UNIDEN Model uh044sx UHF CB Radio The uh044sx UHF CB radio is compact, rugged and fits easily in your hand. This hand held UHF radio will give you consistent, outst anding performance in virtually all conditions and situations.
UNIDEN Model uh044sx UHF CB Radio CONTROLS & INDICA TORS 4 TX PWR CALL SCAN MENU UHO44SX MEM DUAL ENTER SPKR/MIC.
UNIDEN Model uh044sx UHF CB Radio A. T ransmit J. Memory B. Room Monitor K. Priority C. Busy L. Squelch D. V oice Activation M. Dual W atch E. Key Lock N. Group Scan F . Battery Level Indicator O. Busy Channel Lockout G . DCS/CTCSS Indicator P . Scan H.
UNIDEN Model uh044sx UHF CB Radio INCLUDED IN YOUR UH044SX P ACK 6 If any of these items are missing from the box, contact your Uniden Dealer . Optional Accessories ! Earpiece/Microphone (EM-060) ! V .
UNIDEN Model uh044sx UHF CB Radio BA TTER Y INST ALLA TION Y our uh044sx pack includes 3 AA rechargeable NiMH batteries to power the uh044sx. Y ou must install and then charge the batteries for 14+ hrs before use. The uh044sx can also use 3 AA Alkaline batteries.
UNIDEN Model uh044sx UHF CB Radio 8 CHARGING BA TTERIES W arning Notice! Use only the supplied ADD-044SX power adaptor if rechargeable batteries will be used in the uh044sx. The Transmit is disabled during charging. ! T urn the uh044sx knob [ON/OFF VOLUME] off and connect the AC adaptor plug to the charge jack.
UNIDEN Model uh044sx UHF CB Radio 9 BA TTER Y LEVEL DISPLA Y The icon in the upper right hand corner of the screen indicates the uh044sx current battery voltage level at all times.
UNIDEN Model uh044sx UHF CB Radio LOW BA TTER Y ALERT The LCD on your radio shows a battery meter in the upper right corner . icon indicates a fully powered unit. As the batteries lose power , will flash. The LCD display will turn off af ter 30sec. An error tone will sound if any key is pressed.
UNIDEN Model uh044sx UHF CB Radio POWER ON/OFF T o turn the unit ON , rotate the [ON/OFF VOLUME] clockwise until a “click” is heard. A channel number and battery level should appear on the display . T o turn the unit OFF , rotate the [ON/OFF VOLUME] knob counter-clockwise until a “click” is heard.
UNIDEN Model uh044sx UHF CB Radio 12 OPERA TION SELECTING A CHANNEL Press or to select the desired channel. If you press and hold the or channel numbers will scroll rapidly . TO TRANSMIT AND RECEIVE The uh044sx uses the 40 UHF-CB Channels. For your reference a list of the available channels and corresponding frequencies is printed on page 25.
UNIDEN Model uh044sx UHF CB Radio 13 OPERA TION TO OPERA TE IN DUPLEX MODE (REPEA TERS) The Duplex function enables you to access local repeater stations. Y ou can only activate Duplex on CH01-CH08. UHF CB Repeaters are used to retransmit or relay your signal.
UNIDEN Model uh044sx UHF CB Radio TRANSMIT POWER SELECT The uh044sx has three transmit power levels: 2 W att, 0.5 W att and 0.1 W att. T o change your transmit power level: 1. Press while in the 'power middle level' to change to 'power high level.
UNIDEN Model uh044sx UHF CB Radio OPEN SCAN (OS) Mode (the absence of GS icon indicates that the unit is on OS mode) Allows continuous scanning of channels stored in the Open Scan (OS) memory . If an active channel is found, scanning will stop on that channel.
UNIDEN Model uh044sx UHF CB Radio OPERA TION 16 GROUP SCAN(GS) Mode T o change between OS and GS scan; 1. Press four times. GS setting ON or OFF will flash. 2. Press or to change the selection. 3. Press and hold to save and exit. T o initiate scanning, 1.
UNIDEN Model uh044sx UHF CB Radio OPERA TION Priority Channel The feature allows user to monitor one of the 40 channels, monitoring it every 1.5 secs during Group Scanning. The Priority Channel can also be monitored with Dual W atch, see page 18. Choosing a Priority Channel 1.
UNIDEN Model uh044sx UHF CB Radio OPERA TION Drop-out Delay While scanning, the uh044sx stops at a busy channel and receives a signal. When the received signal is over , the unit will wait for 3 seconds for the return of the signal, otherwise, the radio resumes scanning.
UNIDEN Model uh044sx UHF CB Radio CTCSS CTCSS is a feature that allows a group to talk to each other without hearing other users on the same channel. 1. Select desired channel. 2. Press two times. The current DCS/CTCSS setting flashes. 3. Press , to select desired CTCSS code.
UNIDEN Model uh044sx UHF CB Radio OPERA TION VOX VOX is the automatic transmitting function by inputting voice into the VOX headset mic without pressing the PTT key . While headset microphone is not connected, VOX function is inactive even if vox level setting is from 1 to 4.
UNIDEN Model uh044sx UHF CB Radio 21 Room Monitor can be temporarily disabled by pressing or .If no further operation is performed for 45 seconds then the temporary disable mode ends and Room Monitor mode re-activates. 1. Press six times. 2. Press , to select desired setting.
UNIDEN Model uh044sx UHF CB Radio BUSY CHANNEL LOCKOUT BCL is used when CTCSS or DCS is selected to prevent transmission when the uh044sx detects a transmission from another unit using the same CTCSS or DCS code. 1. Press nine times. The current BCL setting flashes.
UNIDEN Model uh044sx UHF CB Radio 23 OPERA TION KEYP AD LOCK T o prevent accidental entries, you can lock the keypad. Press and hold the button for 1.5 Secs until it beeps to activate Key Lock. icon appears. T o unlock the keypad, press and hold the button again for 1.
UNIDEN Model uh044sx UHF CB Radio 24 Please follow these guidelines for channel use in Australia: • Channels 05 and 35 are Emergency Channels. • Channel 1 1 is a Calling Channel. • Channels 22 and 23 are for telemetry and telecommand applications and TX is inhibited on these channels.
UNIDEN Model uh044sx UHF CB Radio 25 CTCSS & DCS CODE LIST.
UNIDEN Model uh044sx UHF CB Radio W ARRANTY 26 UNIDEN UH044SX UHF CB TRANSCEIVER RADIO Limited One Y ear Warranty Please keep your sales docket as it provides evidence of warranty .
UNIDEN Model uh044sx UHF CB Radio © 2007 Uniden Australia Pty Limited/Uniden New Zealand Limited Printed in China UTZZ01937ZA(0).
An important point after buying a device Uniden UH044SX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden UH044SX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden UH044SX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden UH044SX you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden UH044SX will certainly help you make a decision on the purchase.
If you already are a holder of Uniden UH044SX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden UH044SX.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden UH044SX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden UH044SX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
