Instruction/ maintenance manual of the product UH013 Uniden
Go to page of 19
OWNER’S MANUAL UNIDEN Model UH013 UHF CB Radio.
Introduction 2 Features 2 Preventive Maintenance 2 Troubleshooting 2 Controls / Connectors 3 Indicators 4 Included with your UH013 5 Mounting Options 6 Operation 8 Setting the Squelch 8 Monitor 8 Sele.
Preventive Maintenance: The following system checks should be made every six to twelve months: Check the Standing Wave Ratio (SWR). Inspect the tightness of all electrical connections. Inspect the antenna coaxial cable for wear or breaks on the shielding.
UNIDEN Model UH013 UHF CB Radio Controls / Connectors 3 UHF ANT . EXT .SP . DC 13.8V 6 4 5 9 10 1 1 12 1 2 3 8 15 13 14 Front Rear 7 Liquid Crystal Display (LCD) Rotary Channel Selector On/Off V olume.
UNIDEN Model UH013 UHF CB Radio Indicators 4 SCN - Scan SL T - Select SRC - Search HLD - Hold BCL - Busy Channel Lockout SQT - Squelch T ight M - Memory - Channel Number - CTCSS Code S/RF - RF Signal .
5 UH013 Owners Manual OWNER’S MANUAL UNIDEN Model UH0 13 UHF CB Radio Microphone Hanger , Screws and W ashers DC Power Cord with Fuse Display Mount Bracket Display Unit Microphone Consumer Support C.
UNIDEN Model UH013 UHF CB Radio Mounting Options Mounting the complete radio (T ransceiver with Display Unit) Remote mounting of the T ransceiver Unit 6 The radio can be mounted complete - or - with the Display Unit remote of the T ransceiver . a) Plug in display cable from the Display Unit to the transceiver .
Fixing the Display Rear Bracket T o mount the Display Unit it needs to be fitted with a Display Rear Bracket (included in package). a) Position the Display Rear Bracket so that one end fits over the two studs at the end of the Display Unit. b) Push it into place until the fixing screw hole is aligned with its threaded counterpart.
Turn the Unit ON by rotating the volume control clockwise. The UH013 has 2 Levels Preset Squelch. It requires no adjustment. However , if you are in a very high noise area it may break through. Press to select the tight squelch mode. The SQT icon appears.
The Signal coming from your radio is received by the Repeater Station and then retransmitted at the same time on another channel. This operation is called "Duplexing". For example, CH01 on Duplex Mode will Receive on CH 01 but T ransmit on CH31 CH02 on Duplex Mode will Receive on CH 02 but T ransmit on CH32 etc .
UNIDEN Model UH013 UHF CB Radio Operation Press and hold for 2 seconds to switch Duplex ON. The DUP icon appears. If Duplex is not required - press and hold for 2 seconds again to switch Duplex off. Only channels 01 - 08 are available for Duplex 10 NOTE Check with your local Retailer for information on available Repeaters.
T o deactivate SCAN, press the button or the PTT button. Press and hold for 2 seconds to turn off Group Scan Mode. UNIDEN Model UH013 UHF CB Radio Operation 1 1 If the Priority Channel becomes active the radio will stay on that channel for as long as the signal is present.
12 If the channel is already in use, you can prevent the UH013 from transmitting . This is particularly important when using CTCSS. Press 2 times. T urn the Rotary Channel Selector to display .
13 Turn the Rotary Channel Selector to the desired channel to use CTCSS. Press and hold for 2 seconds. CTCSS icon flashes. Turn the Rotary Channel Selector to select the desired CTCSS code 01 - 38. Press once to store the new setting. Rotary Channel Selector Channels 05 and 35 are Emergency Channels and channel 1 1 is a Calling Channel.
14 UNIDEN Model UH013 UHF CB Radio Operation Searching Searching checks every frequency within the Band. If an active channel is located the UH013 will stop on that channel until 2 seconds after the transmission ends, then continue. Search Hold 1. T o stop the search, press at any time.
15 Outline Selective Calling (SELCALL) is a special Sequential T one Squelch System that allows the user to receive/transmit calls selectively from/to an individual or group, on a shared busy channel. The UH013 has an Optional Selective Calling system .
UNIDEN Model UH013 UHF CB Radio Frequency & CTCSS T one Lists 16 NOTE: Channel 05 1 1 and 35 are not CTCSS programmable. CTCSS TONE List T one No. 01 02 03 04 05 06 07 08 09 10 1 1 12 13 14 15 16 17 18 19 20 21 22 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 23 OFF 67.
ONE YEAR LIMITED W ARRANTY IMPORT ANT : Evidence of the original purchase is required for warranty service. W ARRANTOR: Uniden New Zealand Limited. Uniden Australia Pty Ltd.
C 2002 Uniden Australia Pty Limited / Uniden New Zealand Limited Printed in the Philippines PPC: UTZZ01887ZZ.
An important point after buying a device Uniden UH013 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden UH013 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden UH013 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden UH013 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden UH013 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden UH013, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden UH013.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden UH013. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden UH013 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
