Instruction/ maintenance manual of the product PRO505XL Uniden
Go to page of 10
PRO505XL P rof essional Mobile CB R adio © 2013 Uniden America Corp. Printed in Vietnam Ir ving, T exas U01UT386ZZA(0).
2 Welcome to the world of Citizens Band radio communications. Y our Uniden radio is an advanced mobile radio designed for use in the Citizens Band (CB) Radio Service. It will operate on any of the 40 AM frequencies authorized by the Federal Communications Commission (FCC).
3 Communications Act and with the rules of CB Radio Service. (For more information on U.S. radio rules, visit the FCC website at www .fcc.gov .) Uniden contact information Y ou can get answers 24/7 at our website: www .
4 Front No. Name Details 1 CB/P A Switch Switches between CB Radio and P A systems 2 V olume/ Power Adjusts the volume. T urns radio on and off. 3 4-Pin Mic Plugs in microphone 4 CH9 Sets the radio to CH9 (Emergency). 5, 6 Channel Selectors Press or to select which channel the radio will transmit or receive on.
5 No. Name Details 11 12 V olt DC Power Cord Connects to DC power supply , page 5. Microphone Press and hold the PTT button to transmit on the selected channel. Release the button to listen for a response. NOTE: For the best sound quality , hold the microphone about 2 inches away from your mouth and speak in a normal voice.
6 ► Pick a location that does not block your view , interfere with your vehicle’s controls, or hinder your driving. ► Make sure the radio and microphone are not in front of an airbag. ► Pick a solid surface that can support the bracket and radio weight.
7 External monitor P A speaker Notes The internal speaker is disabled when an external speaker is connected. Y ou must have a P A speaker connected to use the P A feature. CAUTION: Make sure the SWR is less than 2:1 before using the radio. An SWR higher than 2:1 can damage the transmitter .
8 Using the Instant Channel 9 feature – Press the CH9 button; the radio automatically tunes to channel 9. – Press the CH9 button again to return to the previous channel. NOTE: Make sure you read and understood part 95 of the FCC rules and regulations before using the transmitter .
9 times. G eneral Channels 40 AM Frequency Range 26.965 to 27.405 MHz Frequency Control Phase Locked Loop (PLL) synthesizer Frequency T olerance ±0.005% Operating T emperature -30ºC to +50ºC Microphone Plug in type, electret Input V oltage 13.8 V DC nom.
W ARRANTOR: UNIDEN AMERICA CORPORA TION (“Uniden”) ELEMENTS OF W ARRANTY : Uniden warrants, for two years, to the original retail owner , this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below .
An important point after buying a device Uniden PRO505XL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden PRO505XL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden PRO505XL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden PRO505XL you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden PRO505XL will certainly help you make a decision on the purchase.
If you already are a holder of Uniden PRO505XL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden PRO505XL.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden PRO505XL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden PRO505XL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
