Instruction/ maintenance manual of the product LRD 737 Uniden
Go to page of 26
LRD 737 Operating Guide ® C:ManualsLRD737LRD737.vp Wed Sep 22 15:35:27 1999 Color profile: Disabled Composite Default screen.
Precautions Important: The LRD 737 was not designed to help you disobey the law. Safe drivers always obey the posted speed limit and legal driving methods at all times. Federal and Local Regulations The FCC passed the Communications Act in 1934 to give all citizens the right to receive any type of radio transmission.
Features, Specifications, and availability of Optional Accessories are all subject to change without notice. Uniden ® is a registered trademark of Uniden America Corporation. Contents Introduction ...............................................1 Feature Highlights .
One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one.
Covered under one or more of the following U.S. patents: 4,622,553 4,698,632 4,709,407 4,791,420 4,831,498 5,315,302 5,469,287 5,579,012 5,835,052 ©1999 Uniden America Corporation. All rights reserved. Printed in the Philippines ® USZZ01074ZZ C:ManualsLRD737LRD737.
Introduction Welcome to the world of sophisticated, early warning laser/radar detection. You have purchased one of the most advanced laser/radar detectors available.
Speed Detection Systems A speed detection device (often called a radar gun) sends out either a microwave signal or beam of light. When this signal reaches its target, part of the signal is reflected or bounced back toward the emitting gun.
Laser The Laser Speed Detection System, also called LIDAR (for Light D etection and Ranging), uses a laser gun that emits infrared light pulses just outside the spectrum of visible light. Each reflected pulse measures the speed of the object coming toward or going away from the laser gun.
Included with Your Radar Detector If any of these items are missing or damaged, contact your dealer immediately. Be sure to complete and mail the Product Registration Card. 4 Operating Guide Windshield Clip Printed Material Straight Power Cord Fuses and Spare Parts C:ManualsLRD737LRD737.
Controls and Functions 1. Clip Release — Press the clip release button to remove the LRD 737 from the windshield mounting clip. 2. Rear and front Laser Detector Lense — For rear and front detection of laser signals. 3. City Button — Press the city button to help reduce X-band false alarms while driving in the city.
6. DC 13.8V Power Input — Connect the DC power cord here. Note: Use only a Uniden® supplied power cord or its replacement. 7. LED Display — LEDs display visual alerts, signal strength, and operation mode. 8. On-Off/Volume Control — Turns the power on and adjusts the Audio Alert volume.
1. Radar Signal Indicator — A yellow LED under the R lights to indicate the presence of an X, K, or Ka-SuperWideband radar signal. The blink rate increases as the radar source gets closer. A distinct audio alert for each type of signal is also heard.
Installation The LRD 737 uses a highly sensitive horn-type antenna and IR laser sensor to receive radar/laser signals. Its sensitivity and range depend on the method of installation and the direction of the antenna/sensor in relation to the signal source.
Adjusting the Windshield Mounting Clip 1. The metal portion of the bracket locks into the plastic portion at three different positions. These positions can be used for vehicles with different vertical angles of their windshields. The back position can be used for vehicles with windshields that are slanted back.
Mounting to the Windshield To mount the LRD 737: 1. Press and hold the clip release button and insert the windshield clip into the LRD 737. Release the button at the appropriate position. 2. Place the bracket and the LRD 737 in the proper location on the windshield of your vehicle, and press the suction cups firmly against the windshield.
Connecting the Power The LRD 737 is designed to operate on most 13.8 VDC negative ground vehicle electrical systems. The power cord provided with the unit has a cigarette lighter socket plug at one end and a small connector at the other. 1. Insert the small connector into the jack on the side of the unit.
Replacing the Fuse The cigarette lighter plug contains a 1-ampere fuse to protect it from power surges. 1. To replace the fuse, unscrew the top of the plug. 2. Remove the fuse and replace it with the same type. 3. To replace the top, push in the two metal contacts and twist into place.
Operation You are now ready to enjoy the convenience and security of your LRD 737. Please read this section of the Operating Guide carefully to familiarize yourself with the basic operation of this unit. Power On Turn the volume control to switch on the power.
Memory Retention Feature The Memory Retention Feature retains the LRD737’s operational settings in memory for at least 2 days without power. When you turn on the LRD737, it will be in the same mode as when you turned it off.
Visual Alert Only Operation You can operate the LRD 737 in Visual Alert Only by setting the volume control at the minimum position in Full Alert Mode. At this setting you can barely hear the audio alert in a quiet environment. Be sure that the Audio Alert Only indicator is off.
City Operation In highly populated areas, you may encounter many devices that use the same frequencies as radar signals, such as motion detectors, automatic doors, and intrusion alarms.
LED Signal Strength Meter in City Mode The LED signal strength meter gives you instant information about the strength of the signal being detected. A weak signal causes the first LED to light, but as signal strength increases, more LEDs light. All three LEDs light when full signal strength is received.
Care and Maintenance The LRD 737 is designed to give you years of trouble-free service. There are no user-serviceable parts inside, and, except for the fuse, no maintenance is required. To keep your detector in new condition, follow these important suggestions: • Never leave the LRD 737 on the windshield when you park your vehicle.
Troubleshooting If your LRD 737 does not perform up to expectations, try the suggestions listed below. If you cannot get satisfactory results, call the Uniden Customer Service Center at (800) 297-1023, 7:00 a.m. to 7:00 p.m. Central Time, Monday through Friday.
Specifications General Dimensions: 3 in. (W) x 4 in. (D) x in. (H) Weight: 3.5 oz. Power Requirements: 13.8 VDC Temperature Range: Operating: -5°F to 160°F (-20°C to 70°C) Storage: -40°F to 185°.
Optional Accessories & Replacement Parts 21 Operating Guide Windshield Clip Straight Power Cord Fuses and Spare Parts Uniden Parts Department (800) 554-3988 Hours : M-F 8:30 AM to 5:00 PM CST.
An important point after buying a device Uniden LRD 737 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden LRD 737 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden LRD 737 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden LRD 737 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden LRD 737 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden LRD 737, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden LRD 737.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden LRD 737. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden LRD 737 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
