Instruction/ maintenance manual of the product HS-150B Uniden
Go to page of 8
OPERA TING INSTRUCTIONS SPEAKER SYSTEMS 1. SAFETY PRECAUTIONS ........................... 2 2. GENERAL DESCRIPTION ......................... 3 3. FEATURES ................................................. 3 4. DIMENSIONAL DIAGRAM .....................
2 1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or cautions regarding safety.
3 2. GENERAL DESCRIPTION TOA’s HS-120 series and HS-150 series speakers are 2-way speaker systems made of resin, and feature a large diameter woofer. They can be installed in many different applications with combined use of the supplied handles and the optional mounting brackets.
4 5. INPUT TERMINAL SECTION • As the Speakon connector is internally connected in parallel to the screw terminal as shown below, you can use either of the two. • The usable connector (on the cable end) that matches the NEUTRIK NL4MP Speakon is NEUTRIK NL4FX Speakon.
5 Mounting Bracket Mounting Bracket [Ceiling installation] [Wall installation] 7.1.2. HY-1200HB, HY-1200HW, HY-1500HB and HY-1500HW Mounting Brackets (For horizontal speaker mounting) • These brackets are designed to mount HS series speakers to ceilings or walls horizontally.
6 7.2. Mounting on the ST -33B Speaker Stand (optional) Note Refer to the instruction manual enclosed with the Speaker Stand for its mounting details. Step 1. Fix the bracket supplied with the speaker stand to the speaker. Step 2. Spread the tripod legs of the stand to their full extension.
7 7.3. Using as a Floor Monitor Notes • When installing the speaker system on slippery floor, put a non-slip mat under the speaker. • Do not kick or stand on the speaker system, as this will damage the speaker. The figure shows the HS-120 series. 7.
533-06-174-1B URL: http://www.toa.jp/ 9. SPECIFICA TIONS Traceability Information for Europe (EMC directive 2004/108/EC) Manufacturer: TOA Corporation 7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo.
An important point after buying a device Uniden HS-150B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden HS-150B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden HS-150B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden HS-150B you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden HS-150B will certainly help you make a decision on the purchase.
If you already are a holder of Uniden HS-150B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden HS-150B.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden HS-150B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden HS-150B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
