Instruction/ maintenance manual of the product DECT1905 Uniden
Go to page of 11
Ver. 1, Mar 05 U SER G UIDE THIS EQUIPMENT IS NOT DESIGNED FOR MAKING EMERGENCY TELEPHONE CALLS WHEN THE POWER FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO DIAL EMERGENCY SERVICES. Before operating this set, please read these instructions carefully.
Important note — emergency calls The DECT 1905 must be registered to a base series designed for making emergency calls when the mains power fails. So you should make alternative arrangements for access to Emergency Services.
Read these notes first Choosing a site for the charger pod The charger pod(s) should be placed on a level surface, in a position where: ■ the mains adapter plug will reach an easily accessible 240-V.
4 Fit the rechargeable batteries in each handset 3 A + – . Fit the two batteries as shown, making sure you match the and ends to the markings in the battery compartment B .
Installation and set-up 5 4 Charge the batteries for 15 hours The battery charge level symbol should increase by one bar every half hour when you’re charging an empty battery . If you think that the symbol isn’t showing the correct battery charge level, remove and refit the batteries.
Before you start Electrical safety ■ DON’T let the base unit or charger pod get wet. Electrical equipment can cause serious injur y if used while you are wet or standing in water .
Handset registration ! You must register the DECT 1905 handset to a compatible base (DECT 1915 or DECT1955 series base) before use. To check whether a handset is already r egistered, make sure mains power to the base unit is switched on and the handset is within range .
7 Press the right Soft button [ OK ] u The display may flash Register for a few moments, while the handset searches for a base unit. It then shows a list of handset numbers for the base unit. 8 Key in a free handset number (optional) and press the right Soft button [ OK ] (If you don’t key in a number, the base will select one automatically.
T o select a base unit If your handset is registered to more than one base unit, it will automatically select the one with which it can best set up a radio link (usually the nearest one). Or you can select a base unit manually . You don’t need this function if you have only one base unit .
T o register to a different brand of base unit Your DECT 19 05 handset(s) can be registered to any GAP-compatible base unit . But we do not guarantee that all features or display messages will be available using other manufacturers’ equipment .
11 Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited. ABN 58001 865 498 Uniden warrants to the original retail owner for the duration o.
An important point after buying a device Uniden DECT1905 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden DECT1905 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden DECT1905 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden DECT1905 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden DECT1905 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden DECT1905, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden DECT1905.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden DECT1905. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden DECT1905 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
