Instruction/ maintenance manual of the product D 9432 NM Beko
Go to page of 13
D 9430 NM D 9432 NM D 9433 NM Instructions for use en D 9470 NM.
Safety first ...................................................... /1 Electrical requirements .................................. /2 T ransportation instructions ............................. /2 Installation instructions...............................
Fig.1 1 4 5 5 5 6 8 10 1 1 7 9 2 3 12 14 14 14 14 13 12 15 16.
Fig.3 Fig.2 Fig.4 Fig.5 Fig.6 Fig.7.
Fig.8 Fig.10 Fig.9 Fig.12 Fig.1 1.
Instruction Manual GB 1 Safety first! Do not connect your appliance to the electricity supply until all packing and transit protectors have been removed. • Leave to stand for at least 4 hours before switching on, to allow compressor oil to settle, if transported horizontally .
Instruction Manual GB 2 Electrical requirements Before inserting the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply . • T ake care to ensure that the plug remains readily accessible.
Instruction Manual GB 3 portionsaccording to the daily or meal needs. •Even if food will be stored for a short period,foodshould be wrapped so that will not leak air to prevent driying. Packing materials should be resistant to cold, being torn, moisture,odor ,oil and acid.
Instruction Manual GB 4 T emperature control and adjustment •Internal temperature changes of the refrigerator which consists freezer compartment and refrigeration compartment can be adjusted by the thermostat adjustment knob on the illuminated panel.
Instruction Manual GB 5 Storing frozen food Y our freezer is suitable for the long-term storage of commercially frozen foods and also can be used to freeze and store fresh food. If there is a power failure, do not open the door . Frozen food should not be af fected if the failure lasts for less than 7 hrs.
Instruction Manual GB 6 Replacing the interior light bulb W arning! Light bulb must be changed by on authorized service personnel. Should the light fail, switch off at the socket outlet and pull out the mains plug. Then ensure the bulb is screwed securely in the bulb holder .
Instruction Manual GB Do’ s and don’ts Store bananas in your fridge compartment. Cover the shelves with any protective materials which may obstruct air circulation. Store poisonous or any dangerous substances in your appliance. It has been designed for the storage of edible foodstuffs only .
Instruction Manual GB T rouble - shooting If the appliance does not operate when switched on, check; • That the plug is inserted properly in the socket and that the power supply is on.
An important point after buying a device Beko D 9432 NM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beko D 9432 NM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beko D 9432 NM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beko D 9432 NM you will learn all the available features of the product, as well as information on its operation. The information that you get Beko D 9432 NM will certainly help you make a decision on the purchase.
If you already are a holder of Beko D 9432 NM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beko D 9432 NM.
However, one of the most important roles played by the user manual is to help in solving problems with Beko D 9432 NM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beko D 9432 NM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
