Instruction/ maintenance manual of the product GEP-32005T UNICOM
Go to page of 12
908 Canada Court City of Industry , C A 91748 U.S.A. Phone: 626.964.7873 or 800.346.6668 F ax: 626.964.7880 www .unicomlink.com e-mail: info@unicomlink.com ©UNICOM 2005. UNICOM and “A Network Systems Solution” ar e trademarks of UNICOM Electric, Inc.
Content 1. Introduction .............................................................. 1 2.Hardware Description............................................... 3 3. Installation ................................................................ 6 4. Network Application .
.
1 1. Introduction Gigabit Ethernet over copper technology is a proven cost-effective way for network equipment to be upgraded from Fast Ethernet to Gigabit speeds. The need of expensive fiber optic cabling for Gigabit speeds is eliminated by using standard 4-pair Category 5e copper cabling.
2 N-Way Auto-Negotiation Back pressure half duplex Flow control full duplex True non-blocking switching Store-and-Forward architecture support Package Contents 5 or 8 Port Desk.
3 2.Hardware Description This Section describes the hardware of the MicroGST/5 and 8 switches. The physical dimensions of each switch are 165 x 100 x 32.
4 Figure 2-2. The Rear Panel of the MicroGST/5 and 8 switches LED Indicators The LED Indicators gives real-time monitoring of system operating status. There are three LED indicators (100/1000, LNK/ACT, FDX/COL) for each Gigabit port and one Power LED for the unit.
5 LED Status Description Green Power On Power Off Power is not connected Green Port is operating at 1000Mbps speed. Orange Port is operating at 100Mbps speed. 100/1000 Off No device attached or in 10Mbps mode Green Port is connecting with the device. Blinking Port is receiving or transmitting data.
6 3. Installation Set the Switch on a sufficiently large flat space with a power outlet nearby. The surface should be clean, smooth, level, and sturdy. Ensure there is enough clearance around the Switch to allow air circulation and the attachment of the power cord and cables.
7 4. Network Application This section provides a sample of network topology in which the MicroGST/5 and 8 switches are used. In general, the MicroGST switches are designed as high-bandwidth backbone switches.
8 5. Technical Specification The following table provides the technical specifications of the MicroGST/5 and 8 switches. Standard IEEE 802.3 10Base-T Ethernet, IEEE 802.
9 LED Per port: 100/1000, Link/Activity, Full duplex/ Collision Per unit: Power Power Supply External power DC 12V/1.3A Power Consumption 5 port: 7.5 Watt (maximum) 8 port: 13.2Watt(maximum) Operation Temperature 0˚ to 45˚ C (32˚ to 113˚F) Operation Humidity 10% to 90% (Non-condensing) Dimension 165 x 100 x 32.
An important point after buying a device UNICOM GEP-32005T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought UNICOM GEP-32005T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data UNICOM GEP-32005T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, UNICOM GEP-32005T you will learn all the available features of the product, as well as information on its operation. The information that you get UNICOM GEP-32005T will certainly help you make a decision on the purchase.
If you already are a holder of UNICOM GEP-32005T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime UNICOM GEP-32005T.
However, one of the most important roles played by the user manual is to help in solving problems with UNICOM GEP-32005T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device UNICOM GEP-32005T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
