Instruction/ maintenance manual of the product D 8300 SM Beko
Go to page of 14
Instruction Manual en D 8300 SM D 8340 SM D 8410 SM D1 8410 SM D 8459 SM.
en-Index 1-10 Safety first ................................................./1 T ransport instructions ................................/2 Disposal ..................................................../2 Device Setup ....................................
D 8459 SM D 8340 SM 12 15 D 8300 SM D 8410 SM 12 15 1 2 3 5 5 7 9 11 4 5 A B 16 14 13 8 10 6 1 2 3 5 5 7 9 11 4 5 A B 16 14 13 16 8 10 1 2 3 5 5 7 9 11 4 5 A B 8 10 16 16 14 13 15 13 13 5.
2 5 3 4 7- d 7- c 6 7-a 7- b 3.
en en 1 Congratulations on your choice of our product which will certainly provide you with many years of good service. Safety comes first! Please read the operating manual carefully .
en en T ransport instructions The device should be transported only in upright position. The packing as supplied must be intact during transportation. After a transport in the horizontal position, the device may only be taken into operation 4 hours after being stood up vertically again.
en en 3 Get to know your device W arning Below information about accessories are supplied just for reference. Below accessories may not be exactly same as the accessories of your appliance. How to use the accessories Crisper separators (Fig. 7-a) The separators inside the crisper are designed to protect fruits and vegetables against bruising.
en en 1 = Lowest cooling setting (W armest setting) 5 = Highest cooling setting (Coldest setting) (Or) Min. = Lowest cooling setting (W armest setting) Max. = Highest cooling setting (Coldest setting) The average temperature inside the fridge should be around +5°C.
en en Cooling Food storage The fridge compartment is for the short-term storage of fresh food and drinks. Store milk products in the intended compartment in the refrigerator . Bottles can be stored in the bottle holder or in the bottle shelf of the door .
en en Making ice cubes Fill the ice-cube tray 3/4 full with water and place it in the freezer . As soon as the water has turned into ice, you can take out the ice cubes.
en en Replacing the interior light bulb (Fig. 3) Should the light fail to work, proceed as follows. 1- Switch off at the socket outlet and pull out the mains plug. Y ou may find it useful to remove shelves for easy access. 2- Use a flat tipped screwdriver to remove the light diffuser cover .
en en Practical tips and notes Cooling • Clean fresh food and vegetables before storing in the crisper bin. • Always pack or wrap food, or put it in a suitable container , before storing it in the appliance. • Wrap food which is not suitable for storage at cold temperatures in polyethylene bags (pineapple, melons, cucumbers, tomatoes etc.
en en Examples of Use White wine, beer and mineral water Bananas Fish or offal Cheese Melons Raw meat and poultry chill before use do not store in a fridge store in polyethylene bags only use airtight containers or polyethylene bags; for best results, take out from the fridge an hour before consumption.
en en What, if.... 1- The device will not work, even though it is switched on. • Check if the mains plug is properly connected! • Check if the mains supply is in order , or if a fuse has been tripped! • Check the temperature control for correct setting! 2- There is a power failure.
An important point after buying a device Beko D 8300 SM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beko D 8300 SM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beko D 8300 SM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beko D 8300 SM you will learn all the available features of the product, as well as information on its operation. The information that you get Beko D 8300 SM will certainly help you make a decision on the purchase.
If you already are a holder of Beko D 8300 SM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beko D 8300 SM.
However, one of the most important roles played by the user manual is to help in solving problems with Beko D 8300 SM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beko D 8300 SM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
