Instruction/ maintenance manual of the product PFI Ultratec
Go to page of 16
Power F ogger Industrial Line and PFI w/ LSG Operator’ s Manual www .ultratecfx.com VER. 30.10.10.
T able of Contents Introduction ................................................................................ 3 Micropr ocessor Control ............................................................ 3 W ater Base Fog T echnology .....................
www .ultratecfx.com 3 Intr oduction The Power Fogger Industrial is a Micropr ocessor Controlled, W ater Based Fog generating system. Micr oprocessor Contr ol The PFI features dual micr oprocessor control. Fr om temperature r egulation to taper back ow control, all of the functions are monitor ed and processed by the two on-board pr ocessors.
www .ultratecfx.com 4 PFI T echnical Specications Model: PFI/PFI-9D Part Number: PFI CLF 4450 / 120 volt CLF 4451 / 220-240 volt PFI-9D CLF 4460 / 110 volt CLF 4461 / 220-240 volt Power Rating: 120 V olt A.C. 50/60 Hz. 13 Amps. 240 V olt A.C. 50/60 Hz.
www .ultratecfx.com 5 Power Fogger Industrial 9D.
www .ultratecfx.com 6 LSG PFI System in a Roadcase 39.5 28.75 34.5 23.25 29.6 24 20 36 32.2 22 28.02 LSG w/ PFI T echnical Drawings LSG PFI System on a Cart.
www .ultratecfx.com 7 Operating Pr ocedure 1. The fog machine must be connected to a grounded supply of at least 15 amps fr ee of any interference. 2. Open a 20 Litre (5 Gallon) container of Ultratec Special Ef fects fog uid and insert the uid pickup tube into the spout of the uid container .
www .ultratecfx.com 8 Operation Pr ocedure LSG MK II High Pr essure w/ 20 & 50lbs Cylinders The Operation Procedur es outlined in this section, refer to Figure A and Figur e B on Page 9 and 10 . 1. Place the fog machine’ s output nozzle rmly against the center of the foam ring, sealing it to the input port of the LSG MK II.
www .ultratecfx.com 9 9. V erify cool temperature output by using your hand and passing it thr ough the fog-CO2 output noting the temperature. 10. After use, tur n off the valves and trigger the LSG MK II to depr essurize the system before attempting to disconnect hoses.
www .ultratecfx.com 10 Figur e B Liquid Carbon Dioxide LSG Control Signal Installation Model Shown Above T ouring Model Available High Pressure Bottles w/ Liquid Siphon Tube Liquid Carbon Dioxide Liqu.
www .ultratecfx.com 11 Operation Pr ocedure LSG MK II Low Pr essure w/ 350lbs Dewar T ank The Operation Procedur es outlined in this section, refer to Figure C on Page 12. 1. Place the fog machine’ s output nozzle rmly against the center of the foam ring sealing it to the input port of the LSG MK II.
www .ultratecfx.com 12 10. V erify cool temperature output by using your hand and passing it through the fog-CO2 output noting the temperature. 11. After use, tur n off the valves and trigger the LSG MK II to depr essurize the system before attempting to disconnect the hoses.
www .ultratecfx.com 13 Options Remotes - The Show Control Remote and Timer/ Duration Remote are compatible with the Power Fog Industrial, Power Fog Industrial w/ Air Option, Power Fog Industrial 9D and Power Fog Industrial 9D w/ Air Option. Each remote is sold separately .
www .ultratecfx.com 14 Closed “Dry” Contact Show Control Show Contr ol Operation Show control is achieved by connecting a “Dry” or zer o voltage contact to the show control terminals. The Power Fog Industrial r equires no power to signal the fog, only one set of contacts that close for the entire fogging cue.
www .ultratecfx.com 15 DMX Operation The Power Fog Industrial is equipped with DMX controls as a standar d feature. 1. Attach a DMX signal to the DMX IN 5 pin connector on the rear of the unit. A terminator may be r equired on the DMX OUT connector in some applications.
www .ultratecfx.com 16 Contact Information Head Ofce Ultratec Special Effects Inc. 1960 Blue Heron Drive London, Ontario N6H 5L9 Direct: 519-659-7972 T oll Free: 866-534-5557 Fax: 519-659-7713 Canadian Shipping Address (For All Canadian Repairs) Ultratec Special Effects Inc.
An important point after buying a device Ultratec PFI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ultratec PFI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ultratec PFI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ultratec PFI you will learn all the available features of the product, as well as information on its operation. The information that you get Ultratec PFI will certainly help you make a decision on the purchase.
If you already are a holder of Ultratec PFI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ultratec PFI.
However, one of the most important roles played by the user manual is to help in solving problems with Ultratec PFI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ultratec PFI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
