Instruction/ maintenance manual of the product DMS-100 Ultratec
Go to page of 20
DMS-100 Owner's Manual.
DMS-100 Owner ’ s Manual ©2010 Universal Remote Control, Inc. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC.
Congratulations! 2 Features and Benefits 3 Parts Guide 3 Front Panel Description 4 System Features 5 Rear Panel Description 6 USA Limited W arranty Statement 10 Specifications 12 System Configuration .
Page 2 DMS-100 S INGLE Z ONE A MPLIFIER Congratulations! Y ou’ve purchased the finest music distribution system available today . The DMS-100 is a native to the network, CD quality digital music dis.
Page 3 DMS-100 S INGLE Z ONE A MPLIFIER Features and Benefits • One audio input streams to other T otal Control amplifiers. • Preamp output for connection to local amplifier . • Scalable solution; install as an additional zone with a DMS-1200 system, or install multiple DMS-100s to create customized multi-zone system.
Page 4 DMS-100 S INGLE Z ONE A MPLIFIER Front Panel Description Power and LAN LEDs LEDs indicate that the DMS-100 is connected to power and to the local area network. Automatic Power Off The DMS-100 is powered off and is in an automatic stand by state when no zones are active.
Page 5 DMS-100 S INGLE Z ONE A MPLIFIER System Features Pristine Audio Quality Unlike other digital music systems, the DMS system streams all music uncompressed at pure CD quality levels. Y ou enjoy all the detail of your original source. Room Linking Any room can be linked with any other room to listen to the same source.
Page 6 DMS-100 S INGLE Z ONE A MPLIFIER Rear Panel Description 1 10V -220V Power Connection The IEC power socket enables either UL/CSA approved 1 10V power cords or CE approved 220V power cables to be used with the DMS-100. The internal power supply automatically switches from 1 10V to 240V .
Page 7 DMS-100 S INGLE Z ONE A MPLIFIER System Features Analog Audio Input Connect a music source to the DMS-100 to listen locally to an A V receiver . Preamp Zone The preamp zone enables use of external power amplifiers for a room with a need for more or less power than 50 watts per channel.
Page 8 Important Safety Instructions This unit shall be connected to a mains socket outlet with a protective grounded connection or equivalent. CAUTION: T o completely disconnect this product from the mains, disconnect the plug from the wall socket outlet.
Page 9 I MPORT ANT S AFETY INSTRUCTIONS Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. In the event of malfunction, un plug lmmediately . 6. Do not use this apparatus near water .
Page 10 USA W ARRANTY USA Limited W arranty Statement Y our Universal Remote Control, when delivered to you in new con- dition, is warranted against defects in materials or workmanship as follows: UNIVERSAL REMOTE CONTROL, INC. warrants this prod- uct against defects in material or workmanship for a period of one (1) year and as set forth below .
Page 1 1 USA W ARRANTY LIMIT A TION OF REMEDIES UNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANY INCIDENT AL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED W ARRANTY OR CONDITION ON THIS PRODUCT .
Page 12 S PECIFICA TIONS Specifications Network One 10/100 Ethernet port (Indicator T wo LED) IR One W ay & IP T wo W ay Ye s Control: Indicators: One Power Blue LED - Blink when resetting/One Net.
Page 13 DMS-100 S YSTEM C ONFIGURA TION System Configuration for Internal LAN Network Follow the steps below to connect a DMS-100 to a LAN network. 1. Connect the Internet to the coaxial CABLE port in the rear of the cable modem. 2. Plug in a RJ-45 ethernet connector cable via the Ethernet port of the cable modem to the W AN port of the Router .
Page 15 E UROPE C ERTIFICA TE O F C ONFORMITY Europe Certificate Of Conformity Universal Remote Control, Inc. declares that this product complies with the requirements CE/L VD (Low V oltage Directive, 2006/95/EC).
Page 16 N OTE.
Page 17 N OTE.
Page 16.
OCE-0099C Rev 01.
An important point after buying a device Ultratec DMS-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ultratec DMS-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ultratec DMS-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ultratec DMS-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Ultratec DMS-100 will certainly help you make a decision on the purchase.
If you already are a holder of Ultratec DMS-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ultratec DMS-100.
However, one of the most important roles played by the user manual is to help in solving problems with Ultratec DMS-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ultratec DMS-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
