Instruction/ maintenance manual of the product 600 Series Ultra Start
Go to page of 12
WWW .UL TRAST ARTERS.COM FCC/ID Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
T able of Content s Page 2 Component s 600 Wiring Diagram Page 3 Inst allation Tip s Page 4 Pre-Installation Suggestions Inst allation Suggestions Page 4 Mounting The Module Installing The LED Install.
Green Green Green Red Red Blue Blue Blue Black Pink Pink Door Lock Output Door Unlock Output 12vt s Low Current Priority Output (-)500ma Output (-)500ma Output (-)500ma Output (+)500ma Output Programm.
R ecommended Installation Procedure s Mounting the Module Installing Th e Led Installing Th e Prog ra m Button Connecting Th e Star ter Disable BEFORE ST ARTING INST ALLA TION : - Discuss the optional system features with the customer . - T ake a few minutes to review the installation and owners manuals.
Pink Channel 4 Output Programmable - See menu 2, setting 5. Green (-) Door Input Negative door pin switch input. Blue (-) Hood Input Negative input from hood pin switch. Purple (+) Door Input Positive door pin switch input. Brown (+) Siren Output Positive output for siren.
14 Pin P ower Connector Step 2- Plug-In Th e Module Step 3- Prog ra m, T est And Adjust Th e Shock Sensor T est Th e System When all the connections are done, the control module can be plugged in. Before connecting the control module, make sure the ignition is in the OFF position.
Program mode allows you to adjust the settings and options of your system. Y our system has been intelligently designed by installers with years of experience.
Setting 1- Ignition Auto Lock Menu 1 - User Settings Setting 2- Hor n Honk Settings Setting 3- Door Lock Options Setting 4 -Sensor - Enable / Disable Setting 5 - Passive / Active Ar ming Setting 6 - Active / Passive Locks 1 Double Pulse Unlock 1 Flash Single .
Setting 1 - Car Finder/ 5th Channel Menu 2- Alar m Settings Setting 2 - Secure V alet Mode Setting 3 - Park Light Output Setting 4 - Hor n Honk Timing Setting 5 - 4th Channel Settings Setting 6 - Car .
Press Once to Lock the doors and arm the alarm. Hold for Panic Mode. Press a second time and hold for Constant Lock Output. Press Once to Lock and arm the alarm.
When the Car Jack Mode is activated the system will start flashing the LED rapidly for five seconds. The park lights a nd siren will then activate once every second for 10 seconds in Countdown Mode.
If the alarm system is triggered while armed, the system will ret ain in memory the cause of the trigger . The diagnostics can then be used to determine what the cause of the trigger was. When disarming the alarm, the siren/horn will chirp 3 times instead of the usual 2 times to indicate the alarm had been triggered.
An important point after buying a device Ultra Start 600 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ultra Start 600 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ultra Start 600 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ultra Start 600 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Ultra Start 600 Series will certainly help you make a decision on the purchase.
If you already are a holder of Ultra Start 600 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ultra Start 600 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Ultra Start 600 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ultra Start 600 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
