Instruction/ maintenance manual of the product 600 Ultra Start
Go to page of 12
WWW .UL TRAST ARTERS.COM 600 INST ALLA TION GUIDE Advanced V ehic le Security System TECH SUPPORT Western Canada And The United States: 1 (866) 698-5872 Eastern Canada. Bilingual Support: 1 (800) 268-0683 E-Mail T ech Support: support@ultrastarters.com Check Our Web Site: www .
Installation Guide Table Of Contents Page 2 600 Wiring Diagram Page 3 Page 5 Page 6-7 Installation Tips Page 4 Pre-Installation Suggestions Installation Suggestions Mounting The Module Installing The .
Installation Guide WIRING DIAGRAM 3 (-) Trunk Release Output Connect to main Ignition Connect to chassis ground 12vt constant power Green Green Green Red Red Blue Blue Blue Black Pink Pink Door Lock O.
Installation Guide Recommended Pre-Installation Procedures Recommended Installation Procedures Mounting the Module Installing The Led Installing The Program Button Connecting The Starter Disable Conne.
Installation Guide WIRING CONNECTORS Pink Channel 4 Output Programmable - See menu 2, setting 5. Green (-) Door Input Negative door pin switch input. Blue (-) Hood Input Negative input from hood pin switch. Purple (+) Door Input Positive door pin switch input.
Installation Guide QUICK START INST ALL 14 Pin Power Connector Step 2- Plug-In The Module Step 3- Program, Test And Adjust The Shock Sensor Your Basic Install Is Complete! Test The System Step 1 - Connect All Of the Following Wires Yo ur Basic Installation is No w Complete!! When all the connections are done, the control module can be plugged in.
Installation Guide Program mode allows you to adjust the settings and options of your system. Your system has been intelligently designed by installers with years of experience. The system’s default settings do not require any program changes in most cases.
Installation Guide PROGRAMMING 8 PROGRAM MODE - USER SETTINGS Enter User Program Mode - See Page 7. for details on entering Program Mode Setting 1- Ignition Auto Lock Setting 2- Horn Honk Settings Set.
Installation Guide PROGRAMMING 9 PROGRAM MODE - ALARM SETTINGS Setting 1 - Car Finder/ 5th Channel Setting 2 - Secure Valet Mode Setting 3 - Park Light Output Setting 4 - Horn Honk Timing Setting 5 - 4th Channel Settings Setting 6 - Car Jack Mode Setting 7 - Horn/ 5th Channel Enter Alarm Program Mode - See Page 7.
Installation Guide TRANSMITTER OPERATIONS See Owner’s Guide for More Detail on Operations 10 Press Once to Lock the doors and arm the alarm. Hold for Panic Mode. Press a second time and hold for Constant Lock Output. Press Once to Lock the doors and arm the alarm.
Installation Guide When activated, the system waits 30 seconds then flashes LED rapidly for 30 seconds, then chirps the siren as a warning for 10 seconds then goes into full alarm . Program Menu 2, Setting 5 - Mode 1 & 2 While ignition is “ ON ” press and release the # button.
Installation Guide DIAGNOSTICS 12 If the alarm system is triggered while armed, the system will retain in memory the cause of the trigger. The diagnostics can then be used to determine what the cause of the trigger was. When disarming the alarm, the siren/horn will chirp 3 times instead of the usual 2 times to indicate the alarm had been triggered.
An important point after buying a device Ultra Start 600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ultra Start 600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ultra Start 600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ultra Start 600 you will learn all the available features of the product, as well as information on its operation. The information that you get Ultra Start 600 will certainly help you make a decision on the purchase.
If you already are a holder of Ultra Start 600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ultra Start 600.
However, one of the most important roles played by the user manual is to help in solving problems with Ultra Start 600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ultra Start 600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
