Instruction/ maintenance manual of the product 23xx Ultra Start
Go to page of 12
-The system must be placed into Service Mode before any service work is started on the vehicle. It is the sole responsibility of the vehicle owner to ensure that this is done. The manufacturer accepts no liability or responsibility for accidental starting of the vehicle.
OWNER ’S GUIDE REMO TE VEHICLE ST ARTER T ab le Of Contents T able Of Content s Page 2 W elcome Page 3 Feature List About Ultra S tart FCC Notice Remote St arter Functions Page 4 Remote S tarting Ex.
R EMOTE V EHICLE ST ARTER OWNER ’S GUIDE This device complies with Part 15 of the FCC rules. Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
R emote Star t i n g Remote Sta r ter Functions 1.Press and release the button. 2.The park light s will flash and the siren will chirp one time. 3.The vehicle will then remote start. The park light s will flash four times then remain on while the vehicle is running.
Manual transmission remote st arters must be set into Reservation Mode before the remote st arter will activate. There are two different ways to place the system into Reservation Mode. The activation type of Reservation Mode is determined when the system is inst alled.
Press and hold the UNLOCK button doors will unlock (optional). Continue holding until the trunk release will activates. * The trunk release will be confirmed by one p ark light flash and siren chirp. Note: The trunk release output will not activate when the ignition key is in the On position.
Car Finder (Default Setting) 1. Press and hold the # button for 3 seconds. 2.The park light s will flash and the horn(optional) will honk 5 times. Note: This feature can be used to locate the vehicle in a crowded parking lot. T runk Release on the # button.
Cold S tart/T imer Mode will start the vehicle at a user select able st art interval or temperature setting. The vehicle can be set to st art once every 1, 2, 3 or 4 hours in T imer Mode or 0,-5,-15 or -25 Celsius in T emperature Mode (L T Models Only) for a maximum 12 start s.
Page 9 System Service Mode will disable the remote starter . This will only effect the remote st art portion of the system. The optional lock, unlock and trunk release features will still be operational. When the vehicle is to have any under hood or service work done, the system must be placed into Service Mode.
Being that the installer does not always see when the system shut s down or fails to start, Diagnostic Memory will store in memory up to four shut down codes. This information can then be accessed to determine the source of the shutdown. T o Enter Diagnostic Mode: Ste p 1 - T urn the ignition on then off.
2nd Car Operation Loc k Doors Unloc k Doors R emote Star ting R emote Stop 1. Press and release the and buttons at the same time. 2. The park light s will flash and the siren will chirp once. # LOCK doors will lock (optional), the 3. The LEDs on the antenna will start flashing within five seconds.
Limited Lif etime Warr anty The manufacturer warrants to the original purchaser of their remote starters and alarms, that the product shall be free from defects in material and workmanship.
An important point after buying a device Ultra Start 23xx (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ultra Start 23xx yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ultra Start 23xx - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ultra Start 23xx you will learn all the available features of the product, as well as information on its operation. The information that you get Ultra Start 23xx will certainly help you make a decision on the purchase.
If you already are a holder of Ultra Start 23xx, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ultra Start 23xx.
However, one of the most important roles played by the user manual is to help in solving problems with Ultra Start 23xx. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ultra Start 23xx along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
