Instruction/ maintenance manual of the product CTb 9407 Beko
Go to page of 16
Instructions Manual CTB 6407 - CTB 9407.
2 2 INDEX RECOMMENDATIONS A ND SUGGEST IONS ..................................................................................................................... 3 CHARACTER ISTICS ......................................................................
EN 3 3 RECOMMENDATIONS AND SUGGESTIONS The Instruct ions for Us e apply to severa l versions of this appliance . Accordingly, you may find descrip tions of i ndiv idual features th at do no t apply to your specific appl iance .
EN 4 4 CHARACTERISTICS 0÷152 280 598 - 898 175 ø 120 Min. 650mm Min. 650mm Components Ref. Q.ty Product Components 1 1 Hood Body, complete with: Controls, Light, Blower, Filt ers 8 1 Directional Air Outlet grille 20 1 Closing element Ref. Q.ty Installation Components 12a 4 Screws 4,2 x 44,4 12e 2 Screws 2,9 x 9,5 Q.
EN 5 5 INSTALLATION Drilling the Support surface a nd Fitting the Hood SCREW FITTING • The hood support surface must be 135 mm above the bottom surface of the wall units. • Drill the support with a ø 4,5 mm drill bit, using the drilling template provided.
EN 6 6 Connections DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø120 mm, the choice of which is left to the insta ller. • Fix the pipe in position us ing sufficient pipe clamps (not supplied).
EN 7 7 USE Control panel L Light Switches the lighting system on and off. M Motor Switches the extractor m otor on and off. V Speed Sets the operating speed of the extractor: 1. Low speed, used for a continuous and silent air change in the pres ence of light cooking vapour.
EN 8 8 MAINTENANCE Grease filters CLEANING METAL CASSETTE GREASE FILTERS • The filters must be cleaned every 2 months, or more frequentl y in case of particularl y heavy use of the hood. Filters can be washed in a dishwasher. • Pull out the sliding suction pan el.
EN 9 9.
EN 1 10.
EN 1 11.
EN 1 12.
.
.
.
436005809_v er1.
An important point after buying a device Beko CTb 9407 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beko CTb 9407 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beko CTb 9407 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beko CTb 9407 you will learn all the available features of the product, as well as information on its operation. The information that you get Beko CTb 9407 will certainly help you make a decision on the purchase.
If you already are a holder of Beko CTb 9407, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beko CTb 9407.
However, one of the most important roles played by the user manual is to help in solving problems with Beko CTb 9407. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beko CTb 9407 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
