Instruction/ maintenance manual of the product U-CLR2160SOD-41 U-Line
Go to page of 21
® 2000 SERIES CLEAR ICE MODELS CLEAR COMBO ® MODELS USE AND CARE GUIDE CLEAR COMBO® MODELS CLEAR ICE U-LINE.COM U-CLR2160B-00 U-CLR2160B-40 U-CLR2160S -00 U-CLR2160S -01 U-CLR2160S -40 U-CLR2160S -.
u-line.com FOR PRODUCT ASSIST ANCE, CALL 1-800-779-2547 MIL W AUKEE, WI U.S.A. Serial/Serie: Model/Modele: HIGH SIDE DESIGN PRESSURE 300 PSI LOW SIDE DESIGN PRESSURE 140 PSI REFRIGERA TOR AND/ BTL LISTED 674R OR FREEZER HOUSEHOLD U C L R US www .u-line.
Safety Precautions Safety Alert Defi nitions ................. .......................... ..................... ......................... ............. ....................... ........... 1 General Precautions ........................... .............
u-line.com 1 NOTICE • PLEASE READ all instru ctions befor e installing, operating, or servicing the appliance. • Proper installation pr ocedures must be follo wed when completing an inst allation or relocation of a unit.
2 u-line.com Model F eatures: High daily ice pr oduction and storag e. The CLR2160 pr oduces up to 60 pounds of ice per da y and stores up to 30 pounds. While the CLRCO2175 can produce up to 40 pounds of ice per da y and store up to 15 po unds. Electronic contr ol module .
u-line.com 3 Air Flo w NOTICE The unit requires pr op er air flow to perform at its highest efficiency . Do not block the fr ont grille or internal fans at any time, or the unit will not perform as expected. Do not install the unit behind a door . Initial Star tup All U-Line contr ols are pr eset at the factor y .
4 u-line.com Checking Pr oduct T emperatur e T o che ck the actual product temperatur e in the unit. 1. Partially fill a plas tic (nonbr eakable) bottle with wat er . 2. Insert an accurate thermom eter . 3. Tighten the bottle ca p securel y . 4. Place the bottle in the desi red ar ea for 24 hours.
u-line.com 5 Electr onic Control Quick Guide Ta s k To u c h To u c h Displa y Comment T urn ON/OFF Hold 5 seconds Release when °F flashes. or Adjust Te m p e r a t u r e CLRCO2175 or T ouch and release or T ouch to change temperature °F flashes after f irst touch, set-point sav ed after 5 seconds of i nactivity and ° F stops flas hing.
6 u-line.com Clear Ice Mak er Cleaning Cycle Units with a serial number beginni ng with an 09 or gr eater ha ve an automatic clean alert function. Clea ning cycle s should be run as notified. Oth erwise, T o maintain operational eff iciency the unit should be cleaned e very three months.
u-line.com 7 NOTICE • Discard all ice produced in the first harvest. • Should pow er to the unit be interrupted during the self-clean cycle, it will be n ecessary to repeat the complete cleaning cycle after po wer is r estored.
8 u-line.com Le veling NOTICE Unit must be le vel, for pr oper door and ice maker (if equipped) operation. For Models with adjustable lev eling feet: 1. Us e a level to check the levelness of the uni t from front to back and from side to side. Place th e le vel a long top edge and side edge as shown (1).
u-line.com 9 Remo ving and Installing Grille WARNING ! Disconnect electric pow er to the unit before r emo ving the grille . WARNING ! DO NO T touch the condenser fins (4). The condenser fins are SHARP and can be easily dama ged. Remo ving the grille.
10 u-line.com Door Alignment and Adjustment Align and adjust the door if it is not lev el, or is not sealing prope rly . If the door is not sealed the unit ma y not cool properl y , or excessiv e fros t ma y form in the interior .
u-line.com 11 Re versing Black or White Doors • The hinge hardwar e will be remov ed and reinstalled on the opposite side of the cabinet. • The top hinge har dware will be r e installed on the bottom of the opposite side of the cabinet. • The bottom hinge h ardwar e will be r einstalled on the top of the opposite side of the cabinet.
12 u-line.com Remo ve pr eexist ing bottom hing e . 1. Remov e the preexisting botto m hinge (three screws) (2). Reinstall hinge to top opposite. 1. Install the hinge just r emoved fr om the bottom to the T OP opposite side of the cab inet (thr ee scre ws) (2).
u-line.com 13 3. Gras p outer edge of stainless frame and firmly pr es s inside edge of glass i n while p ulling stai nless frame in oppos ite dir ection. 4. Unhi nge frame from door . Assemble Stainless F rame 1. Prop frame agai nst solid surface, handle side do wn and a way 2.
14 u-line.com Remo ve existing bottom hinge. 1. Remov e the existing bottom hinge (thr ee scre ws) (2). Reinstall hinge to top opposite. 1. Install the hinge just r emoved fr om the bottom to the T OP opposite side of the cab inet (thr ee scre ws) (2).
u-line.com 15 . Exterior Cleaning Vin yl Clad (Black or White) Models: • Clean surfaces with a mild dete rgent and warm water solutio n. Do not use solv ent-based or abrasive cleaners. Use a s oft sponge and rinse with clean water . Wipe with a soft, clean tow el to pr ev ent water spotting.
16 u-line.com Condenser Cleaning Interv al - Ev er y Three M onths T o maintain operational efficiency , keep th e fro nt grille fr ee of dust and lint, and clean the condenser ev er y three months. Depending on envir onmental conditions, mor e or less fr equent cleaning ma y be necessary .
u-line.com 17 Befor e Calling for Ser vice If you think y our U-Line pro duc t is malfunctioning, r ead the OPERA TION section of this guide to clearl y understand the function of the contr ol.
® USE AND CARE GUIDE ©2013 U-Line Corpor ation Publication Number 30268 4/ 2013 Rev .G The American Built-In Under c ounter Leader Since 1962 U-LINE.
An important point after buying a device U-Line U-CLR2160SOD-41 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought U-Line U-CLR2160SOD-41 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data U-Line U-CLR2160SOD-41 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, U-Line U-CLR2160SOD-41 you will learn all the available features of the product, as well as information on its operation. The information that you get U-Line U-CLR2160SOD-41 will certainly help you make a decision on the purchase.
If you already are a holder of U-Line U-CLR2160SOD-41, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime U-Line U-CLR2160SOD-41.
However, one of the most important roles played by the user manual is to help in solving problems with U-Line U-CLR2160SOD-41. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device U-Line U-CLR2160SOD-41 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
