Instruction/ maintenance manual of the product 2850 Turning Technologies
Go to page of 20
www .dell.com | support.dell.com Dell™ PowerEdge™ 1850 and 2850 Sy stems Upgrading Y our Sy stem Board and Riser Board D8781bk0.book Page 1 Wednesda y, October 6, 2004 3:43 PM.
Notes, Notices, and Cautions NOTE: A NOTE indicates important i nformation that helps you make better use of your computer . NOTICE: A NOTICE indicates either potential da mage to hardware or loss of da ta and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for propert y damage, personal injury , or death.
Upgrading Y our Sy stem Board and Riser Board 3 This document describes how to upgrade your system to support PCI-e expansion car ds. Y our upgrade kit includes a new system board and riser boar d. CAUTION: Many repairs may only be don e by a certified service tec hnician.
4 Upgrading Y our Sy stem Board and Riser Board www .dell.com | support.dell.com Figure 1-1. Installing and Removing the Riser Board 9 Remove the memory modules. See "System Memo ry" in "Installing Sy stem Options" in your Installation and T roubleshooting Guide .
Upgrading Y our Sy stem Board and Riser Board 5 14 T o remove the system board: a Lift up the blue retention pin and slide the system boar d towards the front of the system to disengage the board from the r etention tabs on the chassis. See F igure 1-2.
6 Upgrading Y our Sy stem Board and Riser Board www .dell.com | support.dell.com 5 Replace the processor(s). 6 If applicable, replace the R AC car d. 7 If applicable, replace the R AID key . 8 Replace the power supply(s). 9 Install the new riser board provided in your upgrade kit.
Upgrading Y our Sy stem Board and Riser Board 7 Removing and Replacing the Sy stem Board and Riser Board In A Dell PowerEdge 2850 Sy stem Removing the Sy stem Board 1 If applicable, remove the bezel. 2 T urn off the system and attached peripherals, a nd disconnect the system from the electrical outlet and peripherals.
8 Upgrading Y our Sy stem Board and Riser Board www .dell.com | support.dell.com Figure 1-3. Removing the Sy stem Board 17 Remove the front-fan tray : a P ress and hold the front-fan tray release button. b Slide the front-fan tray to the right until it stops.
Upgrading Y our Sy stem Board and Riser Board 9 Installing the New Sy stem Board and Riser Board 1 Unpack the new system board. 2 Carefully lower the system boar d into the chassis until the tabs on the chassis fit through the corresponding slots in the system boar d.
10 Upgrading Y our Sy stem Board and Riser Board www .dell.com | support.dell.com Figure 1-4. Removing the Expansion-Card Ri ser Board From a Dell PowerEdge 2850 Sy stem 3 Remove the expansion-car d riser board: a P ull the riser retention pin. See F igure 1-4.
D8781bk0.book Page 1 Wednesda y, October 6, 2004 3:43 PM.
Printed in the U.S.A. D8781bk0.book Page 2 Wednesda y, October 6, 2004 3:43 PM.
D8781bk0.book Page 1 Wednesda y, October 6, 2004 3:43 PM.
Printed in Malay sia. D8781bk0.book Page 2 Wednesda y, October 6, 2004 3:43 PM.
D8781bk0.book Page 1 Wednesda y, October 6, 2004 3:43 PM.
Printed in Brazil. D8781bk0.book Page 2 Wednesda y, October 6, 2004 3:43 PM.
D8781bk0.book Page 1 Wednesda y, October 6, 2004 3:43 PM.
Printed in Ireland. D8781bk0.book Page 2 Wednesda y, October 6, 2004 3:43 PM.
D8781bk0.book Page 1 Wednesda y, October 6, 2004 3:43 PM.
Printed in China. D8781bk0.book Page 2 Wednesda y, October 6, 2004 3:43 PM.
An important point after buying a device Turning Technologies 2850 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Turning Technologies 2850 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Turning Technologies 2850 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Turning Technologies 2850 you will learn all the available features of the product, as well as information on its operation. The information that you get Turning Technologies 2850 will certainly help you make a decision on the purchase.
If you already are a holder of Turning Technologies 2850, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Turning Technologies 2850.
However, one of the most important roles played by the user manual is to help in solving problems with Turning Technologies 2850. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Turning Technologies 2850 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
