Instruction/ maintenance manual of the product CRT Television TTE Technology
Go to page of 40
Televisio User's G ide ging Entertainment..
RISK OF ELECTRIC SHOCK DO NOT OPEN [DI This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1, 2. 3. 4. 5. 6. 7. 8, g, 10. 11. 12. 13. 14. 15. 16. A. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water.
Introduction Safety/precaution ............................. 2 Table of Contents ............................. 3 Features .................................... 3 Getting Started Basic Cable TV Connection ..................... 4 Basic Antenna Connection .
The Cable TV signal into your home may be a single cable (75 ohm ) or may include a Cable Box. In either case, the connection to the TV is easy. If your Cable TV signal comes directly via a 75 ohm coaxial cable, using the following steps: Connect the Cable TV signal to the 75 ohm ANTENNA INPUT jack on the rear of the TV.
A combination antenna receives normal broadcast channels (VHF 2-13 AND UHF 14-69). Your connection is easy since you will connect the antenna to the 75 OHM ANTENNA INPUT jack on the rear of the TV. If your antenna has a round cable (75 ohm) on the end, then you are ready to connect it to the TV.
The basic component (VCR, DVD player etc.) to TV connection is described below. For other hookups, refer to your component's instruction manual. Connect a yellow video cable to the VIDEO jack on the front of the TV and to the VIDEO OUT jack on your VCR (or other component).
Front View ! IL 7 6 5 4 321 Front View Your button layout may differ slightly. 1. POWER BUTTON Turns the TV on and off. 2. STANDBY (LED INDICATOR) Lights to show AC power is available. 3. SENSOR Receives infra-red signals from the remote. 4. CHANNEL +/- BUTTONS Selects channel numbers.
Battery Installation To load batteries into the remote control: Remove the battery compartment lid on the rear of the remote. Press in the tab, then lift off the lid. Place two AA batteries in the remote. Be sure the (+) and (-) ends of the batteries line up correctly (as marked inside the battery compartment).
NOTEPAD CAPS INSER_ CALENOM 0000 When operating the remote, point it directly at the front of the TV. Objects between the remote and the remote sensor can block the signal to the TV. CALENDAR Press to display or close the calendar. CAPS Press to toggle the entry mode between uppercase or lowercase letters.
You can setthe TV's on-screen menu to English, French or Spanish. Press MENU to see the main menu. Press CH+ or CH- to highlight Preferences. Press OK to enter the Preferences submenu. Language is highlighted. Press VOL+ or VOL- to select English, Francaie (French), or Espanol (Spanish).
It is important for the TV to know what type of signal-Cable TV (CATV) or a normal antenna you are using. Choose your signal (Antenna or Cable): Press MENU to see the main menu. Press CH+ or CH- to highlight Setup. Press OK to enter the Setup submenu.
You can set your TV to receive local TV channels (from an antenna) or Cable TV channels (when you have Cable TV service). Then, use Auto Search to set up channels that are available for you. This makes it easy for you to select only the available TV stations when you press CH+ or CH-.
Manual Channel Tuning allows you to search for channels that may have been missed during the Auto Search process. For example, if you are looking for a channel between 60 and 70, start the search at channel 60 and go up. Press MENU to see the main menu.
You can store five channels you prefer into the Favorite List and recall these channels easily by pressing the FAV button on the remote control. Press MENU to see the main menu. Press CH+ or CH- to highlight Setup. Press OK to enter the Setup submenu.
You can add or erase channels from the list in the TV's memory. Press MENU to see the main menu. Press CH+ or CH- to highlight Setup. Press OK to enter the Setup submenu. TV/CATV is highlighted. Press VOL+ or VOL- to select TV or CATV (whichever you have).
To adjust your TV picture, select a channel and follow the steps below: Press MENU to see the main menu. Picture is highlighted. Press OK to enter the Picture submenu. Press OH+ or OH- repeatedly to highlight your choice: Color, Brightness, Contrast, Sharpness, Tint, Blue Back (background), or C.
This function enables you to choose preset video settings for different types of programs and viewing conditions. Most picture settings are preset at the factory to automatically adjust the TV's Brightness, Color, Contrast and Sharpness. Press PRESETS on the remote control.
Follow these steps to set the clock. Press MENU to see the main menu. Press CH+ or CH- to highlight Time. Press OK to enter the Time submenu. Press CH+ or CH- repeatedly to highlight Clock. Press VOL+ or VOL- to change the time in minutes. Press and hold VOL+ or VOL- to change the time quickly in 10 minute increments; press OK.
To turn on the TV to a specific channel at a specific time, use the On-Timer. Before you begin, set the clock correctly. Details are on page 18. Press MENU to see the main menu. Press OH+ or OH- to highlight Time. Press OK to enter the Time submenu. Press OH+ or OH- repeatedly to highlight TV/CATV.
To turn off the TV at a specific time every day, use the Off-Timer. Before you begin, you must set the clock correctly. Details are on page 18. Press MENU to see the main menu. Press OH+ or OH- to highlight Time. Press OK to enter the Time submenu. Off Time is highlighted.
Closed captioning (CC) lets you read the voice content of TV programs on the TV screen. Designed to help the hearing impaired, on-screen text boxes will show dialog, conversation, and activity during TV programming. Press MENU to see the main menu. Press CH+ or CH- to highlight Preferences.
The Sleep Timer turns off the TV within an amount of time you specify (10-120 minutes from the current time). Press SLEEP repeatedly to set the sleep timer from 120 to 10 minutes in 10-minute decrements. After setting the sleep timer, press SLEEP once to display the remaining time.
Parental Lock processes program content advisories from broadcasters. Parental Lock can respond to the content advisories and block objectionable content (offensive language, violence, sexual situations, etc.) This is a great feature to censor the type of programming children watch.
Over the next few pages, you'll learn how to block programs and understand the rating terms for certain broadcasts. First set your password. Press MENU to see the main menu. Press CH+ or CH- to highlight Preferences. Press OK to enter the Preference submenu.
There are two types of ratings for Parental Lock. One is based on movie industry ratings. The other is based on TV industry ratings. Both can be used to censor programming. Let first look at the MPAA Rating options of Parental Lock. Press MENU to see the main menu.
Some program ratings are based on TV industry ratings as described below. Press MENU to see the main menu. Press CH+ or CH- to highlight Preferences. Press OK to enter the Preferences submenu. Press OH+ or OH- repeatedly to highlight Par. (Parental) Control.
After setting your password, Parental Lock also offers these special blocking options. Press MENU to see the main menu. Press OH+ or CH- to highlight Preferences. Press OK to enter the Preferences submenu. Press CH+ or CH- to highlight Par. (Parental) Control.
Child Lock allows you to lock the buttons on the front of the TV. Press MENU to see the main menu. Press OH+ or OH- to highlight Preferences. Press OK to enter the Preferences submenu. Press OH+ or OH- repeatedly to highlight FPA (Front Panel} Lock. Press VOL+ or VOL- to turn on or off FPA Lock.
Models 24V412T and 24V511T: This feature is available with these models only. You can preset sound mode that best suits your current programming among Personal, Theater, Concert and Speech. Press MENU to see the main menu. Press CH+ or CH- to highlight Sound.
Models 24V412T and 24V511T: This feature is available with these models only. You can adjust the low frequency (Bass) or high frequency (Treble). You can also adjust the Balance to increase the volume of the left and right sound channels, Press MENU to see the main menu.
Models 24V412T and 24V511T: This feature is available with these models only. When stereo signals are available, this function enhances the stereo spatial effect. Press MENU to see the main menu. Press CH+ or CH- to highlight Sound. Press OK to enter the Sound submenu.
Models 24V412T and 24V511T: This feature is available with these models only. Multi-channel Sound (MTS) broadcasts enhance TV viewing bybringing youprograms with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program (SAP), which broadcasters can use to transmit a second language or forother purposes.
This feature enables you to store personal messages and can be used as a reminder. Press NOTEPAD to display the notebook screen. Press CAPS repeatedly to toggle the entry mode between uppercase or lowercase letters. Use number buttons to enter letters, numbers, or some special symbols.
Calendar enables you to look up the date easily. Press CALENDAR to display the calendar. Press VOL+ or VOL- to display a previous or future month, e.g.
Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. Note for U.& customers: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation.
CAUTION: Turn OFF your TV before cleaning. You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation. The TV's screen may be cleaned with a soft, lint-free cloth as well.
• Damage from images burnt onto the screen. • A television that has been modified or incorporated into other products or is used for institutional or other commercial purposes. • A television purchased or serviced outside the U.S.A. • Acts of nature, such as but not limited to lightning damage.
This page intentionally left blank..
FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
An important point after buying a device TTE Technology CRT Television (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TTE Technology CRT Television yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TTE Technology CRT Television - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TTE Technology CRT Television you will learn all the available features of the product, as well as information on its operation. The information that you get TTE Technology CRT Television will certainly help you make a decision on the purchase.
If you already are a holder of TTE Technology CRT Television, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TTE Technology CRT Television.
However, one of the most important roles played by the user manual is to help in solving problems with TTE Technology CRT Television. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TTE Technology CRT Television along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
