Instruction/ maintenance manual of the product CS4210 Troy-Bilt
Go to page of 12
Oper ator’ s Man ual Chipper / Shredder Models CS4210 CS4265 PRINTED IN U .S.A. FORM NO . 769-00830A.f m (4/15/04) Model CS4210 Shown IMPOR T ANT : Read saf ety rules and instructions carefully before oper ating equipment.
2 TABLE OF CONTENTS FINDING MODEL NUMBER This Operator’s Manu al is an important part of your new c hipper shredder. It will help you assemble, prepare and main tain the unit for best performan ce.
3 SECTION 1: IMPORTANT SAFE OPERATION PRACTICES WARNING: This symbol points out import ant safety instructions whic h, if not followed, could endanger the person al safety and/or property of your self and others. Read and follow all instructions in this manual before atte mpting to operate this machine.
4 i. Never store the machine or fuel containe r inside where th ere is an open flame, spar k, or pilot light (e.g. furn ace, water heater, space heater , clothes dryer, et c.) j. To reduce a fire hazard, keep machine free of grass, le aves, or ot her debris build-up.
5 SAFETY LABELS FOUND ON YOUR UNIT SECTION 2: ASSEMBLING YOUR CHIPPER SHREDDER IMPORT ANT : This unit is shipped without gaso line or oil in the engine. Be cer tain to service engine with gasoline and oil as instructed in the Briggs & Stratton Owner/ Operator man ual packed with your unit.
6 Attaching The Debris Collection Bag • To attach the bag, place the opening of the bag completely over the ch ute deflector. • Position the bag so that the wing kno bs which secure the chute deflecto r to the impeller housing are completely covered.
7 Figure 4 SECTION 4: OPERATING YOUR CHIPPER SHREDDER WARNING: The operation of any chipper shredder can result in foreign objects being thrown. Always wear the safety glass es provided with this unit or eye shield s before chipping or shreddin g and while performing any adjustme nts or repairs.
8 • Grasp the starte r handle and pull the rope out slowly until resistance is felt. When it becomes slightly harder to pull the rope, slowly a llow the rope to recoil. Then pull rope with a r apid, continuous, full arm st roke. Keep a firm grip on starter handle.
9 • Apply intermittent pressure (force, in short pulses) while feeding larger (2- 3-inch diam eter) branches into the chipper chute, to avoid bogging or stalling the engine . IMPORT ANT : Never fee d branches with a dia meter greater than thre e (3) inches into the chipper chute.
10 Chute Deflecto r: Lubricate the pivot points on the chute deflector wit h light oil once a season. Engine: Refer to the Briggs & Stratton Ow ner/Oper ator manual packed with your unit for lubr ication instructions. Maintenance Engine Refer to the Mainte nance section of the Briggs & Stratton Owner/Opera tor manual packed with your unit.
11 Figure 9 NOTE: Use a 3/16” hex key (Allen) wrench on t he outside of the blade an d a 1/2” box (or socket) wrench on the inside of the impeller. See Figure 9. Hold the Allen wrench stationary and rot ate the box (or socket) wrench to loosen the nut.
12 Storing Y our Chipper Shredder • Clean the equipment t horoughly. • Wipe equipment with an oiled rag to prevent rust. • Refer to engine man ual for cor rect engi ne storage instructions • Store unit in a clean, dry are a. Do not store next to corrosive materials such as fertilizer.
An important point after buying a device Troy-Bilt CS4210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Troy-Bilt CS4210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Troy-Bilt CS4210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Troy-Bilt CS4210 you will learn all the available features of the product, as well as information on its operation. The information that you get Troy-Bilt CS4210 will certainly help you make a decision on the purchase.
If you already are a holder of Troy-Bilt CS4210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Troy-Bilt CS4210.
However, one of the most important roles played by the user manual is to help in solving problems with Troy-Bilt CS4210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Troy-Bilt CS4210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
