Instruction/ maintenance manual of the product BK 7671 LD PLUS Beko
Go to page of 18
Instructions for use GB BK 7671 LD PLUS.
Safety first/1 Electrical requirements/2 Transportation instructions/2 Installation instructions/2 Suggested arrangement of food in the larder fridge/3 Temperature control and adjustment/4 Before oper.
1 5 7 8 8 9 10 10 1 2 3 4 1 6.
2 4 3.
5 9 8 7 6 10 2 5 4 3 1.
Instructions for use GB 1 Safety first! Do not connect your appliance to the electricity supply until all packing and transit protectors have been removed. • Leave to stand for at least 4 hours before switching on, to allow compressor oil to settle, if transported horizontally .
Instructions for use GB 2 Electrical requirements Before inserting the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply .
Instructions for use GB 3 4. The appliance should be positioned on a smooth surface. 5. Refer to "Cleaning and Care" section to prepare your appliance for use. Suggested arrangement of food in the larder fridge Guidelines for obtaining optimum storage and hygiene: 1.
Instructions for use GB 4 T emperature control and adjustment Operating temperatures are controlled by the thermostat knob (Fig. 2) and may be set between 1 and 5, the coldest position.
Instructions for use GB 5 Movable shelves Thermostat knob Crisper cover Crisper Air grill Dairy compartment Egg compartment Adjustable door shelves Bottle gripper Bottle shelf Getting to know your appliance (Fig. 1) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Defrosting The larder refrigerator defrosts automatically .
Instructions for use GB 6 Replacing the interior light bulb Should the light fail, switch off at the socket outlet and pull out the mains plug. Then ensure the bulb is screwed securely in the bulb holder .
Instructions for use GB 7 up by about an inch and pull it off from the side where there is an opening on the cover . • T o remove a door tray , remove all the contents and then simply push the door tray upwards from the base.
Instructions for use GB 8 Don't- Don't- Don't- Don't- Don't- Don't- Leave the door open for long periods as this will make the larder refrigerator more costly to run. Cover the shelves with any protective materials which may obstruct air circulation.
548 540 min. 550 min. 50 mm min. 200 cm 2 1466 80 1370 1440 100 100 60 60 min. 50 mm 35 min. 5 6 0 1440 1370 - 0 + 4.
X 876 1466 X min.50 mm min.50 mm X min.50 mm min.50 mm min.50 mm 200 cm 2 81 200 cm 2 +4 - 0 +4 - 0.
1 90 o 2 1 3 4 6 5 82.
11 10 9 90 o 18 mm + 1 _ 40 -1 mm 83 8 7.
2 mm 2 mm 2 mm 84.
An important point after buying a device Beko BK 7671 LD PLUS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beko BK 7671 LD PLUS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beko BK 7671 LD PLUS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beko BK 7671 LD PLUS you will learn all the available features of the product, as well as information on its operation. The information that you get Beko BK 7671 LD PLUS will certainly help you make a decision on the purchase.
If you already are a holder of Beko BK 7671 LD PLUS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beko BK 7671 LD PLUS.
However, one of the most important roles played by the user manual is to help in solving problems with Beko BK 7671 LD PLUS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beko BK 7671 LD PLUS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
