Instruction/ maintenance manual of the product XL INT 2200 Tripp Lite
Go to page of 7
1 Copyright ©2000 Tripp Lite. All rights reserved. SmartPro ® is a registered trademark of Tripp Lite. Quic k Installation: p. 3 - 4 Basic Operation: p. 5 - 7 Storage & Service: p. 7 Specifications: p . 7 Safety: p . 2 W arranty & Insurance: p.
2 This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. UPS Location W arnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight.
3 Quick Installation Connect the UPS to an electrical outlet and a computer to the UPS. • Unplug the computer’s power cord from both your AC outlet and the computer’s AC input. • Insert the female plug of the computer’s cord (B) into your UPS’s AC input.
4 3 2 1 DB9 P or t Connection –Optional–* Using the grey or tan Tripp Lite cable that came with your UPS, connect your primary server’s DB9 port to the single DB9 port labeled “LAN 4.1” (which provides complete intelligent RS-232 communications).
5 Basic Operation Switches System Enable Switch (DIP Switch #4) This switch is on the back panel in the set of 4 switches next to the UPS’s DB9 ports. It activates the battery charger and intelligent microprocessor. Always leave it in the “ENABLE” (UP) position when your UPS is plugged in.
6 Other UPS Features AC Receptacles The receptacles provide your connected equipment with AC line power during normal operation and battery power during black- outs and brownouts. They also protect your equipment against damaging surges and line noise.
7 Specifications Storage & Service Storage Turn your UPS OFF: first engage the ON/Standby Switch and release it to place your UPS in the “Standby” mode, then move the System Enable Switch to the "DISABLE" (DOWN) position to prevent battery drain, then disconnect the UPS power cord from the wall outlet.
An important point after buying a device Tripp Lite XL INT 2200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite XL INT 2200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite XL INT 2200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite XL INT 2200 you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite XL INT 2200 will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite XL INT 2200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite XL INT 2200.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite XL INT 2200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite XL INT 2200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
