Instruction/ maintenance manual of the product Professional B286HK Acer
Go to page of 29
Acer LCD Monitor User's Guide.
Changes may be made peri odically to the infor mation in this publication without obligation to notify any person o f such revisions o r change s. Such chang es will be incorpo rated in new editions of this manual or supplementary documents and publ ications.
iii Special notes on LCD monitors The following are normal with the LCD monitor and do not indica te a proble m. • Due to the nature of the fluorescen t light, the screen may flicker during initial use. Turn off the power switch and then tu rn it on again to make sure the flicker disappears.
iv Accessibility Be sure that the power outlet you plug the po wer cord into is easily accessible and located as close to the equipment ope rator as possible. When you need to disconnec t power from the equipm ent, be sure to unplug the power cord from the electrical outlet.
v ampere rating of the equipment plugge d into the extension cord does not exceed the extension cord ampere rating. Also, make sure that th e total rating of all products plugg ed into the wall outlet d oes not exceed the fuse rating. • Do not overload a power outlet, strip or receptacle by plugging in too many devices.
vi Note: Adjust only those controls that are covered by the operating instructions, since improper adju stment of other controls may result in damage and will often requ ire extensive work by a qualified technician to restore the pro duct to normal cond ition.
vii Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize po llution and ensure utmo st protection of the global envi ronment, please recycle.
viii This product has been shipped enabled for power management: • Activate display’s Sleep mode with in 15 minutes of user inactivity. • Activate computer’s Sleep mode within 30 minutes of user inactivity. • Wake the computer fro m Sleep mode by pushing the powe r button.
ix Taking care of your vision Long viewing hou rs , wearing incorrect glasses or con tact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The follo wing sections provide su ggestions on how to reduce eyestrain.
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail:ru.jan@acer.com And, Acer Italy s.
Acer America Corporation 333 West San Carlos St., Suit e 1500 San Jose, CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communica tions Commission Declaration of Conformity This device com plies with Part 15 of the FCC Rules.
1 Special notes on LCD monitors iii Information for your safety and comfort iii Safety instructions iii Cleaning yo ur monitor iii Connecting /disconnec ting the device iii Accessibility iv Safe liste.
1 English Unpacking Please check that the following items are present when yo u unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future.
2 A T T A C H I N G / R E M O V I N G T H E B A S E A T T A C H I N G / R E M O V I N G T H E B A S E A T T A C H I N G / R E M O V I N G T H E B A S E A T T A C H I N G / R E M O V I N G T H E B A S .
3 S C R E E N P O S I T I O N A D J U S T M E N T S C R E E N P O S I T I O N A D J U S T M E N T S C R E E N P O S I T I O N A D J U S T M E N T S C R E E N P O S I T I O N A D J U S T M E N T S C R .
4 • • • l e v i w S l e v i w S l e v i w S l e v i w S S w i v e l With the built-i n pedestal, you can swive l the monitor for the most comfort able viewing angle.
5 English Connecting th e power cord • Check first to make sure that the pow er cord you use is the correct type required for your area. • The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area.
6 English Connector pin assignment * only for certain models PIN No. Description PIN No. Description 1 TMDS Data2+ 2 TMDS Data2 Shield 3 TMDS Data2– 4 TMDS Data1+ 5 TMDS Data1 Shield 6 TMDS Data1– 7 TMDS Data0+ 8 TMDS Data0 Shield 9 TMDS Data0– 10 TMDS Clock+ 11 TMDS Clock Shield 12 TMDS Clock– 13 CEC 14 Reserved (N.
6 English PIN No. Description PIN No. Description 1 13 2 14 3 15 4 16 1 7 1 8 7 19 2 0 9 10 11 12 5 8 6 Lane0(p) GND Lane0(n) Lane1(p) GND Lane1(n) Lane2(p) GND Lane3(n) Lane3(p) GND Lane3(n) Config1 .
7 English 24-pin color display signal cable * PIN No. Description PIN No. Description 1 TMDS data 2- 13 NC 2 TMDS data 2+ 14 +5 V power 3 TMDS data 2/4 shield 15 GND (return for +5 V hsync.
8 English Standard timing table 1 VGA 640x480@60Hz 2 VGA 640x480@72Hz 3 VGA 640x480@75Hz 4 MAC 640x480@66.66Hz 5 VESA 720x400@70Hz 6 SVGA 800x600@56Hz 7 SVGA 800x600@60Hz 8 SVGA 800x600@72Hz 9 SVGA 800x600@75Hz 10 MAC 832x624@74.
9 English Installation To install the monitor on your host system, please follow the steps below: Steps 1 Connect the video cable a Make sure both the monitor and comp uter are switched off. (1) Make sure both the monitor and computer are switche d off.
E N-13 USER CON T ROLS P o w e r Sw i t c h / P ow e r L E D: T o t u rn t h e m o n it o r O N o r OFF. Li g hts u p t o i n d i cate th e po w e r is t u r ne d O N. Us ing the Sho rtcut Menu P r e ss t h e fu n ct i o n bu tto n t o op e n t h e s ho rtcut me n u .
E N-14 Ma in Menu i con Sub Menu i c on S ub M enu it em D e scr i p ti on N / A U ser m ode U s e r d e f i n e d . Se tt i n g s c a n b e f i n e -t un e d to s u i t an y s i t u a t i on N / A N /A St a nd a rd m ode D efa u l t Set ti ng .
E N-15 Adjusting the OSD se ttings - - - - - - -- - - - - - -- - - - - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - - - - -- - - - - - -- - - - - - -- Note: The following content is for general reference only. Actual product specifications may vary.
E N-16 Adju s ting t he OSD po s it i on 1 Press the M ENU key to bring up the OSD. 2 Using the directional keys, select OSD from the on screen display.
E N-17 Adjusting the se t ting 1 Press the M ENU key to bring up the OSD. 2 Using the / keys, select Setting from the OSD. Then navigate to the feature you wish to adjust. 3 The Setting menu can be used to adjust the screen Menu Language and other important settings.
E N-18 P roduc t inform a t ion 1 Press the M ENU key to bring up the OSD. 2 Using the / keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input.
Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if y ou can self-diagnose the problem. DVI / HDMI mode Proble m LED status Remedy No picture visible Blue Using th e OSD, adjust brightness and contra st to max imum or reset to their default settings.
An important point after buying a device Acer Professional B286HK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acer Professional B286HK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acer Professional B286HK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acer Professional B286HK you will learn all the available features of the product, as well as information on its operation. The information that you get Acer Professional B286HK will certainly help you make a decision on the purchase.
If you already are a holder of Acer Professional B286HK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acer Professional B286HK.
However, one of the most important roles played by the user manual is to help in solving problems with Acer Professional B286HK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acer Professional B286HK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
