Instruction/ maintenance manual of the product SU1000RTXL2UHV Tripp Lite
Go to page of 16
Owner’ s Man ual 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 • www .tripplite.com Impor tant Safety Instructions 2 Installation 3 Basic Operation 6 Battery Replaceme.
UPS Location W arnings • Install your UPS indoors, away from e xcess moisture or heat, conductiv e contaminants, dust or direct sunlight. • For best performance, keep the indoor temperature between between 32º F and 104º F (0º C and 40º C). • Leav e adequate space around all sides of the UPS for proper ventilation.
Rackmount 1) Loosen the wingnuts on each of the two UPS Side Supports; adjust the length of the supports to match the depth of your rack; tighten wingnuts. 2) Mount both UPS Side Supports in your rack on the inside surfaces of the rack rails. Note: Both support ledges should face inwar d.
Connection and Start-Up Plug your UPS’ s line cor d into an electrical outlet. If your model features a detachable line cord, first plug the female end into your UPS’ s A C Input Receptacle.
Optional Connections Y our UPS will function pr operly without these connections. Serial P or t Connection Using the serial cable provided, connect a serial port on your computer to the serial port of your UPS. See Communications in the Basic Operation section of this manual to determine how to monitor and manage your UPS using this port.
Front P anel Switches “ON/TEST” Switch: This switch controls four separate UPS functions: UPS Po wer ON T o turn the UPS on, press this switch, hold it for se veral seconds until you hear a beep, then release it. The “ON LINE” LED will illuminate.
Front P anel Indicator Lights continued “BYP ASS” LED: This yellow light will illuminate to indicate that the UPS’ s DC/AC in verter is deacti vated and the UPS is in the “Bypass” mode.
Rear Panel “REPLA CE BA TT” LED: This red light will illuminate constantly an d the UPS alarm will sound three beeps* if your UPS’ s microprocessor detects a battery fault or if your UPS fails the automatic self-test (after you turn your UPS ON) and the UPS battery is less than fully charged.
Rear Panel continued Output Circuit Br eakers Switches (Select Models Only): These resettable circuit breakers protect your UPS from output ov erload. If one or both breakers trip, remov e some of the load on the circuit(s) and allow the UPS to cool before pressing the break er switch(es) in to reset.
The UPS’ s control panel lights will turn on in the sequences below to signal that the UPS is having operational dif ficulties. Lights (On/Flashing) and Condition Solution On: REPLA CE BA TT Let the.
T r oubleshooting (continued) Lights (On/Flashing) and Condition Solution On: F A UL T , BYP ASS, LINE, 100%, 75% Check the UPS to be sure that there is Condition: On Bypass due to High adequate space f or air to circulate near Internal T emperature the vents and that the f an is working properly .
Under normal conditions, the original battery in your UPS will last sev eral years. Contact T ripp Lite for information about replacement batteries. Battery replacement should be performed only by qualified service personnel.
Battery Replacement (continued) A D C F When replacing the batteries on a SU1500R TXL2U, SU1500R TXL2UHV , SUINT1500R TXL2U, SU2200R TXL2U, SU2200R TXL2UHV , SUINT2200R TXL2U, SU3000R TXL2U, SU3000R T.
Storage and Service First turn your UPS OFF: press the “OFF” switch to turn power of f at the UPS outlets, then disconnect the power cord from the w all outlet.
Specifications (continued) Model SU3000R TXL3U SU3000RTXL3UHV SUINT3000RTXL3U Input V oltage (< 70% Load): 65-138V 130-275V 130-275V Input V oltage (Full Load): 80-138V 160-275V 160-275V Output V o.
1111 W . 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www .tripplite.com 200208159 93-2091_EN.
An important point after buying a device Tripp Lite SU1000RTXL2UHV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite SU1000RTXL2UHV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite SU1000RTXL2UHV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite SU1000RTXL2UHV you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite SU1000RTXL2UHV will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite SU1000RTXL2UHV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite SU1000RTXL2UHV.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite SU1000RTXL2UHV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite SU1000RTXL2UHV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
