Instruction/ maintenance manual of the product SmartOnline SU1000RT2UHV Tripp Lite
Go to page of 12
Copyright ©2001 Tripp Lite. All rights reserved. SmartOnline ™ is a trademark of T ripp Lite. 1111 W . 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 www .tripplite.com Installation: p. 3 - 5 Basic Operation: p. 6 - 9 Storage & Service: p.
2 Impor tant Safety Instructions SA VE THESE INSTR UCTIONS This manual contains important instructions and warnings that should be followed while installing, operating & storing all T ripp Lite UPS Systems. UPS Location W arnings • Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight.
3 Mounting Rac kmount 1) Loosen the wingnuts on each of the two UPS Side Supports; adjust the length of the supports to match the depth of your rack; tighten wingnuts. 2) Mount both UPS Side Supports in your rack on the inside surfaces of the rack rails.
4 2 1 Connection & Star t-Up Plug y our UPS's Line Cor d into an electrical outlet. If your model f eatures a detachable line cord, first plug the f emale end into your UPS’ s A C Input Receptacle.
5 Y our UPS will function proper ly without these connections. Serial P or t Connection Using the serial cable provided, connect a seri- al por t on your computer to the serial por t of your UPS . Install T ripp Lite's P owerAlert soft- ware (pro vided on CD) on the computer .
6 Basic Operation “ON/TEST” Switc h: This switch controls four separate UPS functions: UPS P ower ON T o turn the UPS on, press this switch, hold it for several seconds until you hear a beep, then release it. The “ON LINE” LED will illuminate.
7 “BYP ASS” LED: This yellow light will illuminate to indicate that the UPS’s DC/AC inverter is deactivated and the UPS is in the “Bypass” mode.
Rear P anel Accessor y Slot: Remove the small cover panel from this slot to use optional accessories to remotely monitor and control your UPS. Contact Tripp Lite Customer Support at (773) 869-1234 for more information, including a list of available SNMP , network management and connectivity products.
9 Rear P anel (Continued) Output Cir cuit Breaker s Switches (Select Models Onl y): These reset- table circuit breakers protect your UPS from output overload. If one or both breakers trip, remove some of the load on the circuit(s) and allow the UPS to cool before pressing the breaker switch(es) in to reset.
10 Under normal conditions, the original battery in your UPS will last several years. Contact Tripp Lite for information about replacement batteries. Battery replacement should be performed only by qualified service personnel.
11 Specifications Storage & Service Storage First turn your UPS OFF : press the “OFF” switch to turn power off at the UPS out- lets, then disconnect the power cord from the wall outlet.
12 Model SU3000RT3U SU3000R T3UHV Input V oltage: 120V 200/208/240V Input Breaker Rating: 40A 25A Input Plug T ype: L5-30P L6-20P Recommended Utility Amps: 30A 20A Output Capacity (V A/Watts): 3000/2400 3000/2400 Batter y Runtime (Half Load/Full Load) Min.
An important point after buying a device Tripp Lite SmartOnline SU1000RT2UHV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite SmartOnline SU1000RT2UHV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite SmartOnline SU1000RT2UHV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite SmartOnline SU1000RT2UHV you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite SmartOnline SU1000RT2UHV will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite SmartOnline SU1000RT2UHV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite SmartOnline SU1000RT2UHV.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite SmartOnline SU1000RT2UHV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite SmartOnline SU1000RT2UHV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
