Instruction/ maintenance manual of the product SMART2200SLT Tripp Lite
Go to page of 32
Owner’ s Man ual 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 • www .tripplite.com Impor tant Safety Instructions 2 Quic k Installation 3 Basic Operation 5 Storage and Service 9 Español Copyright © 2006 T ripp Lite.
2 Impor tant Safety Instructions SA VE THESE INSTRUCTIONS This manual contains important instructions that should be followed during the installation, operation and storage of all T ripp Lite UPS Systems. Failure to heed these warnings will void your warranty .
3 Quic k Installation Plug the UPS into an outlet on a dedicated circuit.* NOTE! after you plug the UPS into a live AC outlet, the UPS (in “S tandby” mode) will automatically charge its batteries,** but will not supply power to its outlets until it is turned ON (see S tep 3 below).
4 Optional Installation These connections are optional. Y our UPS will function properly without these connections. USB and RS-232 Serial Communications Use the included USB cable (see ) and DB9 serial cable (see ) to connect the communication port on your computer to the communication port of your UPS.
5 “ON/OFF/ST ANDBY” Button • T o turn the UPS ON: with the UPS plugged into a live AC wall outlet*, press and hold the “ON/OFF/ST ANDBY” button for one second.** Release the but- ton. If utility power is absent, you can “cold-start” the UPS (i.
6 Basic Operation continued Indicator Lights (Front P anel) All Indicator Light descriptions apply when the UPS is plugged into a wall outlet and turned ON. “POWER” LED: this green LED lights continuously when the UPS is ON and supplying connected equipment with AC power from a utility source.
7 Basic Operation continued Other UPS Features (Rear Panel) AC Receptacles: Y our UPS features 15/20- and 20- or 30-amp AC outlets. These output receptacles provide your connected equipment with AC line power during normal operation and battery power during blackouts and brownouts.
8 Basic Operation continued Power Sensitivity Adjustment: This dial is normally set fully counter-clockwise, which enables the UPS to provide maximum protection against waveform distortions in its AC input.
9 Storage and Service Storage Before storing your UPS, turn it completely OFF: with the UPS ON and receiving utility power , press and hold the “ON/OFF/ST ANDBY” button for one second (an alarm will beep once briefly after the interval has passed); then, unplug the UPS from the wall outlet.
10 FCC RADIO/TV INTERFERENCE NOTICE: (FOR CLASS A MODELS) Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when operated in a commercial environment.
Man ual del pr opietario 1111 W. 3 5 t h S t r e e t C h i cago, IL 60609 USA Soporte al cliente: (773) 869-1234 • www .tripplite.com Instrucciones de seguridad impor tantes 12 Instalación rápida 13 Operación básica 15 Almacenamiento y servicio 19 English Copyright © 2006 T ripp Lite.
12 Instrucciones de seguridad impor tantes GU ARDE EST AS INSTRUCCIONES Este manual contiene importantes instrucciones que deben seguirse durante la instalación, operación y el almacenamiento de todos los UPS de T ripp Lite. La no observancia de estas advertencias anulará su garantía.
13 Instalación rápida Conecte el UPS en una salida de un circuito dedicado.* NOT A Después de conectar el UPS en una toma de corriente alterna con energía, el equipo (en modo “S tandby”) carga.
14 Instalación opcional Estas conexiones son opcionales. Su UPS funcionará correctamente sin ellas. Comunicaciones USB y serie RS-232 Use el cable USB incluido (vea ) y/o el cable serie DB9 (vea ) para conectar el puerto de comunicaciones de su computadora al puerto de comunicaciones de su UPS.
15 Botón "ON/OFF/ST ANDBY" (Encendido/Apagado/Reserva) • Para encender el UPS: Con el UPS conectado en una toma de CA con energía*, presione y mantenga presionado el botón “ON/OFF/ST ANDBY” (Encendido/Apagado/Reserva) por un segundo.
16 Operación básica (continúa) Luces indicadoras (P anel frontal) T odas las descripciones de luces indicadoras se aplican cuando el UPS está conectado en un tomacorriente y encendido.
17 Operación básica (continúa) Otras funciones del UPS (P anel posterior) T omas de CA: Su UPS tiene salidas de CA de 15/20 amperios y 20 o 30 amperios.
18 Operación básica (continúa) Ajuste de sensibilidad de energía: Este dial está fijado normalmente totalmente contra el sentido del reloj, lo que permite que el UPS proporcione una protección máxima contra distorsiones de la forma de onda en su entrada de CA.
19 Almacenamiento y servicio Almacenamiento Antes de almacenar su UPS, apáguelo: Con el UPS encendido y recibiendo energía de la red, presione y man- tenga presionado el botón "ON/OFF/ST ANDBY.
20 20 A VISO DE INTERFERENCIA DE RADIO/TV DE LA FCC : (P ARA MODELOS CLASE A) Nota: Este equipo ha sido probado y cumple con los límites para un dispositivo digital Clase A, de acuerdo con la Parte 15 de las Reglas FCC.
Man uel du pr opriétaire 1111 W. 3 5 t h S t reet Chicago, IL 60609 É.-U. Service à la clientèle (773) 869-1234 • www .tripplite.com Directives de sécurité impor tantes 22 Installation rapide 23 Fonctionnement de base 25 Entreposage et service 29 English Copyright © 2006 T ripp Lite.
22 Directives de sécurité impor tantes CONSER VER CES DIRECTIVES Ce manuel contient des directives importantes que vous devez respecter durant l'installation, l'utilisation et l'en- treposage de tous les systèmes UPS T ripp Lite. Ne pas tenir compte de ces mises en garde entraînera l'annulation de la garantie.
23 Installation rapide Brancher l'UPS dans une prise d'un circuit dédié* REMARQUE! Après le branchement de l'UPS dans une prise de secteur , l'UPS (en mode " S tandby [atte.
24 Installation en option Ces connexions sont optionnelles. V otre UPS fonctionnera cor- rectement sans ces connexions. P or ts de communication de série USB et RS-232 Utiliser le câble USB inclus (voir ) et/ou le câble de série DB9 (voir ) pour brancher le port de communication de votre ordinateur au port de communication de votre UPS.
Bouton “ ON/OFF/ST ANDBY ” (Marche/Arrêt/Attente) • Pour mettre en mar che l'UPS : L'UPS étant branché dans une prise murale de secteur , appuyer sur le bouton “ ON/OFF/ST ANDBY ” et le maintenir durant une seconde. ** Relâcher le bouton.
26 Fonctionnement de base, suite V oy ants indicateurs (P anneau av ant) T outes les descriptions de voyants indicateurs s'appliquent lorsque l'UPS est branché sur une prise murale et mis sous tension.
27 Fonctionnement de base, suite A utres caractéristiques de l'UPS (panneau arrière) Prises d'alimentation c.a. : V otre UPS est équipé de prises c.
28 Fonctionnement de base, suite Réglage de sensibilité d'alimentation : Le rotateur est normalement réglé à fond dans le sens anti-horaire; cela permet à l'UPS d'assurer une protection optimale contre les distorsions de forme d'onde à son entrée secteur .
29 Entreposage et service Entreposage A vant d'entreposer votre UPS, l'éteindre complètement. A vec l'UPS sous tension et sur le courant du secteur, appuyer sur le bouton " ON/OFF/ST ANDBY " pendant une seconde (une alarme bippera brièvement une fois ce temps passé); débrancher ensuite l'UPS de la prise murale.
30 AVIS DU FCC CONCERNANT LES INTERFÉRENCES RADIO/TÉLÉ : (POUR LES MODÈLES DE CLASSE A) NOTE : Cet équipement a été testé et trouvé compatible avec les limites d'un dispositif numérique de Classe A, conformément à la partie 15 des règlements du FCC.
31 200607046 93-2571 SMARTSLT OM.qxd 9/27/2006 2:05 PM Page 31.
32 200607046 93-2571 200607046 93-2571 SMARTSLT OM.qxd 9/27/2006 2:05 PM Page 32.
An important point after buying a device Tripp Lite SMART2200SLT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite SMART2200SLT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite SMART2200SLT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite SMART2200SLT you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite SMART2200SLT will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite SMART2200SLT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite SMART2200SLT.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite SMART2200SLT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite SMART2200SLT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
