Instruction/ maintenance manual of the product SMART1000RM1U Tripp Lite
Go to page of 5
Tripp Lite 1111 West 35th Street Chicago, IL 60609 USA Telephone: +(773) 869 1234 E-mail: saleshelp@tripplite.com Model #: SMART1000RM1U SmartPro Rackmount UPS - Line interactive, sine wave UPS with i.
severity and reduces overvoltages by 12% Network interfaces support simultaneous communications via USB, DB9 serial and SNMPWEBCARD slot Included PowerAlert UPS monitoring software supports safe unatt.
Battery recharge rate 2-4 hours to 90% Replacement Battery Cartridge RBC69-1U VOLTAGE REGULATION Voltage regulation description Line interactive voltage regulation system corrects input voltages between 83 and 147 back to usable 120V nominal levels.
Battery mode BTU/hr. (Max.) 189.2 COMMUNICATIONS Network monitoring port Includes 2 built-in monitoring ports, 1-USB & 1-DB9. Each supports on battery, low battery, power restored, AC line voltage.
Surge Protectors DTEL2 Network Surge Suppressor - Essential protection for data and communication lines Qty: [optional] DNET1 Network Surge Suppressor - Essential protection for data and communication.
An important point after buying a device Tripp Lite SMART1000RM1U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite SMART1000RM1U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite SMART1000RM1U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite SMART1000RM1U you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite SMART1000RM1U will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite SMART1000RM1U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite SMART1000RM1U.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite SMART1000RM1U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite SMART1000RM1U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
