Instruction/ maintenance manual of the product Xenyx 1204 Behringer
Go to page of 13
Version 1.0 January 2006 Users Manual XENYX 1204/1204FX.
2 XENYX 1204/1204FX This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 XENYX 1204/1204FX T ABLE OF CONTENTS 1 . INTRODUCTION .. ...................................................................................................... 4 1.1 General mixing console functions ..................................................
4 XENYX 1204/1204FX 1. INTRODUCTION Congratulations! In purchasing the BEHRINGER XENYX you have acquired a mixer whose small size belies its incredible versatility and audio performance. The XENYX Series represents a milestone in the development of mixing console technology.
5 XENYX 1204/1204FX 1.1 General mixing console functions A mixing console fulfils three main functions: s Signal processing : Preamplification, level adjustment, mixing of effects, frequency equalization.
6 XENYX 1204/1204FX + Please remember that you can only use either the microphone or the line input of a channel at any one time. You can never use both simultaneously! LOW CUT The mono channels of the mixing consoles have a high-slope LOW CUT filter for eliminating unwanted, low-frequency signal components (75 Hz, 18 dB/octave).
7 XENYX 1204/1204FX SOLO The SOLO switch (1204FX only) is used to route the channel signal to the solo bus (Solo In Place) or to the PFL bus (Pre Fader Listen).
8 XENYX 1204/1204FX + You can also use these connectors as additional line inputs. STEREO AUX RETURN 2 The STEREO AUX RETURN 2 connectors serve as the return path for the effects mix generated using the FX control.
9 XENYX 1204/1204FX +48 V The red +48 V LED lights up when the phantom power supply is switched on. The phantom power supply is necessary for condenser microphones and is activated using the switch on the rear of the device.
10 XENYX 1204/1204FX 3, 5 and 7 and in the second pass, on tracks 2, 4, 6 and 8. CONTROL ROOM OUTPUTS The control room output is normally connected to the monitor system in the control room and provides the stereo mix or, when required, the solo signal.
11 XENYX 1204/1204FX 4. INSTALLATION 4.1 Rack mounting The packaging of your mixing console contains two 19" rack mount wings which can be installed on the side panels of the console. Before you can attach the rack mount wings to the mixing console, you need to remove the screws holding the left and right side panels.
12 XENYX 1204/1204FX 5. SPECIFICATIONS Mono inputs Microphone inputs (XENYX Mic Preamp) T ype XLR, electronically balanced, discrete input circuit Mic E.I.N. (20 Hz - 20 kHz) @ 0 W source resistance -134 dB / 135.7 dB A-weighted @ 50 W source resistance -131 dB / 133.
13 XENYX 1204/1204FX 6. WARRANTY T echnical specifications and appearance subject to change without notice. The information cont ained herein is correct at the ti me of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners.
An important point after buying a device Behringer Xenyx 1204 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer Xenyx 1204 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer Xenyx 1204 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer Xenyx 1204 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer Xenyx 1204 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer Xenyx 1204, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer Xenyx 1204.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer Xenyx 1204. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer Xenyx 1204 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
