Instruction/ maintenance manual of the product PowerVerter 93-1911 Tripp Lite
Go to page of 20
Copyright © 2001 T ripp Lite. All rights reser ved. 1111 W . 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 www .tripplite .com Configuration & Connection: p. 5-10 Features: p. 10 - 11 W arranty: p. 12 T r oubleshooting: p. 13 Safety: p.
2 Intr oduction Congratulations! Y ou’v e purchased the most advanced, f eature-rich integrated in ver ter/batter y charger on the market. Y our APS provides y our equipment with utility-supplied AC.
3 Adv anced, 3-Sta ge Battery Charger Y our APS recharges y our batter y f aster than conv entional chargers because its three-stage charger pro- file (Bulk, Absor ption and Float) are optimized, regardless of the type of batter y you use (W et or Gel).
4 Safety This manual contains impor tant instructions and war nings that should be f ollowed during the installation, operation and storage of all T ripp Lite APS Systems. APS Location W arnings • Install your APS indoors , aw ay from e xcess moisture or heat, dust or direct sunlight.
4 4 3 3 2 2 1 1 5 Configuration CONFIGURA TION DIP SWITCH SETTINGS DIP SWITCH GR OUP A (All models) BA TTER Y TYPE / V OL T A GE POINT Using a small tool, set the 4 “Batter y T ype / V oltage P oint” Configuration DIP Switches, Group A (located on the front panel of your APS; see Diagram 1, p .
6 • Load Sharing (DIP Switches #1, Group B & #2, Group B) Y our APS f eatures a high-output batter y charger that can draw a significant amount of po wer from your line po wer source when charging at its maximum rate .
7 • Limit Battery Charger (APS 1012 and APS 2012 only) (DIP Switch #4, Group B) T o prev ent ov erheating smaller batteries, the charger on these UPS systems is initially set to deliv er only a fraction of its maximum pow er rating to connected batteries.
8 Mounting (Optional*) (See Diagram 2, p. 32). User must supply all f asteners and brac kets and v erify their suitability for use with the intended mounting surf ace. T urn your APS P ow erV er ter and connected equipment OFF before mounting. • Install two 8 mm (1/4 in.
9 v ehicular batter y connection. Choose the Basic Connection if you are running light hand tools or other small appliances f or a br ief period of time (see Diagram 7, p. 34) . Choose the Adv anced Connection if you are using y our APS to power hea vy loads f or extended periods of time (see Diagram 8, p.
10 Set Operating Mode Switch continued • Switch to “CHARGE ONL Y” when you are not using connected equipment. (W ARNING! APS will not pro vide batter y backup!) AD V ANT AGES: A) Continues to charge batter y when power is present, and B) T urns OFF the APS’ s inv er ter , pre venting battery drain during blac kouts or brownouts .
11 8. “B A TTER Y HI/MED/LO” (All models) These three lights will tur n ON in se ver al sequences to show the appro ximate charge lev el and v oltage of your connected batter y bank and aler t you.
12 Limited W arranty T r ipp Lite warrants its products to be free from def ects in materials and workmanship for a period of one year (domestic) or 12 0 days (e xpor t) from the date of initial purchase. T r ipp Lite’ s obligation under this warr anty is limited to repair ing or replacing (at its sole option) any such def ective products.
13 T r y these remedies f or common APS problems bef ore calling for help . Call T r ipp Lite Customer Ser vice at (773) 869-1234 bef ore retur ning your APS f or ser vice. SYMPT OM PROBLEMS CORRECTIONS APS does not provide APS not properly connected to Connect APS to utility power .
14 Specifications (Cor ded Models) CORDED MODELS: APS 1012 APS 1024 Weight: 26.4 lbs. 26.4 lbs. INVERTER Continuous pow er (@ 20° C): 900 W 1000 W Surge power (5 seconds): 1800 W 2000 W Efficiency (Full Load): 90% 90% Minimum DC Fuse Rating: 225A 125A DC Input Current @ Nominal V DC Full Load 95 A 47 A No Load 2.
15 Specifications (Har dwired Models) HARD WIRED MODELS: APS 2012 APS2424 Weight: 38.0 lbs. 41.0 lbs. INVERTER Continuous pow er (@ 20° C): 2000 W 2400 W Surge power (5 seconds): 4000 W 4800 W Efficiency (Full Load): 90% 90% Minimum DC Fuse Rating: 500A 300A DC Input Current @ Nominal V DC Full Load 192 A 112 A No Load 2.
32 2 Diagrams/Esquemas 3 1 See “Configuration”, pg. 5. 1.1 is DIP Switch Group A. 1.2 is DIP Switch Group B. Refiérase a la sección “Configuración”, página 20. 1.1 representa el Grupo A de Interruptores DIP . 1.2 representa el Grupo B de Interruptores DIP See Hard wire Electrical Connections, pg.
33 4 5 6 X/2 V olts X/2 V olts 6.1 X V olts X V olts X V olts X V olts 5.1 See Battery Connection, Pg.8. 4.1 is the fuse . X = Y our APS's Inverter's Nominal Input V oltage . (See specs.) Refiérase a la sección “Conexión de Baterías”, página 23.
34 7 7.4 7.1 7.3 12V 8.6 8.1 8.3 8.4 12V 8.2 8.3 8.5 12V 8 7.2 Basic 12VDC Vehicular Battery Connection. See Pg.8. 7.1 is the alternator . 7.2 is the vehicle battery ground. 7.3 is the vehicle battery . 7.4 is the fuse. Conexión Básica de Baterías de 12V de CD en V ehículos.
35 1. Interruptor “Operating Mode” (Modo de operación) 2. Grupo A de Interruptores DIP (T odos los modelos) 3. Grupo B de Interruptores DIP (Modelos selectos únicamente) 4. “LINE” (Línea) (T odos los modelos) 5. “INV” (In versor ) (T odos los modelos) 6.
36 93-1911 (200103046) 1111 W . 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 www .tripplite.com 200103046 120V APS MV-cabinetEn-Sp 93-1911.
An important point after buying a device Tripp Lite PowerVerter 93-1911 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite PowerVerter 93-1911 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite PowerVerter 93-1911 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite PowerVerter 93-1911 you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite PowerVerter 93-1911 will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite PowerVerter 93-1911, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite PowerVerter 93-1911.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite PowerVerter 93-1911. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite PowerVerter 93-1911 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
