Instruction/ maintenance manual of the product OMNISMART1050 Tripp Lite
Go to page of 4
Tripp Lite 1111 West 35th Street Chicago, IL 60609 USA Telephone: +(773) 869 1234 E-mail: saleshelp@tripplite.com Model #: OMNISMART1050 Omni Smart UPS System- Line Interactive UPS Corrects Severe Brownouts and Overvoltages Highlights 1050VA / 1.
Supports a half load of 525VA for 23 minutes Automatic Voltage Regulation (AVR) circuits correct brownouts as low as 75 and overvoltages as high as 147 volts to normal 120 volt levels without using ba.
Voltage regulation description Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 75V and overvo.
Transfer time from line power to battery mode 2-4 milliseconds Low voltage transfer to battery power Switches to battery power as line voltage decreases to 75 volts or less.
An important point after buying a device Tripp Lite OMNISMART1050 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite OMNISMART1050 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite OMNISMART1050 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite OMNISMART1050 you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite OMNISMART1050 will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite OMNISMART1050, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite OMNISMART1050.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite OMNISMART1050. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite OMNISMART1050 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
