Instruction/ maintenance manual of the product OMNI500ISO Tripp Lite
Go to page of 9
Owner’ s Man ual 1111 W. 35th Street, Chicago, IL 60609 USA Customer Support: (773) 869-1234 • www .tripplite.com Impor tant Safety Instructions 2 Quic k Installation 3 Basic Operation 4 Storage &.
Impor tant Safety Instructions 2 UPS Location W arnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight. • For best performance, keep the indoor temperature between between 32º F and 104º F (0º C and 40º C).
3 Quic k Installation Connect y our UPS to an electrical outlet. Y our UPS will run a self-test after it is plugged in. See Basic Operation to understand the results of its self-test. Plug y our computer , monitor and other equipment into the UPS system.
4 Use the ON/OFF button to do three things: Switch your UPS’ s Operating Mode: While your UPS is plugged into a live AC outlet, press the ON/OFF button and hold it until you hear a beep (about 2 seconds) to toggle between the following operat- ing modes.
5 • CHARGE ONL Y Mode: DISABLES battery backup. UPS Conditions: The UPS charges its battery and supplies power at its receptacles when it is receiving utility line power .
All Indicator Light descriptions apply when the UPS is plugged into an AC outlet and turned on. LINE POWER: This green light will turn ON whenever your UPS is receiving normal AC line power . It will flash while the UPS is in CHARGE ONL Y mode to indicate that the UPS will not provide battery backup during a black- out or brownout.
7 Storage All connected equipment should be turned off, then disconnected from the UPS to avoid bat- tery drain. Unplug your UPS from its AC receptacle, then press and hold its ON/OFF button to deactivate it.
8 FCC RADIO/TV INTERFERENCE NOTICE: (FOR CLASS A MODELS) Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when operated in a commercial environment.
1111 W . 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www .tripplite.com 200607050 93-2490_EN.
An important point after buying a device Tripp Lite OMNI500ISO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite OMNI500ISO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite OMNI500ISO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite OMNI500ISO you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite OMNI500ISO will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite OMNI500ISO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite OMNI500ISO.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite OMNI500ISO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite OMNI500ISO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
