Instruction/ maintenance manual of the product EMS Series Tripp Lite
Go to page of 13
Owner’ s Man ual Reliable Mobile EMS P ower Congratulations! Y ou’ve purchased the most advanced, feature-rich Inverter/Charger designed as an uninterruptible power source for medical equipment in ambulance/EMS vehicles.
2E Impor tant Safety Instructions SA VE THESE INSTR UCTIONS! This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all T ripp Lite Inverter/Chargers.
3E Feature Identification Configuration DIP Switches: optimize Inverter/Charger operation depending on your application. See pages 5-6 for setting instructions. Operating Mode Switch: controls Inverter/Charger operation. The “AUTO/REMOTE” setting ensures your equipment receives constant, uninterrupted AC power .
Switch Modes After configuring, mounting and connecting your Inverter/Charger , you are able to operate it by switching between the following oper- ating modes as appropriate to your situation: AUTO/REMOTE: Switch to this mode when you need constant, uninterrupted AC power for connected equipment.
5E Configuration Select Battery T ype—REQUIRED CAUTION: The Battery T ype DIP Switch setting must match the type of batteries you connect, or your batteries may be degraded or damaged over an extended period of time. See “Battery Selection,” p. 7 for mor e information.
6E Configuration (Continued) Set Battery Charging Amps—OPTIONAL Check specifications for your unit’ s high- and low-charging amp options. By setting on high charging, your batteries will char ge at maxi- mum speed. When setting on low char ging, you lengthen the life of your batteries (especially smaller ones).
7E Battery Selection Example 75 DC Amps × 5 Hrs. Runtime × 1.2 Inefficiency Rating = 450 Amp-Hour s Select A uxiliary Battery T ype (if an y) Select “Deep Cycle” batteries to receive optimum performance from your Inverter/Charger . Batteries of either W et-Cell (vented) or Gel-Cell /Absorbed Glass Mat (sealed) construction are ideal.
Mounting W ARNING! Mount y our In ver ter/Charger BEFORE DC batter y and A C power connection. Failure to f ollow these instructions ma y lead to per sonal injury and/or damage to the In ver ter/Charger and connected systems.
9E • Connect DC W iring: Though your Inverter/Charger is a high-ef ficiency con- verter of electricity , its rated output capacity is limited by the length and gauge of the cabling running from the battery to the unit. Use the shortest length and largest diameter cabling (maximum 2/0 gauge) to fit your Inverter/ Charger's DC input terminals.
Gr ound* • Connect the incoming and outgoing ground wires to the GROUND (green) terminal . AC Input • Connect the incoming hot wire to the input hot (brown) terminal . • Connect the incoming neutral wire to the input neutral (blue) terminal . AC Output • Connect the outgoing hot wire to the output hot (black) terminal .
11E Service Maintenance Before returning your Inverter/Charger for service, follow these steps: 1.) Review the installation and operation instructions to ensure that the service problem does not originate from a misreading of the instructions. Also, check that the circuit breaker(s) are not t ripped.
12E T ry these remedies for common Inverter/Charger problems before calling for assistance. Call T ripp Lite Customer Service at (773 ) 869-1234 before returning your unit for service. T roub leshooting SYMPT OM PROBLEMS CORRECTIONS No AC Output Unit is not properly connected to utility power Connect unit to utility power .
Specifications MODEL NUMBER: EMS1012UL EMS1250UL EMS2012UL Series Number : AGAP100012MV3 AGAP5094 AGAP200012MV3 AC Input Connection: Input Cord Input Cord Hardwire INVERTER Common Specifications for A.
An important point after buying a device Tripp Lite EMS Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite EMS Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite EMS Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite EMS Series you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite EMS Series will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite EMS Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite EMS Series.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite EMS Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite EMS Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
