Instruction/ maintenance manual of the product V-TONE GM110 Behringer
Go to page of 9
V-TONE GM110 Version 1.4 May 2006 User’s Manual.
2 V-TONE GM110 IMPORTANT SAFETY PRECAUTIONS This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 V-TONE GM110 GM11 GM11 GM11 GM11 GM11 0 0 0 0 0 V-TONE V-TONE V-TONE V-TONE V-TONE True Analog Modeling 30-Watt Guitar Amp with 10" BUGERA ™ Speaker V Powerful 30-Watt guitar workstation with.
4 V-TONE GM110 1. INTRODUCTION Thank you for purchasing the V-TONE GM110. The GM110 is a modern Guitar Workstation that sets new standards in practice amp engineering.
5 V-TONE GM110 2. CONTROL ELEMENTS 1.1 The design concept The philosophy behind BEHRINGER products guarantees a no-compromise circuit design and employs the best choice of components. The operational amplifiers employed by BEHRINGER and used in the V-TONE GM110 are exceptional: they boast extreme linearity and very low distortion characteristics.
6 V-TONE GM110 INPUT is the GM110’s 1/4" jack input for your guitar. Use a commercial 1/4" jack mono cable (not from a DIY shop, but from a specialist music dealer).
7 V-TONE GM110 3. WIRING TIPS SERIAL NUMBER . You can use the SPEAKER socket to connect an additional loudspeaker to your V-TONE GM110. The external loudspeaker should have an impedance of 4 Ohms. When using this socket, the internal loudspeaker is muted.
8 V-TONE GM110 4. AUDIO CONNECTIONS The BEHRINGER V-TONE GM110 is fitted with audio inputs and outputs in the form of 1/4" mono jacks. The exceptions to this are the headphones output and the D.I. OUT. Please ensure that only qualified personnel install and operate the device.
9 V-TONE GM110 6. WARRANTY 7. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract.
An important point after buying a device Behringer V-TONE GM110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer V-TONE GM110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer V-TONE GM110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer V-TONE GM110 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer V-TONE GM110 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer V-TONE GM110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer V-TONE GM110.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer V-TONE GM110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer V-TONE GM110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
