Instruction/ maintenance manual of the product BP48V242U Tripp Lite
Go to page of 16
1 Owner’ s Man ual BP36V14-2U BP48V24-2U BP72V12-2U External Battery Packs ESP A Ñ OL: p. 6 FRAN Ç AIS: p. 12 1111 W . 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 www.
2 Color Selection (BP48V24-2U Only) The BP4824-2U can be configured to match black or grey equipment. To match grey equipment, mount the grey mounting ears in front. To match black equipment, switch the grey front panel on the unit for the black front panel included, and mount the black mounting ears in front.
3 SUGGESTED INSTALLATION FOR 2-POST RACK ENCLOSURES 1) On both sides of your Battery Pack, connect one mounting ear (A) with four screws and flat washers (B) to the Battery Pack's middle four mounting holes. The mounting surface of the ear should face the front of the Battery Pack.
4 BP48V24-2U SUGGESTED TOWER INSTALLATION 1) On one side of your battery pack, connect one mounting ear (A) to the Battery Pack's four front mounting holes and another mounting ear (B) to the four rear mounting holes, using four screws and flat washers (C) with each ear.
5 TROUBLESHOOTING There is a fuse array inside the Battery Packs. If a heavy overload or short circuit is encountered, a fuse will open (blow). A Battery Pack with a blown fuse will deliver no output voltage at any load. A qualified technician must replace the fuses.
6 Manual de Operación BP36V14-2U BP48V24-2U BP72V12-2U Bancos de Baterias Externas 1111 W . 35th Street Chicago, IL 60609 USA Servicios al Clientes (USA): +1 (773) 869-1234 www.
7 SELECCION DE COLOR (UNICAMENTE MODELO BP48V24-2U) El modelo BP4824-2U puede ser configurado para coincidir con equipos de color negro o gris. Para equipos de color gris, utilice las orejuelas grises de montaje en el frente.
8 D E E I NSTALACION SUGERIDA PARA ENTORNOS DE RACK DE 2 POSTES 1 ) En ambos lados del Banco de Baterías, conecte una orejuela de montaje (A) con cuatro tornillos y arandelas planas (B) a los hoyos de montaje en la parte media del Banco de Baterías.
9 BP48V24-2U INSTALACION SUGERIDA EN FORMA VERTICAL (TORRE) 1) Conecte una orejuela de montaje a los cuatro hoyos de montaje de la parte lateral del Banco de Baterías (A) y otra orejuela de montaje (B) a los cuatro hoyos posteriores utilizando cuatro tornillos y arandelas planas (C) con cada orejuela.
10 GUIA DE RESOLUCION DE PROBLEMAS Existe un conjunto de fusibles internos en el Banco de Baterías. Si se presentara una sobrecarga severa o si ocurriera un corto circuito, uno de los fusibles se abrirá (se quemará). Esto causará que el Banco de Baterías no suministre voltaje de salida alguno independientemente de la carga conectada.
11 Manuel de l’Utilisateur BP36V14-2U BP48V24-2U BP72V12-2U Paquets Externes de Batterie 1111 W . 35th Street Chicago, IL 60609 USA Support à la client è le au (1) 773-869-1234 www.
12 SELECTION DE COULEUR (BP48V24-2U Seulement) Le BP4824-2U peut être configuré pour apparier le matériel noir ou gris. Pour apparier le matériel gris, montez les oreilles grises de support sur avant.
13 D E E INSTALLATION SUGG É R É E POUR INSERTIONS DE 2 MONTANTS RACK 1) Sur les deux côtés de votre Paquet de Batterie, reliez une oreille de montage (A) avec quatre vis et à rondelles plates (B) aux quatre inser- tions de support du milieu du Paquet de Batterie.
14 BP48V24-2U INSTALLATION SUGG É R É E EN TOUR 1) Sur un côté de votre Paquet de Batterie, reliez une oreille de montage (A) aux quatre insertions de support avant du Paquet de Batterie et une autre oreille de support (B) aux quatre insertions de support arrière, en utilisant quatre vis et rondelles plates (C) à chaque oreille.
15 D É PANNAGE Il y a un alignement de fusible à l’intérieur des Paquets de Batterie. Si une surcharge ou un court circuit se produit, un fusible va sauter. Un Paquet de Batterie avec un fusible qui a sauté ne fournira aucune tension de sortie à aucune charge.
16 93-1592 (20005167) 8/00 200005167 Rackmount Battery Pack Manual (Revised)French.p65 8/15/00, 1:56 PM 16.
An important point after buying a device Tripp Lite BP48V242U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite BP48V242U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite BP48V242U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite BP48V242U you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite BP48V242U will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite BP48V242U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite BP48V242U.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite BP48V242U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite BP48V242U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
