Instruction/ maintenance manual of the product BP240V33 Tripp Lite
Go to page of 9
Owner’ s Man ual Extra-High Capacity External DC Batter y Modules (240V DC/48V DC) Models: BP240V33, BP240V32 and BP48V165 Extends the runtime of select T ripp Lite UPS Systems (ref er to UPS System.
2 IMPOR T ANT SAFETY INSTR UCTIONS! SA VE THESE INSTRUCTIONS. This manual contains important instructions and warnings that should be followed during the installation and maintenance of all T ripp Lite BP240V33, BP240V32 and BP48V165 External Battery Modules.
3 Features Qualified service personnel should familiarize themselves with all features of the Battery Module prior to Installation, Connection and Maintenance. Fuse Holder (externally accessible, BP240V33 model only)*: fuses protect against short circuit damage.
4 Installation W ARNING! Follow all safety precautions outlined in the Safety section prior to installation. Failure to follow proper warnings and procedures may cause serious personal injury and may damage the product and void its warranty . Observe all lift point warning labels on the sides of the Battery Module’ s carton and housing.
UPS 5 Connection D ANGER! PO TENTIALL Y LETHAL HIGH V OL T A GE! FOR QU ALIFIED ELECTRICIANS ONL Y! BA TTER Y FUSES MUST BE INSERTED LAST DUE TO THE DANGER OF POTENTIAL ARCING OF CABLES. Follow all safety precautions outlined in the Safety section prior to connection.
6 Maintenance (continued) Internal Battery Replacement W ARNING! RISK OF ELECTRIC SHOCK AND ENERGY HAZARD . DO NO T REMO VE CO VER. NO USER SER VICEABLE P AR TS INSIDE. REFER SER VICING T O QU ALIFIED SER VICE PERSONNEL ONL Y . THE B A TTER Y MODULE RECEIVES PO WER FROM MORE THAN ONE SOURCE.
7 Maintenance (continued) Battery Replacement Procedure If fuses are externally accessible, remove them. If fuses are internally accessible, remove them in step 6. Disconnect Battery Module from the UPS System. Carefully wrap cable ends in electrical tape to keep them from coming in contact with each other or with any other objects.
8 Specifications Model: BP240V33 BP240V32 BP48V165 Series #: A GBP4988 A GBP4988 A GBP4988 External UPS System Connection T ype: Hardwire Black, 3-P oint Connector Blue, 2-P oint Connector Internal Ba.
1111 W . 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www .tripplite.com 2009XXXXX 93-2255_EN.
An important point after buying a device Tripp Lite BP240V33 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite BP240V33 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite BP240V33 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite BP240V33 you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite BP240V33 will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite BP240V33, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite BP240V33.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite BP240V33. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite BP240V33 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
